⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 hplance.c

📁 powerpc内核mpc8241linux系统下net驱动程序
💻 C
字号:
/* hplance.c  : the  Linux/hp300/lance ethernet driver * * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk> * Based on the Sun Lance driver and the NetBSD HP Lance driver * Uses the generic 7990.c LANCE code. */#include <linux/module.h>#include <linux/kernel.h>#include <linux/sched.h>#include <linux/types.h>#include <linux/interrupt.h>#include <linux/ptrace.h>#include <linux/ioport.h>#include <linux/malloc.h>#include <linux/string.h>#include <linux/delay.h>#include <linux/init.h>#include <linux/errno.h>#include <asm/system.h>#include <asm/io.h>#include <asm/pgtable.h>/* Used for the temporal inet entries and routing */#include <linux/socket.h>#include <linux/route.h>#include <linux/dio.h>#include <linux/netdevice.h>#include <linux/etherdevice.h>#include <linux/skbuff.h>#include "hplance.h"/* We have 16834 bytes of RAM for the init block and buffers. This places * an upper limit on the number of buffers we can use. NetBSD uses 8 Rx * buffers and 2 Tx buffers. */#define LANCE_LOG_TX_BUFFERS 1#define LANCE_LOG_RX_BUFFERS 3#include "7990.h"                                 /* use generic LANCE code *//* Our private data structure */struct hplance_private {  struct lance_private lance;  unsigned int scode;  void *base;};/* function prototypes... This is easy because all the grot is in the * generic LANCE support. All we have to support is probing for boards, * plus board-specific init, open and close actions.  * Oh, and we need to tell the generic code how to read and write LANCE registers... */int hplance_probe(struct device *dev);static int hplance_init(struct device *dev, int scode);static int hplance_open(struct device *dev);static int hplance_close(struct device *dev);static void hplance_writerap(struct hplance_private *lp, unsigned short value);static void hplance_writerdp(struct hplance_private *lp, unsigned short value);static unsigned short hplance_readrdp(struct hplance_private *lp);#ifdef MODULEstatic struct hplance_private *root_hplance_dev = NULL;#endif/* Find all the HP Lance boards and initialise them... */__initfunc(int hplance_probe(struct device *dev)){        int cards = 0, called = 0;        if (!MACH_IS_HP300 || called)                return(ENODEV);        called++;                /* Isn't DIO nice? */        for(;;)        {                int v, scode = dio_find(DIO_ID_LAN);                                                if (!scode)                        break;                                if(cards)                        dev = NULL;      /* don't trash previous device, make a new one */                cards++;                                v = hplance_init(dev, scode);                if (v)                            /* error, abort immediately */                        return v;        }        /* OK, return success, or ENODEV if we didn't find any cards */        if (!cards)                return ENODEV;        return 0;}/* Initialise a single lance board at the given select code */__initfunc (static int hplance_init(struct device *dev, int scode)){        /* const char *name = dio_scodetoname(scode); */        static const char name[] = "HP LANCE";        void *va = dio_scodetoviraddr(scode);        struct hplance_private *lp;        int i;                if (dev == NULL)                dev = init_etherdev(0, sizeof(struct hplance_private));        else        {                dev->priv = kmalloc(sizeof(struct hplance_private), GFP_KERNEL);                if (dev->priv == NULL)                        return -ENOMEM;                memset(dev->priv, 0, sizeof(struct hplance_private));        }        printk("%s: HP LANCE; select code %d, addr", dev->name, scode);        /* reset the board */        writeb(0xff,va+DIO_IDOFF);        udelay(100);                              /* ariba! ariba! udelay! udelay! */        /* Fill the dev fields */        dev->base_addr = (unsigned long)va;        dev->open = &hplance_open;        dev->stop = &hplance_close;        dev->hard_start_xmit = &lance_start_xmit;        dev->get_stats = &lance_get_stats;        dev->set_multicast_list = &lance_set_multicast;        dev->dma = 0;                for (i=0; i<6; i++)        {                /* The NVRAM holds our ethernet address, one nibble per byte,                 * at bytes NVRAMOFF+1,3,5,7,9...                 */                dev->dev_addr[i] = ((readb(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)                        | (readb(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);                printk("%c%2.2x", i == 0 ? ' ' : ':', dev->dev_addr[i]);        }                lp = (struct hplance_private *)dev->priv;        lp->lance.name = (char*)name;                   /* discards const, shut up gcc */        lp->lance.ll = (struct lance_regs *)(va + HPLANCE_REGOFF);        lp->lance.init_block = (struct lance_init_block *)(va + HPLANCE_MEMOFF); /* CPU addr */        lp->lance.lance_init_block = 0;                 /* LANCE addr of same RAM */        lp->lance.busmaster_regval = LE_C3_BSWP;        /* we're bigendian */        lp->lance.irq = dio_scodetoipl(scode);        lp->lance.writerap = hplance_writerap;        lp->lance.writerdp = hplance_writerdp;        lp->lance.readrdp = hplance_readrdp;        lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS;        lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;        lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;        lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;        lp->scode = scode;	lp->base = va;        ether_setup(dev);	printk(", irq %d\n", lp->lance.irq);#ifdef MODULE        dev->ifindex = dev_new_index();        lp->next_module = root_hplance_dev;        root_hplance_dev = lp;#endif /* MODULE */        dio_config_board(scode);                  /* tell bus scanning code this one's taken */        return 0;}/* This is disgusting. We have to check the DIO status register for ack every * time we read or write the LANCE registers. */static void hplance_writerap(struct hplance_private *lp, unsigned short value){        struct hplance_reg *hpregs = (struct hplance_reg *)lp->base;        do {                lp->lance.ll->rap = value;        } while ((hpregs->status & LE_ACK) == 0);}static void hplance_writerdp(struct hplance_private *lp, unsigned short value){        struct hplance_reg *hpregs = (struct hplance_reg *)lp->base;        do {                lp->lance.ll->rdp = value;        } while ((hpregs->status & LE_ACK) == 0);}static unsigned short hplance_readrdp(struct hplance_private *lp){        unsigned short val;        struct hplance_reg *hpregs = (struct hplance_reg *)lp->base;        do {                val = lp->lance.ll->rdp;        } while ((hpregs->status & LE_ACK) == 0);        return val;}static int hplance_open(struct device *dev){        int status;        struct hplance_private *lp = (struct hplance_private *)dev->priv;        struct hplance_reg *hpregs = (struct hplance_reg *)lp->base;                status = lance_open(dev);                 /* call generic lance open code */        if (status)                return status;        /* enable interrupts at board level. */        writeb(LE_IE, &(hpregs->status));        MOD_INC_USE_COUNT;        return 0;}static int hplance_close(struct device *dev){        struct hplance_private *lp = (struct hplance_private *)dev->priv;        struct hplance_reg *hpregs = (struct hplance_reg *)lp->base;        writeb(0,&(hpregs->status));              /* disable interrupts at boardlevel */        lance_close(dev);        MOD_DEC_USE_COUNT;        return 0;}#ifdef MODULEint init_module(void){        root_lance_dev = NULL;        return hplance_probe(NULL);}void cleanup_module(void){        /* Walk the chain of devices, unregistering them */        struct hplance_private *lp;        while (root_hplance_dev) {                lp = root_hplance_dev->next_module;                dio_unconfig_board(lp->scode);                unregister_netdev(root_lance_dev->dev);                kfree(root_lance_dev->dev);                root_lance_dev = lp;        }}#endif /* MODULE */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -