mace.c

powerpc内核mpc8241linux系统下net驱动程序

/*
 * Network device driver for the MACE ethernet controller on
 * Apple Powermacs.  Assumes it's under a DBDMA controller.
 *
 * Copyright (C) 1996 Paul Mackerras.
 */

#ifdef MODULE
#include <linux/module.h>
#include <linux/version.h>
#endif

#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <asm/prom.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include "mace.h"

#ifdef MODULE
static struct device *mace_devs = NULL;
#endif

#define N_RX_RING	8
#define N_TX_RING	6
#define MAX_TX_ACTIVE	1
#define NCMDS_TX	1	/* dma commands per element in tx ring */
#define RX_BUFLEN	(ETH_FRAME_LEN + 8)
#define TX_TIMEOUT	HZ	/* 1 second */

/* Bits in transmit DMA status */
#define TX_DMA_ERR	0x80

struct mace_data {
    volatile struct mace *mace;
    volatile struct dbdma_regs *tx_dma;
    int tx_dma_intr;
    volatile struct dbdma_regs *rx_dma;
    int rx_dma_intr;
    volatile struct dbdma_cmd *tx_cmds;	/* xmit dma command list */
    volatile struct dbdma_cmd *rx_cmds;	/* recv dma command list */
    struct sk_buff *rx_bufs[N_RX_RING];
    int rx_fill;
    int rx_empty;
    struct sk_buff *tx_bufs[N_TX_RING];
    int tx_fill;
    int tx_empty;
    unsigned char maccc;
    unsigned char tx_fullup;
    unsigned char tx_active;
    unsigned char tx_bad_runt;
    struct net_device_stats stats;
    struct timer_list tx_timeout;
    int timeout_active;
};

/*
 * Number of bytes of private data per MACE: allow enough for
 * the rx and tx dma commands plus a branch dma command each,
 * and another 16 bytes to allow us to align the dma command
 * buffers on a 16 byte boundary.
 */
#define PRIV_BYTES	(sizeof(struct mace_data) \
	+ (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))

static int bitrev(int);
static int mace_open(struct device *dev);
static int mace_close(struct device *dev);
static int mace_xmit_start(struct sk_buff *skb, struct device *dev);
static struct net_device_stats *mace_stats(struct device *dev);
static void mace_set_multicast(struct device *dev);
static void mace_reset(struct device *dev);
static int mace_set_address(struct device *dev, void *addr);
static void mace_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static void mace_txdma_intr(int irq, void *dev_id, struct pt_regs *regs);
static void mace_rxdma_intr(int irq, void *dev_id, struct pt_regs *regs);
static void mace_set_timeout(struct device *dev);
static void mace_tx_timeout(unsigned long data);
static inline void dbdma_reset(volatile struct dbdma_regs *dma);
static inline void mace_clean_rings(struct mace_data *mp);
static void __mace_set_address(struct device *dev, void *addr);

/*
 * If we can't get a skbuff when we need it, we use this area for DMA.
 */
static unsigned char dummy_buf[RX_BUFLEN+2];

/* Bit-reverse one byte of an ethernet hardware address. */
static inline int
bitrev(int b)
{
    int d = 0, i;

    for (i = 0; i < 8; ++i, b >>= 1)
	d = (d << 1) | (b & 1);
    return d;
}

int
mace_probe(struct device *dev)
{
	int j, rev;
	struct mace_data *mp;
	struct device_node *mace;
	unsigned char *addr;
	static int maces_found = 0;
	static struct device_node *next_mace;

	if (!maces_found) {
		next_mace = find_devices("mace");
		maces_found = 1;
	}
	mace = next_mace;
	if (mace == 0)
		return -ENODEV;
	next_mace = mace->next;

	if (mace->n_addrs != 3 || mace->n_intrs != 3) {
		printk(KERN_ERR "can't use MACE %s: expect 3 addrs and 3 intrs\n",
		       mace->full_name);
		return -ENODEV;
	}

	if (dev == NULL)
		dev = init_etherdev(0, PRIV_BYTES);
	else {
		dev->priv = kmalloc(PRIV_BYTES, GFP_KERNEL);
		if (dev->priv == 0)
			return -ENOMEM;
	}
	memset(dev->priv, 0, PRIV_BYTES);

	mp = (struct mace_data *) dev->priv;
	dev->base_addr = mace->addrs[0].address;
	mp->mace = (volatile struct mace *)
		ioremap(mace->addrs[0].address, 0x1000);
	dev->irq = mace->intrs[0].line;

	addr = get_property(mace, "mac-address", NULL);
	if (addr == NULL) {
		addr = get_property(mace, "local-mac-address", NULL);
		if (addr == NULL) {
			printk(KERN_ERR "Can't get mac-address for MACE at %lx\n",
			       dev->base_addr);
			return -EAGAIN;
		}
	}

	printk(KERN_INFO "%s: MACE at", dev->name);
	rev = addr[0] == 0 && addr[1] == 0xA0;
	for (j = 0; j < 6; ++j) {
		dev->dev_addr[j] = rev? bitrev(addr[j]): addr[j];
		printk("%c%.2x", (j? ':': ' '), dev->dev_addr[j]);
	}
	printk(", chip revision %d.%d\n",
		in_8(&mp->mace->chipid_hi), in_8(&mp->mace->chipid_lo));

	mp = (struct mace_data *) dev->priv;
	mp->maccc = ENXMT | ENRCV;
	mp->tx_dma = (volatile struct dbdma_regs *)
		ioremap(mace->addrs[1].address, 0x1000);
	mp->tx_dma_intr = mace->intrs[1].line;
	mp->rx_dma = (volatile struct dbdma_regs *)
		ioremap(mace->addrs[2].address, 0x1000);
	mp->rx_dma_intr = mace->intrs[2].line;

	mp->tx_cmds = (volatile struct dbdma_cmd *) DBDMA_ALIGN(mp + 1);
	mp->rx_cmds = mp->tx_cmds + NCMDS_TX * N_TX_RING + 1;

	memset(&mp->stats, 0, sizeof(mp->stats));
	memset((char *) mp->tx_cmds, 0,
	       (NCMDS_TX*N_TX_RING + N_RX_RING + 2) * sizeof(struct dbdma_cmd));
	init_timer(&mp->tx_timeout);
	mp->timeout_active = 0;

	dev->open = mace_open;
	dev->stop = mace_close;
	dev->hard_start_xmit = mace_xmit_start;
	dev->get_stats = mace_stats;
	dev->set_multicast_list = mace_set_multicast;
	dev->set_mac_address = mace_set_address;

	ether_setup(dev);

	mace_reset(dev);

	if (request_irq(dev->irq, mace_interrupt, 0, "MACE", dev)) {
		printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq);
		return -EAGAIN;
	}
	if (request_irq(mace->intrs[1].line, mace_txdma_intr, 0, "MACE-txdma",
			dev)) {
		printk(KERN_ERR "MACE: can't get irq %d\n", mace->intrs[1].line);
		return -EAGAIN;
	}
	if (request_irq(mace->intrs[2].line, mace_rxdma_intr, 0, "MACE-rxdma",
			dev)) {
		printk(KERN_ERR "MACE: can't get irq %d\n", mace->intrs[2].line);
		return -EAGAIN;
	}

	return 0;
}

static void dbdma_reset(volatile struct dbdma_regs *dma)
{
    int i;

    out_le32(&dma->control, (WAKE|FLUSH|PAUSE|RUN) << 16);

    /*
     * Yes this looks peculiar, but apparently it needs to be this
     * way on some machines.
     */
    for (i = 200; i > 0; --i)
	if (ld_le32(&dma->control) & RUN)
	    udelay(1);
}

static void mace_reset(struct device *dev)
{
    struct mace_data *mp = (struct mace_data *) dev->priv;
    volatile struct mace *mb = mp->mace;
    int i;

    /* soft-reset the chip */
    i = 200;
    while (--i) {
	out_8(&mb->biucc, SWRST);
	if (in_8(&mb->biucc) & SWRST) {
	    udelay(10);
	    continue;
	}
	break;
    }
    if (!i) {
	printk(KERN_ERR "mace: cannot reset chip!\n");
	return;
    }

    out_8(&mb->imr, 0xff);	/* disable all intrs for now */
    i = in_8(&mb->ir);
    out_8(&mb->maccc, 0);	/* turn off tx, rx */

    out_8(&mb->biucc, XMTSP_64);
    out_8(&mb->utr, RTRD);
    out_8(&mb->fifocc, RCVFW_32 | XMTFW_16 | XMTFWU | RCVFWU | XMTBRST);
    out_8(&mb->xmtfc, AUTO_PAD_XMIT); /* auto-pad short frames */
    out_8(&mb->rcvfc, 0);

    /* load up the hardware address */
    __mace_set_address(dev, dev->dev_addr);

    /* clear the multicast filter */
    out_8(&mb->iac, ADDRCHG | LOGADDR);
    while ((in_8(&mb->iac) & ADDRCHG) != 0)
	;
    for (i = 0; i < 8; ++i) {
	out_8(&mb->ladrf, 0);
    }
    /* done changing address */
    out_8(&mb->iac, 0);

    out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO);
}

static void __mace_set_address(struct device *dev, void *addr)
{
    volatile struct mace *mb = ((struct mace_data *) dev->priv)->mace;
    unsigned char *p = addr;
    int i;

    /* load up the hardware address */
    out_8(&mb->iac, ADDRCHG | PHYADDR);
    while ((in_8(&mb->iac) & ADDRCHG) != 0)
	;
    for (i = 0; i < 6; ++i)
	out_8(&mb->padr, dev->dev_addr[i] = p[i]);
}

static int mace_set_address(struct device *dev, void *addr)
{
    struct mace_data *mp = (struct mace_data *) dev->priv;
    volatile struct mace *mb = mp->mace;
    unsigned long flags;

    save_flags(flags); cli();

    __mace_set_address(dev, addr);

    out_8(&mb->iac, 0);
    /* note: setting ADDRCHG clears ENRCV */
    out_8(&mb->maccc, mp->maccc);

    restore_flags(flags);
    return 0;
}

static int mace_open(struct device *dev)
{
    struct mace_data *mp = (struct mace_data *) dev->priv;
    volatile struct mace *mb = mp->mace;
    volatile struct dbdma_regs *rd = mp->rx_dma;
    volatile struct dbdma_regs *td = mp->tx_dma;
    volatile struct dbdma_cmd *cp;
    int i;
    struct sk_buff *skb;
    unsigned char *data;

    /* reset the chip */
    mace_reset(dev);

    /* initialize list of sk_buffs for receiving and set up recv dma */
    mace_clean_rings(mp);
    memset((char *)mp->rx_cmds, 0, N_RX_RING * sizeof(struct dbdma_cmd));
    cp = mp->rx_cmds;
    for (i = 0; i < N_RX_RING - 1; ++i) {
	skb = dev_alloc_skb(RX_BUFLEN + 2);
	if (skb == 0) {
	    data = dummy_buf;
	} else {
	    skb_reserve(skb, 2);	/* so IP header lands on 4-byte bdry */
	    data = skb->data;
	}
	mp->rx_bufs[i] = skb;
	st_le16(&cp->req_count, RX_BUFLEN);
	st_le16(&cp->command, INPUT_LAST + INTR_ALWAYS);
	st_le32(&cp->phy_addr, virt_to_bus(data));
	cp->xfer_status = 0;
	++cp;
    }
    mp->rx_bufs[i] = 0;
    st_le16(&cp->command, DBDMA_STOP);
    mp->rx_fill = i;
    mp->rx_empty = 0;

    /* Put a branch back to the beginning of the receive command list */
    ++cp;
    st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
    st_le32(&cp->cmd_dep, virt_to_bus(mp->rx_cmds));

    /* start rx dma */
    out_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
    out_le32(&rd->cmdptr, virt_to_bus(mp->rx_cmds));
    out_le32(&rd->control, (RUN << 16) | RUN);

    /* put a branch at the end of the tx command list */
    cp = mp->tx_cmds + NCMDS_TX * N_TX_RING;
    st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS);
    st_le32(&cp->cmd_dep, virt_to_bus(mp->tx_cmds));

    /* reset tx dma */
    out_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
    out_le32(&td->cmdptr, virt_to_bus(mp->tx_cmds));
    mp->tx_fill = 0;
    mp->tx_empty = 0;
    mp->tx_fullup = 0;
    mp->tx_active = 0;
    mp->tx_bad_runt = 0;

    /* turn it on! */
    out_8(&mb->maccc, mp->maccc);
    /* enable all interrupts except receive interrupts */
    out_8(&mb->imr, RCVINT);

#ifdef MOD_INC_USE_COUNT
    MOD_INC_USE_COUNT;
#endif
    return 0;
}

static inline void mace_clean_rings(struct mace_data *mp)
{
    int i;

    /* free some skb's */
    for (i = 0; i < N_RX_RING; ++i) {
	if (mp->rx_bufs[i] != 0) {
	    dev_kfree_skb(mp->rx_bufs[i]);
	    mp->rx_bufs[i] = 0;
	}
    }
    for (i = mp->tx_empty; i != mp->tx_fill; ) {
	dev_kfree_skb(mp->tx_bufs[i]);
	if (++i >= N_TX_RING)
	    i = 0;
    }
}

static int mace_close(struct device *dev)
{
    struct mace_data *mp = (struct mace_data *) dev->priv;
    volatile struct mace *mb = mp->mace;
    volatile struct dbdma_regs *rd = mp->rx_dma;
    volatile struct dbdma_regs *td = mp->tx_dma;

    /* disable rx and tx */
    out_8(&mb->maccc, 0);
    out_8(&mb->imr, 0xff);		/* disable all intrs */

    /* disable rx and tx dma */
    st_le32(&rd->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */
    st_le32(&td->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* clear run bit */

    mace_clean_rings(mp);

#ifdef MOD_DEC_USE_COUNT
    MOD_DEC_USE_COUNT;
#endif

    return 0;
}

static inline void mace_set_timeout(struct device *dev)
{
    struct mace_data *mp = (struct mace_data *) dev->priv;
    unsigned long flags;

    save_flags(flags);
    cli();
    if (mp->timeout_active)
	del_timer(&mp->tx_timeout);
    mp->tx_timeout.expires = jiffies + TX_TIMEOUT;
    mp->tx_timeout.function = mace_tx_timeout;
    mp->tx_timeout.data = (unsigned long) dev;
    add_timer(&mp->tx_timeout);
    mp->timeout_active = 1;
    restore_flags(flags);
}

static int mace_xmit_start(struct sk_buff *skb, struct device *dev)
{
    struct mace_data *mp = (struct mace_data *) dev->priv;
    volatile struct dbdma_regs *td = mp->tx_dma;
    volatile struct dbdma_cmd *cp, *np;
    unsigned long flags;
    int fill, next, len;

    /* see if there's a free slot in the tx ring */
    save_flags(flags); cli();
    fill = mp->tx_fill;
    next = fill + 1;
    if (next >= N_TX_RING)
	next = 0;
    if (next == mp->tx_empty) {
	dev->tbusy = 1;
	mp->tx_fullup = 1;
	restore_flags(flags);
	return 1;		/* can't take it at the moment */
    }
    restore_flags(flags);

    /* partially fill in the dma command block */
    len = skb->len;
    if (len > ETH_FRAME_LEN) {
	printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len);
	len = ETH_FRAME_LEN;
    }
    mp->tx_bufs[fill] = skb;
    cp = mp->tx_cmds + NCMDS_TX * fill;
    st_le16(&cp->req_count, len);