timer.h

Mplab C30编译器

void OpenTimer5(unsigned int config, unsigned int timer)  __attribute__ ((section
(".libperi")));

/* CloseTimer5
 * Disables Timer5
 */
void CloseTimer5(void)  __attribute__ ((section (".libperi")));

/* ReadTimer5
 * Reads Timer5
 */
unsigned int ReadTimer5(void)  __attribute__ ((section (".libperi")));

/* WriteTimer5
 * Writes Timer5
 */
void WriteTimer5(unsigned int timer)  __attribute__ ((section (".libperi")));

/* Config Int Timer 5*/
void ConfigIntTimer5(unsigned int config)  __attribute__ ((section (".libperi")));

/* Timer 45 mode using Timer 4 and Timer 5 */

/* OpenTimer45 */
void OpenTimer45(unsigned int config , unsigned long timer)  __attribute__ ((section
(".libperi")));

/* CloseTimer45 */
void CloseTimer45(void)  __attribute__ ((section (".libperi")));

/* ReadTimer45 */
unsigned long ReadTimer45(void)  __attribute__ ((section (".libperi")));

/* WriteTimer45 */
void WriteTimer45(unsigned long timer)  __attribute__ ((section (".libperi")));

/* Config Int Timer 45*/
void ConfigIntTimer45(unsigned int config)  __attribute__ ((section (".libperi")));

#endif

#ifdef _T6IF

/* Timer6 Control Register (T6CON) Bit Defines */
#define T6_ON               0xffff      /* Timer6 ON */
#define T6_OFF              0x7fff      /* Timer6 OFF */

#define T6_IDLE_CON         0xdfff      /* operate during sleep */
#define T6_IDLE_STOP        0xffff      /* stop operation during sleep */

#define T6_GATE_ON          0xffff      /* Timer Gate time accumulation enabled */
#define T6_GATE_OFF         0xffbf      /* Timer Gate time accumulation disabled */

#define T6_PS_1_1           0xffcf      /* Prescaler 1:1   */
#define T6_PS_1_8           0xffdf      /*           1:8   */
#define T6_PS_1_64          0xffef      /*           1:64  */
#define T6_PS_1_256         0xffff      /*           1:256 */

#define T6_SOURCE_EXT       0xffff      /* External clock source */
#define T6_SOURCE_INT       0xfffd      /* Internal clock source */

#define T6_32BIT_MODE_ON    0xffff /* Timer 6 and Timer 7 form a 32 bit Timer */
#define T6_32BIT_MODE_OFF   0xfff7 

/* defines for Timer Interrupts */
#define T6_INT_PRIOR_7      0xffff      /* 111 = Interrupt is priority 7 */ 
#define T6_INT_PRIOR_6      0xfffe      /* 110 = Interrupt is priority 6 */
#define T6_INT_PRIOR_5      0xfffd      /* 101 = Interrupt is priority 5 */
#define T6_INT_PRIOR_4      0xfffc      /* 100 = Interrupt is priority 4 */
#define T6_INT_PRIOR_3      0xfffb      /* 011 = Interrupt is priority 3 */
#define T6_INT_PRIOR_2      0xfffa      /* 010 = Interrupt is priority 2 */
#define T6_INT_PRIOR_1      0xfff9      /* 001 = Interrupt is priority 1 */
#define T6_INT_PRIOR_0      0xfff8      /* 000 = Interrupt is priority 0 */

#define T6_INT_ON           0xffff      /* Interrupt Enable */  
#define T6_INT_OFF          0xfff7      /* Interrupt Disable */

/* Macros to  Enable/Disable interrupts and set Interrupt priority of Timer 4 */
#define EnableIntT6                    _T6IE = 1
#define DisableIntT6                   _T6IE = 0
#define SetPriorityIntT6(priority)     _T6IP = priority

/* Timer6 Function Declarations */

/* OpenTimer6
 * Configures Timer6
 */
void OpenTimer6(unsigned int config , unsigned int timer )  __attribute__ ((section
(".libperi")));

/* CloseTimer6
 * Disables Timer6
 */
void CloseTimer6(void)  __attribute__ ((section (".libperi")));

/* ReadTimer6
 * Reads Timer6
 */
unsigned int ReadTimer6(void)  __attribute__ ((section (".libperi")));

/* WriteTimer6
 * Writes Timer6
 */
void WriteTimer6(unsigned int timer )  __attribute__ ((section (".libperi")));

/* Config Int Timer 6*/
void ConfigIntTimer6(unsigned int config)  __attribute__ ((section (".libperi")));

#endif

#ifdef _T7IF

/* Timer7 Config Bit Defines */

#define T7_ON               0xffff      /* Timer7 ON */
#define T7_OFF              0x7fff      /* Timer7 OFF */

#define T7_IDLE_CON         0xdfff      /* operate during sleep */
#define T7_IDLE_STOP        0xffff      /* stop operation during sleep */

#define T7_GATE_ON          0xffff      /* Timer Gate time accumulation enabled */
#define T7_GATE_OFF         0xffbf      /* Timer Gate time accumulation disabled */

#define T7_PS_1_1           0xffcf      /* Prescaler 1:1   */
#define T7_PS_1_8           0xffdf      /*           1:8   */
#define T7_PS_1_64          0xffef      /*           1:64  */
#define T7_PS_1_256         0xffff      /*           1:256 */

#define T7_SOURCE_EXT       0xffff      /* External clock source */
#define T7_SOURCE_INT       0xfffd      /* Internal clock source */

/* defines for Timer Interrupts */
#define T7_INT_PRIOR_7      0xffff      /* 111 = Interrupt is priority 7 */
#define T7_INT_PRIOR_6      0xfffe      /* 110 = Interrupt is priority 6 */
#define T7_INT_PRIOR_5      0xfffd      /* 101 = Interrupt is priority 5 */
#define T7_INT_PRIOR_4      0xfffc      /* 100 = Interrupt is priority 4 */
#define T7_INT_PRIOR_3      0xfffb      /* 011 = Interrupt is priority 3 */
#define T7_INT_PRIOR_2      0xfffa      /* 010 = Interrupt is priority 2 */
#define T7_INT_PRIOR_1      0xfff9      /* 001 = Interrupt is priority 1 */
#define T7_INT_PRIOR_0      0xfff8      /* 000 = Interrupt is priority 0 */

#define T7_INT_ON           0xffff      /* Interrupt Enable */
#define T7_INT_OFF          0xfff7      /* Interrupt Disable */

/* Macros to  Enable/Disable interrupts and set Interrupt priority of Timer 7 */
#define EnableIntT7                    _T7IE = 1
#define DisableIntT7                   _T7IE = 0
#define SetPriorityIntT7(priority)     _T7IP = priority

/* Timer7 Function Declarations */

/* OpenTimer7
 * Configures Timer7
 */
void OpenTimer7(unsigned int config, unsigned int timer)  __attribute__ ((section
(".libperi")));

/* CloseTimer7
 * Disables Timer7
 */
void CloseTimer7(void)  __attribute__ ((section (".libperi")));

/* ReadTimer7
 * Reads Timer7
 */
unsigned int ReadTimer7(void)  __attribute__ ((section (".libperi")));

/* WriteTimer7
 * Writes Timer7
 */
void WriteTimer7(unsigned int timer)  __attribute__ ((section (".libperi")));

/* Config Int Timer 7*/
void ConfigIntTimer7(unsigned int config)  __attribute__ ((section (".libperi")));

/* Timer 67 mode using Timer 6 and Timer 7 */

/* OpenTimer67 */
void OpenTimer67(unsigned int config , unsigned long timer)  __attribute__ ((section
(".libperi")));

/* CloseTimer67 */
void CloseTimer67(void)  __attribute__ ((section (".libperi")));

/* ReadTimer67 */
unsigned long ReadTimer67(void)  __attribute__ ((section (".libperi")));

/* WriteTimer67 */
void WriteTimer67(unsigned long timer)  __attribute__ ((section (".libperi")));

/* Config Int Timer 67*/
void ConfigIntTimer67(unsigned int config)  __attribute__ ((section (".libperi")));

#endif 

#ifdef _T8IF

/* Timer8 Control Register (T8CON) Bit Defines */

#define T8_ON               0xffff      /* Timer8 ON */
#define T8_OFF              0x7fff      /* Timer8 OFF */

#define T8_IDLE_CON         0xdfff      /* operate during sleep */
#define T8_IDLE_STOP        0xffff      /* stop operation during sleep */

#define T8_GATE_ON          0xffff      /* Timer8 Gate time accumulation enabled  */
#define T8_GATE_OFF         0xffbf      /* Timer8 Gate time accumulation disabled */

#define T8_PS_1_1           0xffcf      /* Prescaler 1:1   */
#define T8_PS_1_8           0xffdf      /*           1:8   */
#define T8_PS_1_64          0xffef      /*           1:64  */
#define T8_PS_1_256         0xffff      /*           1:256 */

#define T8_32BIT_MODE_ON    0xffff      /* Timer 8 and Timer 9 form a 32 bit Timer */
#define T8_32BIT_MODE_OFF   0xfff7      

#define T8_SOURCE_EXT       0xffff      /* External clock source */
#define T8_SOURCE_INT       0xfffd      /* Internal clock source */

/* defines for Timer Interrupts */
#define T8_INT_PRIOR_7      0xffff      /* 111 = Interrupt is priority 7 */ 
#define T8_INT_PRIOR_6      0xfffe      /* 110 = Interrupt is priority 6 */
#define T8_INT_PRIOR_5      0xfffd      /* 101 = Interrupt is priority 5 */
#define T8_INT_PRIOR_4      0xfffc      /* 100 = Interrupt is priority 4 */
#define T8_INT_PRIOR_3      0xfffb      /* 011 = Interrupt is priority 3 */
#define T8_INT_PRIOR_2      0xfffa      /* 010 = Interrupt is priority 2 */
#define T8_INT_PRIOR_1      0xfff9      /* 001 = Interrupt is priority 1 */
#define T8_INT_PRIOR_0      0xfff8      /* 000 = Interrupt is priority 0 */

#define T8_INT_ON           0xffff      /* Interrupt Enable */  
#define T8_INT_OFF          0xfff7      /* Interrupt Disable */

/* Macros to  Enable/Disable interrupts and set Interrupt priority of Timers 2*/
#define EnableIntT8                    _T8IE = 1
#define DisableIntT8                   _T8IE = 0
#define SetPriorityIntT8(priority)     _T8IP = priority

/* Timer8 Function Prototypes */

/* OpenTimer8 */
void OpenTimer2(unsigned int config, unsigned int period) __attribute__ ((section
(".libperi")));

/* CloseTimer8 */
void CloseTimer8(void) __attribute__ ((section (".libperi")));

/* ReadTimer8 */
unsigned int ReadTimer8(void) __attribute__ ((section (".libperi")));

/* WriteTimer8 */
void WriteTimer8( unsigned int timer) __attribute__ ((section (".libperi")));

/* ConfigIntTimer8 */
void ConfigIntTimer8(unsigned int ) __attribute__ ((section (".libperi")));

#endif

#ifdef _T9IF

/* Timer9 Control Register (T3CON) Bit Defines */

#define T9_ON               0xffff      /* Timer9 ON */
#define T9_OFF              0x7fff      /* Timer9 OFF */

#define T9_IDLE_CON         0xdfff      /* operate during sleep */
#define T9_IDLE_STOP        0xffff      /* stop operation during sleep */

#define T9_GATE_ON          0xffff      /* Timer9 Gate  time accumulation enabled  */
#define T9_GATE_OFF         0xffbf      /* Timer Gate time accumulation disabled */

#define T9_PS_1_1           0xffcf      /* Prescaler 1:1   */
#define T9_PS_1_8           0xffdf      /*           1:8   */
#define T9_PS_1_64          0xffef      /*           1:64  */
#define T9_PS_1_256         0xffff      /*           1:256 */
#define T9_SOURCE_EXT       0xffff      /* External clock source */
#define T9_SOURCE_INT       0xfffd      /* Internal clock source */

/* defines for Timer Interrupts */
#define T9_INT_PRIOR_7      0xffff      /* 111 = Interrupt is priority 7 */ 
#define T9_INT_PRIOR_6      0xfffe      /* 110 = Interrupt is priority 6 */
#define T9_INT_PRIOR_5      0xfffd      /* 101 = Interrupt is priority 5 */
#define T9_INT_PRIOR_4      0xfffc      /* 100 = Interrupt is priority 4 */
#define T9_INT_PRIOR_3      0xfffb      /* 011 = Interrupt is priority 3 */
#define T9_INT_PRIOR_2      0xfffa      /* 010 = Interrupt is priority 2 */
#define T9_INT_PRIOR_1      0xfff9      /* 001 = Interrupt is priority 1 */
#define T9_INT_PRIOR_0      0xfff8      /* 000 = Interrupt is priority 0 */

#define T9_INT_ON           0xffff      /* Interrupt Enable */  
#define T9_INT_OFF          0xfff7      /* Interrupt Disable */

/* Macros to  Enable/Disable interrupts and set Interrupt priority of Timers 3*/
#define EnableIntT9                    _T9IE = 1
#define DisableIntT9                   _T9IE = 0
#define SetPriorityIntT9(priority)     _T9IP = priority

/* Timer9 Function Prototypes */

/* OpenTimer9 */
void OpenTimer9(unsigned int config, unsigned int timer)  __attribute__ ((section
(".libperi")));

/* CloseTimer9 */
void CloseTimer9(void)  __attribute__ ((section (".libperi")));

/* ReadTimer9 */
unsigned int ReadTimer9(void)  __attribute__ ((section (".libperi")));

/* WriteTimer9 */
void WriteTimer9( unsigned int timer)  __attribute__ ((section (".libperi")));

/* ConfigIntTimer9  */
void  ConfigIntTimer9(unsigned int config)  __attribute__ ((section (".libperi")));

/* Timer 89 mode using Timer 8 and Timer9*/

/*Timer 89 bit mode Prototypes*/

/* OpenTimer89 */
void OpenTimer89(unsigned int config, unsigned long period)  __attribute__ ((section
(".libperi")));

/* CloseTimer89 */
void CloseTimer89(void)  __attribute__ ((section (".libperi")));

/* ReadTimer89 */
unsigned long ReadTimer89(void)  __attribute__ ((section (".libperi")));

/* WriteTimer89 */
void WriteTimer89(unsigned long timer)  __attribute__ ((section (".libperi")));

/* Config Int Timer 89*/
void ConfigIntTimer89(unsigned int config)  __attribute__ ((section (".libperi")));

#endif

#endif