configintoc2.c

Mplab C30编译器

#if defined(__PIC24F__)
#include <p24Fxxxx.h>
#endif
#include <outcompare.h>

#if defined( _OCMP2) || defined (_OCMP_V4_2)
/***********************************************************************************
Function Prototype : void ConfigIntOC2(unsigned int config)

Include            : outcompare.h
 
Description        : This function configures the Output Compare interrupt.
 
Arguments          : config - Output Compare interrupt priority and enable/disable
                     information as defined below
						Interrupt enable/disable						
						   OC_INT_ON						
						   OC_INT_OFF						
						Interrupt Priority						
						   OC_INT_PRIOR_0						
						   OC_INT_PRIOR_1						
						   OC_INT_PRIOR_2		
						   OC_INT_PRIOR_3						
						   OC_INT_PRIOR_4						
						   OC_INT_PRIOR_5						
						   OC_INT_PRIOR_6						
						   OC_INT_PRIOR_7
 
Return Value        : None
 
Remarks             : This function clears the Interrupt Flag bit and then sets 
                      the interrupt priority and enables/disables the interrupt.
************************************************************************************/

void ConfigIntOC2(unsigned int config)
{
    IFS0bits.OC2IF = 0;                   /* Clear IF bit */
    IPC1bits.OC2IP = (config &0x0007);    /* Assign Interrupt Priority */ 
    IEC0bits.OC2IE = (config &0x0008)>>3; /* Enable/disable Interrupt */
}

#else
#warning "Does not build on this target"
#endif