writespi3.c

Mplab C30编译器

#if defined(__PIC24F__)
#include <p24Fxxxx.h>
#endif
#include "spi.h"

/********************************************************************************
Function Prototype : void WriteSPI3(unsigned int data_out)
 
Include            : spi.h
 
Description        : This function writes the data to be transmitted 
                     into the Transmit Buffer (SPIxBUF) register.
 
Arguments          : data_out - This is the data to be transmitted which 
                     will be stored in SPI buffer.
 
Return Value       : None
 
Remarks            : This function writes the data (byte/word) to be transmitted
                     into the transmit buffer.
                     If 16-bit communication is enabled, the 16-bit value is 
                     written to the transmit buffer.
                     If 8-bit communication is enabled, then upper byte is masked
                     and then written to the transmit buffer.
**********************************************************************************/
#ifdef _SPI_V2_3

void WriteSPI3(unsigned int data_out)
{
    if (SPI3CON1bits.MODE16)           /* word write */
        SPI3BUF = data_out;
    else
        SPI3BUF = data_out & 0xff;	  /*  byte write  */
}
#else
#warning "Does not build on this target"
#endif