configintoc8_v4.c

Mplab C30编译器

#if defined(__PIC24F__)
#include <p24Fxxxx.h>
#endif
#include <outcompare.h>

#ifdef _OCMP_V4_8
/***********************************************************************************
Function Prototype : void ConfigIntOC8(unsigned int config)

Include            : outcompare.h
 
Description        : This function configures the Output Compare interrupt.
 
Arguments          : config - Output Compare interrupt priority and enable/disable
                     information as defined below
						Interrupt enable/disable						
						   OC_INT_ON						
						   OC_INT_OFF						
						Interrupt Priority						
						   OC_INT_PRIOR_0						
						   OC_INT_PRIOR_1						
						   OC_INT_PRIOR_2		
						   OC_INT_PRIOR_3						
						   OC_INT_PRIOR_4						
						   OC_INT_PRIOR_5						
						   OC_INT_PRIOR_6						
						   OC_INT_PRIOR_7
 
Return Value        : None
 
Remarks             : This function clears the Interrupt Flag bit and then sets 
                      the interrupt priority and enables/disables the interrupt.
************************************************************************************/
void ConfigIntOC8(unsigned int config)
{
    IFS2bits.OC8IF = 0;                  /* Clear IF bit */
    IPC11bits.OC8IP = (config &0x0007);   /* Assign Interrupt Priority */
    IEC2bits.OC8IE = (config &0x0008)>>3;/* Enable/disable Interrupt */
}

#else
#warning "Does not build on this target"
#endif