f2m_bluetooth.c

单片机像计算机发送、接收数据、串口中断、蓝牙通讯

#include <msp430x14x.h>
#include "FreeRTOS.h"
#include "task.h"
#include "F2M_Bluetooth.h"
#include "Menu.h"
#include "LCD_Library.h"
#include "global.h"
#include "TimerTask.h"
#include <string.h>
#include <stdio.h>



//static unsigned char F2M_RED_CMD[][]={
//																			}

#define F2MBT_STACK_SIZE		100

unsigned char PairingSetting[]={0x00,				 	// No Encryption
																		0x00,					// Authentication
																		0x00};				// no effect for master

volatile unsigned char F2M_RSP_BUFFER[0x2a];
volatile unsigned char UART_BUFFER[F2M_BUFFER_LENGTH];			// Serial Communication Buffer
unsigned char INQUIRY_FILTER_STR[12] = {'C','a','r','d','i','o','A','n','g','e','l',0x00};
static volatile unsigned char BUFFER_FLAG = 0;
static char F2M_PAIR_NAME[0x20];
xTaskHandle F2MBT_Handle;																// Pairing name
//static unsigned char F2M_PAIR_ADDRESS[6];												// Pairing address
//static unsigned char F2M_PAIR_PASSKEY[17] = "Philips123";
//unsigned char debugg;
//volatile unsigned char debuff = 1;
//static union 
union
 {
 		unsigned char ADD_PASSKEY[0x17];
 		struct
 		{
 				unsigned char ADDRESS[6];													// Pairing address
				char PASSKEY[17];
 		}_;
 }F2M_PAIR;


/*
 * 	  BUFFER_FLAG
 * 		BIT0  F2M_OVERFLOW_FLAG    1-OVERFLOW
 * 		BIT1  F2M_LOOP_FLAG				 1-pBUF_WRT rewrites the Buffer
 * 		BIT2  F2M_RENEW_FLAG			 1-Buffer data is renewed
 */

static unsigned char	pBUF_WRT = 0;					// Buffer Writing Point
static unsigned char	pBUF_RED = 0;					// Buffer Reading Point

char ICHAR;


static void F2M_Delay(unsigned int i)
{
		for(;i>0;i--);
}

unsigned char F2M_GetBufferFlag(unsigned char Bit)
{
		return (BUFFER_FLAG & Bit)? 1:0;
}

void F2M_SetBufferFlag(unsigned char Bit)
{
		BUFFER_FLAG |= Bit;
}

void F2M_ClrBufferFlag(unsigned char Bit)
{
		BUFFER_FLAG &= ~Bit;
}

void F2M_SetMspUartBR(unsigned int BaudrateConst)
{
		 portENTER_CRITICAL();
		 {
		 #ifdef __F2M_UART1
		 		
		 		UBR01 = (unsigned char)(BaudrateConst&0x00ff);                             
		  	UBR11 = (unsigned char)((BaudrateConst&0xff00)>>8);
		 		
		 #else
				
		 		UBR00 = (char)(BaudrateConst&0x00ff);                             
		  	UBR10 = (char)((BaudrateConst&0xff00)>>8);
		 		
		 #endif
		 }
		 portEXIT_CRITICAL();
}

void F2M_InitUART()
{
			unsigned char i;
			_F2M_INIT_PORTS();												// Init F2M Ports
		 	//Init UART 
		  //	portENTER_CRITICAL();
		  // {
#ifdef __F2M_UART1															// Using the UART1
		 	P3SEL |= BIT6|BIT7;                       // P3.6,7 = USART1 TXD/RXD
		 	ME2 |= UTXE1 + URXE1;                     // Enabled USART1 TXD/RXD
		  UCTL1 |= CHAR;                            // 8-bit character
		  UTCTL1 |= SSEL1;                          // UCLK = SMCLK
		  F2M_SetMspUartBR(F2M_USART_COMM);         // Set Baudrate
		  UMCTL1 = 0x00;                            // no modulation
		  UCTL1 &= ~SWRST;                          // Initialize USART state machine
		  IE2 |= URXIE1;                            // Enable USART1 RX interrupt
#else																						// Using the UART0
		 	P3SEL |= BIT5|BIT4;                       // P3.4,5 = USART0 TXD/RXD
		 	ME1 |= UTXE0 + URXE0;                     // Enabled USART1 TXD/RXD
		  UCTL0 |= CHAR;                            // 8-bit character
		  UTCTL0 |= SSEL1;                          // UCLK = SMCLK
		  F2M_SetMspUartBR(F2M_USART_COMM);         // Set Baudrate
		  UMCTL0 = 0x00;                            // no modulation
		  UCTL0 &= ~SWRST;                          // Initialize USART state machine
		  IE1 |= URXIE0;                            // Enable USART1 RX interrupt
#endif
		 //}
		 //portEXIT_CRITICAL();
		 
}

unsigned char F2M_ReadBuffer()
{
		unsigned char Buffer_value;
		Buffer_value = UART_BUFFER[pBUF_RED];
		pBUF_RED++;
		if(pBUF_RED == F2M_BUFFER_LENGTH)
  	{
  	 		pBUF_RED = 0;														// Rewriting the Buffer
  	 		BUFFER_FLAG &=	~F2M_LOOP_FLAG;				  // Clear Rewirting flag
  	}	
  	
  	if((pBUF_RED == pBUF_WRT) && (!F2M_GetBufferFlag(F2M_LOOP_FLAG)))
		{
				BUFFER_FLAG &=	~F2M_RENEW_FLAG;
		}
		
		if(BUFFER_FLAG & F2M_OVERFLOW_FLAG) 
		{
				BUFFER_FLAG &= ~F2M_OVERFLOW_FLAG;			// Clear the overflow flag
				_F2M_CLR_CTS();													// Flow control
		}
		return Buffer_value;
}

void F2M_Command(unsigned char Command, unsigned char Length, unsigned char* pParameters)
{
		pBUF_WRT = 0;
		pBUF_RED = 0;															// Override the uart buffer
		BUFFER_FLAG &= ~(BIT0|BIT1|BIT2);
		
#ifdef __F2M_UART1
		while (!(IFG2 & UTXIFG1));                // USART1 TX buffer ready?
  	TXBUF1 = Command;													// Send Byte
 		while (!(IFG2 & UTXIFG1));                // USART1 TX buffer ready?
  	TXBUF1 = Length;													// Send Byte
		while (!(IFG2 & UTXIFG1));                // USART1 TX buffer ready?
		while(Length--)
		{
		  	TXBUF1 = *pParameters++;							// Send Byte
		  	while (!(IFG2 & UTXIFG1));            // USART1 TX buffer ready?
		}
#else
		while (!(IFG1 & UTXIFG0));                // USART0 TX buffer ready?
  	TXBUF0 = Command;													// Send Byte
 		while (!(IFG1 & UTXIFG0));                // USART0 TX buffer ready?
  	TXBUF0 = Length;													// Send Byte
  	while (!(IFG1 & UTXIFG0));                // USART0 TX buffer ready?
		while(Length--)
		{
				TXBUF0 = *pParameters++;						  // Send Byte
				while (!(IFG1 & UTXIFG0));            // USART0 TX buffer ready?
		}
#endif
}

/*
unsigned char F2M_OverFlow()
{
		return (BUFFER_FLAG & F2M_OVERFLOW_FLAG);
}
*/
/*
unsigned char F2M_BufRenew()
{
		return (BUFFER_FLAG & F2M_RENEW_FLAG);
}
*/

void F2M_GetResponse()
{
		//unsigned char* pB = F2M_RSP_BUFFER;
		unsigned char i = 0;
		F2M_RSP_BUFFER[1] = 0x01;
		while(i<2+F2M_RSP_BUFFER[1])
		{
			while( !F2M_GetBufferFlag(F2M_RENEW_FLAG) );
				 F2M_RSP_BUFFER[i++] = F2M_ReadBuffer();
		}
		/*
		if(F2M_RSP_BUFFER[2] == 0xfc )
		{
			while(1)
			{
			i = 15;
			}
		}
		*/
}

unsigned char F2M_EnterCommandMode()
{
		unsigned char i;
		const unsigned char F2M_CMD_ENTHCM[] = {0xff,0x00,0x55,0xaa};		//HCM Enter Code
		// ONLY FOR F2M03AC2!!!!!
															// Set CTS high to close down the probable Bluetooth connection																				
		_F2M_SET_PIO2();																						// Before Commands can be sent to firmware, 
		//if(_F2M_CHK_PIO3())
		//{																				  	// the current Bluetooth connection must be closed down. 		
		//LCD_RollingDisplay("Waiting for PIO3");
		while(_F2M_CHK_PIO3()!=0);								// Waiting for stopping Bluetooth connection if necessary			
		//}
		F2M_SetMspUartBR(F2M_USART_38400);					//HCM works only with Baudrate 38400!
		vTaskDelay(2);														//Delay 200ms for preparation entering the Command Mode
		F2M_Command(0x01,0x04,(unsigned char*)F2M_CMD_ENTHCM);			// Enter HCM Command
		F2M_GetResponse();																					// Get Response from the F2M Bluetooth Plug
		// ONLY FOR F2M03AC2!!!!! 
		_F2M_CLR_PIO2();																				  // 
		return F2M_RSP_BUFFER[2];										                // Return Status Byte 
																		  
}

unsigned char F2M_SetF2MBaudrate()
{
		// Default UART Setting 
		unsigned char BRstr[] = {0x04,		// Baudrate 19200
														 0x01,		// Hardware flow control on
														 0x00,		// No parity
														 0x08,		// 8bit
														 0x01};		// 1 stop bit
																																
		switch(F2M_USART_COMM)						// Translation F2M Baudrate Code
		{
			case F2M_USART_2400:
					BRstr[0] = 0x01;
							break;
			case F2M_USART_4800:
					BRstr[0] = 0x02;
							break;
			case F2M_USART_9600:
					BRstr[0] = 0x03;
							break;
			case F2M_USART_19200:
					BRstr[0] = 0x04;
							break;
			case F2M_USART_38400:
					BRstr[0] = 0x05;
							break;
			case F2M_USART_57600:
					BRstr[0] = 0x06;
							break;			
			case F2M_USART_115200:
					BRstr[0] = 0x07;
							break;
			default:
					BRstr[0] = 0x04;							
		}
		 
		F2M_Command(0x15,0x05,BRstr);								// Set F2M Communication Baudrate
		F2M_GetResponse();													// Get Response from the F2M Bluetooth Plug
		return F2M_RSP_BUFFER[2];										// Return Status Byte 										
}

unsigned char F2M_SetOperationMode(unsigned char Mode)
{		
		// Mode: 0x01 Bluetooth Master
		// Mode: 0x02 Bluetooth Slave
		if((Mode!=0x01) && (Mode!=0x02)) return 0;		// Error!
		F2M_Command(0x13,0x01,&Mode);								  // Set Operation Mode
		F2M_GetResponse();													  // Get Response from the F2M Bluetooth Plug
		return F2M_RSP_BUFFER[2]; 									  // Return Status Byte 															  
}

unsigned char F2M_Pairing()
{
		unsigned char PairingSetting[]={0x00,				 	// No Encryption
																		0x01,					// Authentication
																		0x00};				// no effect for master
		//unsigned char pStrBuffer[0x16];							// longest str: 0x16 bytes(address + passkey)
		//strcpy(pStrBuffer,F2M_PAIR._.ADDRESS);
		//strcat(pStrBuffer,F2M_PAIR._.PASSKEY);
		LCD_RollingDisplay("Try to pair off with");
		LCD_RollingDisplay(F2M_PAIR_NAME);
		strcpy(F2M_PAIR._.PASSKEY,"1111");						// Set passkey as "1111" (ASCII)
		
		F2M_Command(0x67,0x03,(unsigned char*)PairingSetting);			// Set Pairing Parameters
		F2M_GetResponse();																					// Get Response from the F2M Bluetooth Plug
		if(F2M_RSP_BUFFER[2]!= 0x01)
						return F2M_RSP_BUFFER[2];														// Error
		F2M_Command(0x64,0x06+strlen(F2M_PAIR._.PASSKEY),F2M_PAIR.ADD_PASSKEY);	// Pairing
		F2M_GetResponse();																											// Get Response from the F2M Bluetooth Plug
		if(F2M_RSP_BUFFER[2]!= 0x01)
						return F2M_RSP_BUFFER[2];																				// Error
		F2M_GetResponse();																											//Waiting for pairng
		return F2M_RSP_BUFFER[2];
}

unsigned char F2M_SelSlave(char* pDesName)
{
		//const unsigned char pDesName[] =  F2M_SLAVE_NAME;
		unsigned char i;
		char* pSname = (char*)F2M_RSP_BUFFER + 9;																// Get point to the slave name
		if(pDesName == NULL) return 0;																					// Null point , return error
		
		// just a compare
		while(*pDesName)
						if(*pDesName++ != *pSname++) return 0;	
						
		return 1;
		// end
		
		//LCD_RollingDisplay(pSname);
		//LCD_RollingDisplay(pDesName);				// for Debug
		/*
		if(!(BUFFER_FLAG & F2M_PAIRSEL_FLAG))																		// Still no suitable slave in response
		{
				while(*pDesName)
						if(*pDesName++ != *pSname++) return 0;					
					// Here the comparing is safe, if the pDesName's length  < pSname's
					// obviously no problem
					// if pDesName's length  > pSname's 
					// the parser will return at the last char of pSname '/0'
		}
		else
				return 0;																														// Slave has benn confirmed
				
					// if it is allowed to pick one of slaves, this parser should be modified 
					
		BUFFER_FLAG |= F2M_PAIRSEL_FLAG;																				// Set Pairsel flag, stop further comparing
		
		for(i=0;i<6;i++)																												// Get pairing Bluetooth address
				F2M_PAIR._.ADDRESS[i] = F2M_RSP_BUFFER[i+3];
		
		pDesName = (char*) F2M_PAIR_NAME;																				// Get pairing Bluetooth name
		pSname = (char*)F2M_RSP_BUFFER + 9;
		while(*pSname)
				*pDesName++ = *pSname++;
				
		*pDesName = 0x00;			//'/0'  !!!!																			// Add a null for end of string
		*/
		return 1;																																// Finish pairing
}

unsigned char F2M_Inquiry()
{
		unsigned char IQstr[] = {F2M_INQUIRY_SCAN_TIMEOUT,		// Inquiry scan timeout
														 F2M_INQUIRY_DEVICE_CLASS,		// Inquiry class of device
														 F2M_INQUIRY_NAME_REQUEST};		// Inquiry name request
		
		
		F2M_Command(0x60,0x06,IQstr);								// Set inquiry scan parameters
		F2M_GetResponse();													// Get Response from the F2M Bluetooth Plug
		while(F2M_RSP_BUFFER[1]!= 0x00)
		{
				if(F2M_RSP_BUFFER[2]== 0x01)						// Check Response Status 
								//LCD_RollingDisplay(pBName);   // Display
								F2M_SelSlave(F2M_SLAVE_NAME);		//Searching for aimed Slave
				else //if(F2M_RSP_BUFFER[2]!= 0xfc)
								return F2M_RSP_BUFFER[2];       // Error
				F2M_GetResponse();											// Get Response from the F2M Bluetooth Plug
		}
		if(BUFFER_FLAG & F2M_PAIRSEL_FLAG) 					// Suitable slave found
		{
				LCD_RollingDisplay("  Aim found! It's:");				// Just display
				LCD_RollingDisplay(F2M_PAIR_NAME);
		}
		else  LCD_RollingDisplay("  Aim not found!");
		return 1; 																	// Return Status Byte
}

unsigned char F2M_SetConnectRule(unsigned char *BluetoothAdr)
{
		if(BluetoothAdr == NULL) return 0;					// Null point, return error
		F2M_Command(0x17,0x06,BluetoothAdr);				// Exit HCM Command
		F2M_GetResponse();													// Get Response from the F2M Bluetooth Plug
		return F2M_RSP_BUFFER[2];										// Return Status Byte
}

unsigned char F2M_GetBluetoothName()
{
		F2M_Command(0x1c,0x00,NULL);				// Exit HCM Command
		F2M_GetResponse();													// Get Response from the F2M Bluetooth Plug
		return F2M_RSP_BUFFER[2];										// Return Status Byte
}

unsigned char F2M_SetBluetoothName(unsigned char *BluetoothName)
{
		if(BluetoothName == NULL) return 0;					// Null point, return error
		F2M_Command(0x1d,strlen((char*)BluetoothName)+1,BluetoothName);				// Exit HCM Command
		F2M_GetResponse();													// Get Response from the F2M Bluetooth Plug
		return F2M_RSP_BUFFER[2];										// Return Status Byte
}


unsigned char F2M_ExitCommandMode()
{		
		F2M_Command(0x50,0x00,0x00);								// Exit HCM Command