configure.c

无线射频收发芯片cc1020的校准程序代码

  EEPROMButton2Char=getchar();

  writeln("");

  Button1Char=EEPROMButton1Char;
  Button2Char=EEPROMButton2Char;
}


// Lets the user select specific TX mode
void SetTXmode(char PA_POWER)
{
  volatile char input_valid, input_char;
  volatile int i;

  writeln("Select TX mode:\n\r");
  writeln("1 - TX no modulation");
  writeln("2 - TX with modulation (PN9)");
  writestr("Enter choice : ");

  input_valid = FALSE;

  while(input_valid == FALSE)
  {
    input_char = getchar();
    switch( input_char ){
      // TX with no modulation
      case '1':
        SetupCC1020TX(TXANALOG, PA_POWER);
        WriteToCC1020Register(CC1020_MODEM,ReadFromCC1020Register(CC1020_MODEM)&~0x04);
        OPTION=0x80;        // INT on falling edge
        TRISC&=~(0x02);     // Set DIO as output
        input_valid = TRUE;
        break;

      // TX with PN9 modulation
      case '2':
        SetupCC1020TX(TXANALOG, PA_POWER);
        WriteToCC1020Register(CC1020_MODEM,ReadFromCC1020Register(CC1020_MODEM)|0x04);
        OPTION=0x80;        // INT on falling edge
        TRISC&=~(0x02);     // Set DIO as output
        DIO=1;
        for(i=0x0010; i > 0; i--);   //ca.150 usec
        DIO=0;
        for(i=0x0010; i > 0; i--);   //ca.150 usec
        DIO=1;
        for(i=0x0010; i > 0; i--);   //ca.150 usec
        DIO=0;
        input_valid = TRUE;
        break;

      // Invalid user input
      default:
        writeln("\n\rInvalid choice!\n\r");
        writeln("1 - TX no modulation");
        writeln("2 - TX with modulation (PN9)");
        writestr("Enter choice : ");
        input_valid = FALSE;
        break;
    }
  }

  if((ReadFromCC1020Register(CC1020_MODEM)&0x04) == 0x04){
    writeln("\n\rTX with modulation (PN9)");
  }else{
    writeln("\n\rTX no modulation");
  }
}


// Lets the user set PA power
void SetPApower(void)
{
  volatile char input_valid, input_char, freq_band;
  volatile int i;

  writeln("Select PA power:\n\r");

  // Display menu according to frequency band:
  if((ReadFromCC1020Register(CC1020_ANALOG)&0x80)==0x80){
    // 804-940 MHz band
    writeln("1 -  -20 dBm");
    writeln("2 -  -10 dBm");
    writeln("3 -    0 dBm");
    writeln("4 -   +5 dBm");
    writeln("5 -      MAX");
    freq_band = 1;
  }else{
    // 402-470 MHz band
    writeln("1 -  -20 dBm");
    writeln("2 -  -10 dBm");
    writeln("3 -    0 dBm");
    writeln("4 -  +10 dBm");
    writeln("5 -      MAX");
    freq_band = 0;
  }
  writestr("Enter choice : ");

  input_valid = FALSE;

  while(input_valid == FALSE)
  {
    input_char = getchar();
    switch( input_char ){
      // PA power = -20 dBm
      case '1':
        if(freq_band == 1){
          WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0x03);
        }else{
          WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0x01);
        }
        input_valid = TRUE;
        break;

      // PA power = -10 dBm
      case '2':
        if(freq_band == 1){
          WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0x0A);
        }else{
          WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0x04);
        }
        input_valid = TRUE;
        break;

      // PA power = 0 dBm
      case '3':
        if(freq_band == 1){
          WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0xA0);
        }else{
          WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0x0E);
        }
        input_valid = TRUE;
        break;

      // PA power = +5/+10 dBm
      case '4':
        WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0xFF);
        input_valid = TRUE;
        break;

      // PA power = MAX dBm
      case '5':
        WriteToCC1020Register(CC1020_PA_POWER, EEPROMPA_POWER=0xFF);
        input_valid = TRUE;
        break;

      // Invalid user input
      default:
        writeln("\n\rInvalid choice!\n\r");
        // Display menu according to frequency band:
        if(freq_band == 1){
          // 804-940 MHz band
          writeln("1 -  -20 dBm");
          writeln("2 -  -10 dBm");
          writeln("3 -    0 dBm");
          writeln("4 -   +5 dBm");
          writeln("5 -      MAX");
        }else{
          // 402-470 MHz band
          writeln("1 -  -20 dBm");
          writeln("2 -  -10 dBm");
          writeln("3 -    0 dBm");
          writeln("4 -  +10 dBm");
          writeln("5 -      MAX");
        }
        writestr("Enter choice : ");
        input_valid = FALSE;
        break;
    }
  }

  // Display actual PA power according to frequency band:
  if(freq_band == 1){
    // 804-940 MHz band:
    if(ReadFromCC1020Register(CC1020_PA_POWER) == 0x03){
      writeln("\n\rPA power = -20 dBm");
    }else if(ReadFromCC1020Register(CC1020_PA_POWER) == 0x0A){
      writeln("\n\rPA power = -10 dBm");
    }else if(ReadFromCC1020Register(CC1020_PA_POWER) == 0xA0){
      writeln("\n\rPA power =  0 dBm");
    }else if(ReadFromCC1020Register(CC1020_PA_POWER) >= 0xF0){
      writeln("\n\rPA power = +5 dBm");
    }else{
      // Do nothing...
    }
  }else{
    // 402-470 MHz band:
    if(ReadFromCC1020Register(CC1020_PA_POWER) == 0x01){
      writeln("\n\rPA power = -20 dBm");
    }else if(ReadFromCC1020Register(CC1020_PA_POWER) == 0x04){
      writeln("\n\rPA power = -10 dBm");
    }else if(ReadFromCC1020Register(CC1020_PA_POWER) == 0x0E){
      writeln("\n\rPA power =  0 dBm");
    }else if(ReadFromCC1020Register(CC1020_PA_POWER) >= 0xF0){
      writeln("\n\rPA power = +10 dBm");
    }else{
      // Do nothing...
    }
  }
}


// Lets the user set number of preamble
void SetPreambleLength(void){
  char input_str[4], i;

  writestr("Select preamble length (MAX = 10 bytes): ");

  // Empty input string
  for(i = 0; i < 4; i++){
    input_str[i] = 0;
  }

  for(i = 0; (i < 3) && ((input_str[i] = getchar()) != '\r'); i++){
    putchar(input_str[i]);
  }

  EEPROMPreambleLength = MAX(1, MIN(atoi(input_str), 10));

  writestr("\n\rPreamble length = ");
  writeint(EEPROMPreambleLength);
  writestr(" bytes\n\r");
}


// Lets the user access any CC1020 register, for read or write operation
void AccessCC1020Register(void){
  char i;
  char input_str[3];
  char reg_addr;
  char reg_value;
  char reg_action;

  // Access CC1020 register according to user input:
  while(TRUE){
    // Empty input string
    for(i = 0; i < 3; i++){
      input_str[i]=0;
    }
    writestr("\n\rRegister address: ");
    for(i = 0; (i < 2); i++){
      if((input_str[i] = getchar()) == '\r'){
        input_str[i] = 0;
        break;
      }else{
      }
      putchar(input_str[i]);
    }
    reg_addr = ((hexdigit2int(input_str[0]) << 4) & 0xF0) | (hexdigit2int(input_str[1]) & 0x0F);

    if(((reg_addr >= 0x00) && (reg_addr <= 0x27)) || ((reg_addr >= 0x40) && (reg_addr <= 0x4B))){
      // Empty input string
      for(i = 0; i < 3; i++){
        input_str[i]=0;
      }
      writestr("\n\rRegister action (w/r): ");
      reg_action = getchar();
      putchar(reg_action);
      reg_action = toupper(reg_action);

      if(reg_action == 'W'){
        writestr("\n\rRegister value: ");
        for(i = 0; (i < 2); i++){
          if((input_str[i] = getchar()) == '\r'){
            input_str[i] = 0;
            break;
          }else{
          }
          putchar(input_str[i]);
        }
        reg_value = ((hexdigit2int(input_str[0]) << 4) & 0xF0) | (hexdigit2int(input_str[1]) & 0x0F);
        if((reg_addr > 0x00) && (reg_addr <= 0x20)){
          EEPROMCC1020Config[reg_addr-1] = reg_value;
          if(reg_addr == CC1020_PA_POWER){
            EEPROMPA_POWER = reg_value;
          }else{
          }
        }else{
        }
        WriteToCC1020Register(reg_addr, reg_value);
        break;
      }else if(reg_action == 'R'){
        break;
      }else{
        writestr("\n\rInvalid register action (valid: r/w) !");
      }
    }else{
      writestr("\n\rInvalid register address (valid: 00-20) !");
    }
  }

  writestr("\n\rRegister status = ");
  writehex(ReadFromCC1020Register(reg_addr));
  writeln("");
}



// Displays the configuration menu
void DisplayConfigMenu(void)
{
  writeln("RF Modem Configuration Menu\n\r");
  writeln("D - Dump CC1020 registers");
  writeln("F - Default settings");
  writeln("C - Calibrate");
  writeln("R - RX mode");
  writeln("T - TX mode");
  writeln("L - PLL lock");
  writeln("M - Manchester format");
  writeln("N - NRZ format");
  writeln("P - Set PA Power");
  writeln("I - Set Preamble length");
  writeln("J - Access CC1020 register");
  writeln("B - Button configuration");
  writeln("X - Exit from configuration menu");
}

// Handles keystrokes for the configuration menu
void HandleConfigMenu(char inputvalue)
{
  switch(toupper(inputvalue)) {
    case 'D' : 
      DumpCC1020Regs();
      break;

    case 'X' :
      break;

    case 'F' :
      DefaultSettings();
      break;

    case 'C' :
      if (CalibrateCC1020(PA_POWER))
        writeln("Calibrate OK");
      else
        writeln("Calibrate failed");
      break;

    case 'R' :
      SetupCC1020RX(RXANALOG, PA_POWER);
      OPTION=0xC0;        // INT on rising edge
      TRISC|=0x02;        // Set DIO as input
      SET_TXLED(FALSE);
      SET_RXLED(TRUE);
      break;

    case 'T' :
      SetTXmode(PA_POWER);
      SET_TXLED(TRUE);
      SET_RXLED(FALSE);
      break;

    case 'L' :
      if ((ReadFromCC1020Register(CC1020_STATUS)&0x10)==0x10)
        writeln("PLL in lock");
      else
        writeln("PLL out of lock");
      break;

    case 'M' :
      WriteToCC1020Register(CC1020_MODEM, (ReadFromCC1020Register(CC1020_MODEM)&~0x03) | 0x01);
      EEPROMCC1020Config[CC1020_MODEM-1] |= 0x01;
      if((ReadFromCC1020Register(CC1020_MODEM)&0x03)==0x01){
        writeln("Manchester format");
      }else{
        writeln("NRZ format");
      }
      break;

    case 'N' :
      WriteToCC1020Register(CC1020_MODEM, ReadFromCC1020Register(CC1020_MODEM)&~0x03);
      EEPROMCC1020Config[CC1020_MODEM-1] &= ~0x03;
      if((ReadFromCC1020Register(CC1020_MODEM)&0x03)==0x01){
        writeln("Manchester format");
      }else{
        writeln("NRZ format");
      }
      break;

    case 'P' :
      SetPApower();
      break;

    case 'I' :
      SetPreambleLength();
      break;

    case 'J' :
      AccessCC1020Register();
      break;

    case 'B' :
      ButtonConfig();
      break;

    default:
      DisplayConfigMenu();
      break;
  }
}


// Runs the configuration menu
void ConfigurationMode(void)
{
  int i;

  DisplayConfigMenu();

  while(1){
    writestr(">");
    i=getchar();
    writeln("");
    HandleConfigMenu(i);
    if(toupper(i)=='X'){
      SetupCC1020All();
      return;
    }
  }
}