ufld_lr.pas

工廠倉庫管理系統

unit ufld_lr;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, RzButton, ExtCtrls, StdCtrls, DBCtrls, Mask, ComCtrls, RzDTP,
  Grids, DBGridEh, RzTabs, Menus, DB, ADODB, Buttons, FR_DSet, FR_DBSet,
  FR_Class, RzDBDTP;

type
  Tfrmfld_lr = class(TForm)
    Panel1: TPanel;
    Panel2: TPanel;
    Panel3: TPanel;
    RzBitBtn1: TRzBitBtn;
    RzBitBtn2: TRzBitBtn;
    RzBitBtn3: TRzBitBtn;
    RzBitBtn4: TRzBitBtn;
    RzBitBtn5: TRzBitBtn;
    RzBitBtn6: TRzBitBtn;
    RzBitBtn7: TRzBitBtn;
    dtp1: TRzDateTimePicker;
    dtp2: TRzDateTimePicker;
    Label1: TLabel;
    Label2: TLabel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label6: TLabel;
    Label8: TLabel;
    Label9: TLabel;
    DBEdit1: TDBEdit;
    DBEdit3: TDBEdit;
    DBEdit4: TDBEdit;
    DBEdit7: TDBEdit;
    DBMemo1: TDBMemo;
    Label10: TLabel;
    DBEdit8: TDBEdit;
    ADOQuery1: TADOQuery;
    ADOQuery2: TADOQuery;
    ADOQuery3: TADOQuery;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    RzPageControl1: TRzPageControl;
    TabSheet1: TRzTabSheet;
    TabSheet2: TRzTabSheet;
    DBGridEh1: TDBGridEh;
    DataSource1: TDataSource;
    DataSource2: TDataSource;
    RzBitBtn8: TRzBitBtn;
    DBNavigator1: TDBNavigator;
    GroupBox1: TGroupBox;
    Label12: TLabel;
    Label13: TLabel;
    Label14: TLabel;
    Label15: TLabel;
    Label16: TLabel;
    Label17: TLabel;
    DBEdit9: TDBEdit;
    DBEdit10: TDBEdit;
    DBEdit11: TDBEdit;
    DBEdit12: TDBEdit;
    DBEdit13: TDBEdit;
    RzBitBtn9: TRzBitBtn;
    RzBitBtn10: TRzBitBtn;
    ADOQuery4: TADOQuery;
    N2: TMenuItem;
    frReport1: TfrReport;
    frDBDataSet1: TfrDBDataSet;
    frDBDataSet2: TfrDBDataSet;
    ADOQuery5: TADOQuery;
    DBComboBox1: TDBComboBox;
    Label7: TLabel;
    Edit1: TEdit;
    Edit2: TEdit;
    RzToolbarButton1: TRzToolbarButton;
    Label11: TLabel;
    DBComboBox3: TDBComboBox;
    Label18: TLabel;
    DBEdit2: TDBEdit;
    RzToolbarButton3: TRzToolbarButton;
    DBEdit5: TDBEdit;
    RzToolbarButton2: TRzToolbarButton;
    DBEdit6: TDBEdit;
    dtprq: TRzDBDateTimePicker;
    DBEdit14: TDBEdit;
    procedure RzBitBtn1Click(Sender: TObject);
    procedure RzBitBtn2Click(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure csh();
    procedure DBEdit1Change(Sender: TObject);
    procedure dtp1Exit(Sender: TObject);
    procedure dtp2Exit(Sender: TObject);
    procedure RzBitBtn3Click(Sender: TObject);
    procedure RzBitBtn8Click(Sender: TObject);
    procedure TabSheet2Enter(Sender: TObject);
    procedure RzBitBtn9Click(Sender: TObject);
    procedure RzBitBtn10Click(Sender: TObject);
    procedure Edit1KeyPress(Sender: TObject; var Key: Char);
    procedure Edit2KeyPress(Sender: TObject; var Key: Char);
    procedure DBGridEh1DblClick(Sender: TObject);
    procedure RzBitBtn7Click(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure RzBitBtn4Click(Sender: TObject);
    procedure RzBitBtn5Click(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure RzBitBtn6Click(Sender: TObject);
    procedure DBEdit3Exit(Sender: TObject);
    procedure DBEdit3Enter(Sender: TObject);
    procedure DBEdit5Enter(Sender: TObject);
    procedure DBEdit5Exit(Sender: TObject);
    procedure RzToolbarButton3Click(Sender: TObject);
    procedure RzToolbarButton1Click(Sender: TObject);
    procedure RzToolbarButton2Click(Sender: TObject);
    procedure DBEdit7Enter(Sender: TObject);
    procedure DBEdit7Exit(Sender: TObject);
    procedure DBGridEh1TitleClick(Column: TColumnEh);
    function sfscwb():boolean;
    procedure DBGridEh1DrawColumnCell(Sender: TObject; const Rect: TRect;
      DataCol: Integer; Column: TColumnEh; State: TGridDrawState);
    procedure isactive;
  private
    { Private declarations }
    lldh:string;
    sfsl:single;
    isedit:boolean;
  public
    { Public declarations }
  end;

var
  frmfld_lr: Tfrmfld_lr;

implementation
uses uconst,ufunction,udm1,ucx,uddhm_lb,ugyslb,ugdwl,uhthm_lb,uemplyer_lb,uhtlb;
{$R *.dfm}
procedure tfrmfld_lr.isactive;
begin
  if isedit then
  begin
       dbedit3.ReadOnly:=false;
       dbedit2.ReadOnly:=false;
       dbedit4.ReadOnly:=false;
       dbedit5.ReadOnly:=false;
       dbcombobox3.ReadOnly:=false;
       dbcombobox1.ReadOnly:=false;
       dbmemo1.ReadOnly:=false;
       dtprq.ReadOnly:=false;
       dbedit7.ReadOnly:=false;
  end else begin
       dbedit3.ReadOnly:=true;
       dbedit2.ReadOnly:=true;
       dbedit4.ReadOnly:=true;
       dbedit5.ReadOnly:=true;
       dbcombobox3.ReadOnly:=true;
       dbcombobox1.ReadOnly:=true;
       dbmemo1.ReadOnly:=true;
       dtprq.ReadOnly:=true;
       dbedit7.ReadOnly:=true;
  end;

end;
function tfrmfld_lr.sfscwb():boolean;
begin
strsql:='select gdhm from ddk where yscwb=1 and gdhm='+''''+trim(dbedit3.Text)+'''';
adoexect(adoquery3,strsql);
if not (adoquery3.Recordset.eof and adoquery3.Recordset.BOF) then
   begin
       showmessage('该工单已经完成生产,不能再做修改!');
       result:=true;
   end else begin
       result:=false;
   end;
end;
procedure tfrmfld_lr.csh();
begin
if adoquery2.Active then adoquery1.Close;
adoquery2.SQL.Clear;
strsql:='select fldh as 发料单号,lldh as 领料单号,ylbm as 领料部门,llr as 领料人,'+
'gdhm as 工单号码,gcdh as 工程单号,djr as 发料人,srrq as 日期,bz as 备注,chang as 厂别,'+
'flrq as 发料日期,fllb as 发料类别 from fld_main where'+
' srrq>=:rq1 and srrq<=:rq2 and fllb<>'+''''+'其它发料'+''''+'order by fldh desc';
adoquery2.SQL.add(strsql);
adoquery2.Parameters.ParamByName('rq1').Value:=dtp1.Date;
adoquery2.Parameters.ParamByName('rq2').Value:=dtp2.Date;
adoquery2.Open;

end;
procedure Tfrmfld_lr.RzBitBtn1Click(Sender: TObject);
begin
if not qxjc(userid,'fld_add') then exit;
adoquery2.Append;
isedit:=true;
isactive;
RzBitBtn1.Enabled:=false;
RzBitBtn2.Enabled:=false;
RzBitBtn3.Enabled:=true;
dbedit4.Text:=username;
dbedit14.Text:='正常发料';
dbedit8.Text:=datetostr(date);
dbedit6.Text:=datetostr(date);
dtprq.date:=date;
DBEdit3.ReadOnly:=false;
dbcombobox1.ReadOnly:=false;
DBEdit7.ReadOnly:=false;
dbmemo1.ReadOnly:=false;
lldh:='';
end;

procedure Tfrmfld_lr.RzBitBtn2Click(Sender: TObject);
begin
if sfscwb then exit;
if adoquery2.Recordset.EOF and adoquery2.Recordset.BOF then exit;
if not qxjc(userid,'fld_edit') and (username<>trim(dbedit4.Text)) then exit;
adoquery2.Edit;
isedit:=true;
isactive;
lldh:=trim(dbedit2.Text);
RzBitBtn1.Enabled:=false;
RzBitBtn2.Enabled:=false;
RzBitBtn3.Enabled:=true;
DBEdit3.ReadOnly:=false;
DBEdit7.ReadOnly:=false;
dbcombobox1.ReadOnly:=false;
dbmemo1.ReadOnly:=false;
dbedit4.Text:=username;
dbedit8.Text:=datetostr(date);
end;

procedure Tfrmfld_lr.FormCreate(Sender: TObject);
begin
dtp1.Date:=date-30;
dtp2.Date:=date;
dbcombobox3.Items.Clear;
dbcombobox3.Items.Add('佳盈');
dbcombobox3.Items.Add('力盈');
adoquery1.Connection:=dm1.ADOConnection1;
adoquery2.Connection:=dm1.ADOConnection1;
adoquery3.Connection:=dm1.ADOConnection1;
adoquery4.Connection:=dm1.ADOConnection1;
adoquery5.Connection:=dm1.ADOConnection1;
strsql:='select classname from department order by classname asc';
adoexect(adoquery3,strsql);
if not(adoquery3.Recordset.eof and adoquery3.Recordset.bof) then
   begin
   dbcombobox1.Items.Clear;
   adoquery3.First;
   while not adoquery3.Eof do
       begin
       dbcombobox1.Items.Add(trim(adoquery3.fieldbyname('classname').AsString));
       adoquery3.Next;
       end;
   end;
adoquery3.Close;
csh;
if adoquery2.Recordset.eof and adoquery2.Recordset.BOF then exit;
strsql:='select * from view_FlD where 发料单号='+''''+trim(dbedit1.text)+'''';
adoexect(adoquery1,strsql);
end;

procedure Tfrmfld_lr.DBEdit1Change(Sender: TObject);
begin
if not adoquery2.Active then exit;
strsql:='select * from view_Fld where 发料单号='+''''+trim(dbedit1.Text)+'''';
adoexect(adoquery1,strsql);

end;

procedure Tfrmfld_lr.dtp1Exit(Sender: TObject);
begin
csh;
end;

procedure Tfrmfld_lr.dtp2Exit(Sender: TObject);
begin
csh;
end;

procedure Tfrmfld_lr.RzBitBtn3Click(Sender: TObject);
var
qz:string;
begin
IF TRIM(dbedit2.Text)='' then
   begin
   showmessage('领料单号不能为空!');
   dbedit2.SetFocus;
   exit;
   end;
IF TRIM(dbedit3.Text)='' then
   begin
   showmessage('工单号码不能为空!');
   dbedit3.SetFocus;
   exit;
   end;
IF TRIM(dbcombobox1.Text)='' then
   begin
   showmessage('领料部门不能为空!');
   dbcombobox1.SetFocus;
   exit;
   end;
IF TRIM(dbcombobox3.Text)='' then
   begin
   showmessage('厂别不能为空!');
   dbcombobox3.SetFocus;
   exit;
   end;
if adoquery2.State in [dsinsert] then
   begin
   qz:='FlDH'+formatdatetime('yy',now)+
   formatdatetime('mm',now)+formatdatetime('dd',date);
   strsql:='select * from Fld_main where Fldh like'+''''+qz+'%'+''''+'order by Fldh asc';
   adoexect(adoquery3,strsql);
   dbedit1.Text:=creatdh(adoquery3,11,qz);
   end;
if (lldh<>trim(dbedit2.Text)) and (adoquery2.State in[dsedit]) then
   begin
       if messagebox(handle,'该发货单已发有物料，是否要将物料还原重新发货？','询问',mb_yesno+mb_iconquestion)=idyes then
          begin
          try
              strsql:='exec p_fld_del '+trim(dbedit1.Text);
              adodel(adoquery3,strsql);
          except
              showmessage('发货单还原失败！');
              adoquery3.Close;
              exit;
          end;
          end else begin
          exit;
          end
   end;
{
if (adoquery2.State in[dsinsert]) or ((adoquery2.State in[dsedit]) and (lldh<>trim(dbedit2.Text))) then
   begin