1305_8080p_lpc2148.opt

我写的使用LPC2148模拟8080并口驱动OLED屏的程序

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (LPC2148_OLED), 0x0004 // Tools: 'ARM-ADS'
GRPOPT 1,(Startup Code),1,0,0
GRPOPT 2,(Source Codes),1,0,0

OPTFFF 1,1,2,0,0,0,0,0,<.\SRC\Startup.s><Startup.s> 
OPTFFF 2,2,1,0,0,94,105,0,<.\SRC\UART_MODULE.C><UART_MODULE.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,110,0,0,0,110,0,0,0,166,3,0,0,74,2,0,0 }
OPTFFF 2,3,1,1,0,20,20,0,<.\SRC\1305_OLED.C><1305_OLED.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,132,0,0,0,132,0,0,0,192,3,0,0,100,2,0,0 }
OPTFFF 2,4,1,1,0,37,46,0,<.\SRC\8080_parallel_base.C><8080_parallel_base.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,154,0,0,0,154,0,0,0,214,3,0,0,122,2,0,0 }
OPTFFF 2,5,1,1,0,0,0,0,<.\SRC\board_init.c><board_init.c> 
OPTFFF 2,6,1,0,0,0,0,0,<.\SRC\delay.C><delay.C> 
OPTFFF 2,7,1,234881026,0,47,69,0,<.\SRC\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,88,0,0,0,88,0,0,0,144,3,0,0,52,2,0,0 }

ExtF <D:\OLED_Module\04_程序\1305_8080P_LPC2148\INC\config.H> 1,27,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,176,0,0,0,176,0,0,0,236,3,0,0,144,2,0,0 }
ExtF <D:\OLED_Module\04_程序\1305_8080P_LPC2148\INC\8080_parallel_base.H> 1,10,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,22,0,0,0,22,0,0,0,148,3,0,0,88,1,0,0 }
ExtF <D:\OLED_Module\04_程序\1305_8080P_LPC2148\INC\1305_OLED.H> 1,6,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,44,0,0,0,44,0,0,0,170,3,0,0,110,1,0,0 }
ExtF <D:\OLED_Module\04_程序\1305_8080P_LPC2148\INC\delay.h> 1,4,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,154,0,0,0,154,0,0,0,214,3,0,0,108,2,0,0 }
ExtF <D:\OLED_Module\04_程序\1305_8080P_LPC2148\INC\picture.h> 109,109,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,176,0,0,0,176,0,0,0,236,3,0,0,130,2,0,0 }

TARGOPT 1, (LPC2148_OLED)
 ADSCLK=12000000
  OPTTT 1,1,1,0
  OPTHX 1,65535,0,0,0
  OPTLX 79,66,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTAX 8
  OPTBL 0,(Data Sheet)<DATASHTS\PHILIPS\LPC2141_42_44_46_48.PDF>
  OPTBL 1,(User Manual)<DATASHTS\PHILIPS\user_manual_LPC214x.pdf>
  OPTDL (SARM.DLL)(-cLPC2100)(DARMP.DLL)(-pLPC2148)(SARM.DLL)()(TARMP.DLL)(-pLPC2148)
  OPTDBG 48125,-1,()()()()()()()()()() ()()()()
  OPTKEY 0,(DLGDARM)((134=-1,-1,-1,-1,0)(135=-1,-1,-1,-1,0)(153=-1,-1,-1,-1,0)(154=-1,-1,-1,-1,0)(108=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(105=-1,-1,-1,-1,0)(145=-1,-1,-1,-1,0)(147=128,157,320,267,0)(80=-1,-1,-1,-1,0)(104=965,403,1271,808,1)(100=645,394,1218,562,1)(101=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(113=-1,-1,-1,-1,0)(112=-1,-1,-1,-1,0)(137=-1,-1,-1,-1,0)(138=-1,-1,-1,-1,0)(117=-1,-1,-1,-1,0)(146=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(114=-1,-1,-1,-1,0)(141=-1,-1,-1,-1,0)(142=-1,-1,-1,-1,0)(143=-1,-1,-1,-1,0)(144=-1,-1,-1,-1,0)(115=-1,-1,-1,-1,0)(116=-1,-1,-1,-1,0))
  OPTKEY 0,(ARMDBGFLAGS)(-T5F)
  OPTWA 0,1,(IO0DIR)
  OPTWA 1,1,(command_byte)
  OPTDF 0x82
  OPTLE <>
  OPTLC <>
EndOpt