⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ni52.h

📁 powerpc内核mpc8241linux系统下net驱动程序
💻 H
字号:
/* * Intel i82586 Ethernet definitions * * This is an extension to the Linux operating system, and is covered by the * same Gnu Public License that covers that work. * * copyrights (c) 1994 by Michael Hipp (mhipp@student.uni-tuebingen.de) * * I have done a look in the following sources: *   crynwr-packet-driver by Russ Nelson *   Garret A. Wollman's i82586-driver for BSD */ #define NI52_RESET     0  /* writing to this address, resets the i82586 */#define NI52_ATTENTION 1  /* channel attention, kick the 586 */#define NI52_TENA      3  /* 2-5 possibly wrong, Xmit enable */#define NI52_TDIS      2  /* Xmit disable */#define NI52_INTENA    5  /* Interrupt enable */#define NI52_INTDIS    4  /* Interrupt disable */#define NI52_MAGIC1    6  /* dunno exact function */#define NI52_MAGIC2    7  /* dunno exact function */#define NI52_MAGICVAL1 0x00  /* magic-values for ni5210 card */#define NI52_MAGICVAL2 0x55/* * where to find the System Configuration Pointer (SCP) */#define SCP_DEFAULT_ADDRESS 0xfffff4/* * System Configuration Pointer Struct */struct scp_struct{  unsigned short zero_dum0;	/* has to be zero */  unsigned char  sysbus;	/* 0=16Bit,1=8Bit */  unsigned char  zero_dum1;	/* has to be zero for 586 */  unsigned short zero_dum2;  unsigned short zero_dum3;  char          *iscp;		/* pointer to the iscp-block */};/* * Intermediate System Configuration Pointer (ISCP) */struct iscp_struct{  unsigned char  busy;          /* 586 clears after successful init */  unsigned char  zero_dummy;    /* has to be zero */  unsigned short scb_offset;    /* pointeroffset to the scb_base */  char          *scb_base;      /* base-address of all 16-bit offsets */};/* * System Control Block (SCB) */struct scb_struct{  unsigned char rus;  unsigned char cus;  unsigned char cmd_ruc;           /* command word: RU part */  unsigned char cmd_cuc;           /* command word: CU part & ACK */  unsigned short cbl_offset;    /* pointeroffset, command block list */  unsigned short rfa_offset;    /* pointeroffset, receive frame area */  unsigned short crc_errs;      /* CRC-Error counter */  unsigned short aln_errs;      /* allignmenterror counter */  unsigned short rsc_errs;      /* Resourceerror counter */  unsigned short ovrn_errs;     /* OVerrunerror counter */};/* * possible command values for the command word */#define RUC_MASK	0x0070	/* mask for RU commands */#define RUC_NOP		0x0000	/* NOP-command */#define RUC_START	0x0010	/* start RU */#define RUC_RESUME	0x0020	/* resume RU after suspend */#define RUC_SUSPEND	0x0030	/* suspend RU */#define RUC_ABORT	0x0040	/* abort receiver operation immediately */#define CUC_MASK        0x07  /* mask for CU command */#define CUC_NOP         0x00  /* NOP-command */#define CUC_START       0x01  /* start execution of 1. cmd on the CBL */#define CUC_RESUME      0x02  /* resume after suspend */#define CUC_SUSPEND     0x03  /* Suspend CU */#define CUC_ABORT       0x04  /* abort command operation immediately */#define ACK_MASK        0xf0  /* mask for ACK command */#define ACK_CX          0x80  /* acknowledges STAT_CX */#define ACK_FR          0x40  /* ack. STAT_FR */#define ACK_CNA         0x20  /* ack. STAT_CNA */#define ACK_RNR         0x10  /* ack. STAT_RNR *//* * possible status values for the status word */#define STAT_MASK       0xf0  /* mask for cause of interrupt */#define STAT_CX         0x80  /* CU finished cmd with its I bit set */#define STAT_FR         0x40  /* RU finished receiving a frame */#define STAT_CNA        0x20  /* CU left active state */#define STAT_RNR        0x10  /* RU left ready state */#define CU_STATUS       0x7   /* CU status, 0=idle */#define CU_SUSPEND      0x1   /* CU is suspended */#define CU_ACTIVE       0x2   /* CU is active */#define RU_STATUS	0x70	/* RU status, 0=idle */#define RU_SUSPEND	0x10	/* RU suspended */#define RU_NOSPACE	0x20	/* RU no resources */#define RU_READY	0x40	/* RU is ready *//* * Receive Frame Descriptor (RFD) */struct rfd_struct{  unsigned char  stat_low;	/* status word */  unsigned char  stat_high;	/* status word */  unsigned char  rfd_sf;	/* 82596 mode only */  unsigned char  last;		/* Bit15,Last Frame on List / Bit14,suspend */  unsigned short next;		/* linkoffset to next RFD */  unsigned short rbd_offset;	/* pointeroffset to RBD-buffer */  unsigned char  dest[6];	/* ethernet-address, destination */  unsigned char  source[6];	/* ethernet-address, source */  unsigned short length;	/* 802.3 frame-length */  unsigned short zero_dummy;	/* dummy */};#define RFD_LAST     0x80	/* last: last rfd in the list */#define RFD_SUSP     0x40	/* last: suspend RU after  */#define RFD_COMPL    0x80#define RFD_OK       0x20#define RFD_BUSY     0x40#define RFD_ERR_LEN  0x10     /* Length error (if enabled length-checking */#define RFD_ERR_CRC  0x08     /* CRC error */#define RFD_ERR_ALGN 0x04     /* Alignment error */#define RFD_ERR_RNR  0x02     /* status: receiver out of resources */#define RFD_ERR_OVR  0x01     /* DMA Overrun! */#define RFD_ERR_FTS  0x0080	/* Frame to short */#define RFD_ERR_NEOP 0x0040	/* No EOP flag (for bitstuffing only) */#define RFD_ERR_TRUN 0x0020	/* (82596 only/SF mode) indicates truncated frame */#define RFD_MATCHADD 0x0002     /* status: Destinationaddress !matches IA (only 82596) */#define RFD_COLLDET  0x0001	/* Detected collision during reception *//* * Receive Buffer Descriptor (RBD) */struct rbd_struct {  unsigned short status;	/* status word,number of used bytes in buff */  unsigned short next;		/* pointeroffset to next RBD */  char          *buffer;	/* receive buffer address pointer */  unsigned short size;		/* size of this buffer */  unsigned short zero_dummy;    /* dummy */};#define RBD_LAST	0x8000	/* last buffer */#define RBD_USED	0x4000	/* this buffer has data */#define RBD_MASK	0x3fff	/* size-mask for length *//* * Statusvalues for Commands/RFD */#define STAT_COMPL   0x8000	/* status: frame/command is complete */#define STAT_BUSY    0x4000	/* status: frame/command is busy */#define STAT_OK      0x2000	/* status: frame/command is ok *//* * Action-Commands */#define CMD_NOP		0x0000	/* NOP */#define CMD_IASETUP	0x0001	/* initial address setup command */#define CMD_CONFIGURE	0x0002	/* configure command */#define CMD_MCSETUP	0x0003	/* MC setup command */#define CMD_XMIT	0x0004	/* transmit command */#define CMD_TDR		0x0005	/* time domain reflectometer (TDR) command */#define CMD_DUMP	0x0006	/* dump command */#define CMD_DIAGNOSE	0x0007	/* diagnose command *//* * Action command bits */#define CMD_LAST	0x8000	/* indicates last command in the CBL */#define CMD_SUSPEND	0x4000	/* suspend CU after this CB */#define CMD_INT		0x2000	/* generate interrupt after execution *//* * NOP - command */struct nop_cmd_struct{  unsigned short cmd_status;	/* status of this command */  unsigned short cmd_cmd;       /* the command itself (+bits) */  unsigned short cmd_link;      /* offsetpointer to next command */};/* * IA Setup command */struct iasetup_cmd_struct {  unsigned short cmd_status;  unsigned short cmd_cmd;  unsigned short cmd_link;  unsigned char  iaddr[6];};/* * Configure command  */struct configure_cmd_struct{  unsigned short cmd_status;  unsigned short cmd_cmd;  unsigned short cmd_link;  unsigned char  byte_cnt;   /* size of the config-cmd */  unsigned char  fifo;       /* fifo/recv monitor */  unsigned char  sav_bf;     /* save bad frames (bit7=1)*/  unsigned char  adr_len;    /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/  unsigned char  priority;   /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */  unsigned char  ifs;        /* inter frame spacing */  unsigned char  time_low;   /* slot time low */  unsigned char  time_high;  /* slot time high(0-2) and max. retries(4-7) */  unsigned char  promisc;    /* promisc-mode(0) , et al (1-7) */  unsigned char  carr_coll;  /* carrier(0-3)/collision(4-7) stuff */  unsigned char  fram_len;   /* minimal frame len */  unsigned char  dummy;	     /* dummy */};/* * Multicast Setup command  */struct mcsetup_cmd_struct {  unsigned short cmd_status;  unsigned short cmd_cmd;  unsigned short cmd_link;  unsigned short mc_cnt;		/* number of bytes in the MC-List */  unsigned char  mc_list[0][6];  	/* pointer to 6 bytes entries */};/* * DUMP command */struct dump_cmd_struct{  unsigned short cmd_status;  unsigned short cmd_cmd;  unsigned short cmd_link;  unsigned short dump_offset;    /* pointeroffset to DUMP space */};/* * transmit command  */struct transmit_cmd_struct {  unsigned short cmd_status;  unsigned short cmd_cmd;  unsigned short cmd_link;  unsigned short tbd_offset;	/* pointeroffset to TBD */  unsigned char  dest[6];       /* destination address of the frame */  unsigned short length;	/* user defined: 802.3 length / Ether type */};#define TCMD_ERRMASK     0x0fa0#define TCMD_MAXCOLLMASK 0x000f#define TCMD_MAXCOLL     0x0020#define TCMD_HEARTBEAT   0x0040#define TCMD_DEFERRED    0x0080#define TCMD_UNDERRUN    0x0100#define TCMD_LOSTCTS     0x0200#define TCMD_NOCARRIER   0x0400#define TCMD_LATECOLL    0x0800struct tdr_cmd_struct{  unsigned short cmd_status;  unsigned short cmd_cmd;  unsigned short cmd_link;  unsigned short status;};#define TDR_LNK_OK	0x8000	/* No link problem identified */#define TDR_XCVR_PRB	0x4000	/* indicates a transceiver problem */#define TDR_ET_OPN	0x2000	/* open, no correct termination */#define TDR_ET_SRT	0x1000	/* TDR detected a short circuit */#define TDR_TIMEMASK	0x07ff	/* mask for the time field *//* * Transmit Buffer Descriptor (TBD) */struct tbd_struct{  unsigned short size;		/* size + EOF-Flag(15) */  unsigned short next;          /* pointeroffset to next TBD */  char          *buffer;        /* pointer to buffer */};#define TBD_LAST 0x8000         /* EOF-Flag, indicates last buffer in list */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -