bootconfig.c

vxworks MPC8541 BSP

    iosInit (NUM_DRIVERS, NUM_FILES, "/null");
    consoleFd = NONE;

    /* install driver for on-board serial ports and make devices */

#ifdef  INCLUDE_TYCODRV_5_2
#ifdef  INCLUDE_TTY_DEV
    if (NUM_TTY > 0)
        {
        tyCoDrv ();                             /* install console driver */

        for (ix = 0; ix < NUM_TTY; ix++)        /* create serial devices */
            {
            sprintf (tyName, "%s%d", "/tyCo/", ix);

            (void) tyCoDevCreate (tyName, ix, 512, 512);

            if (ix == CONSOLE_TTY)
                strcpy (consoleName, tyName);   /* store console name */
            }

        consoleFd = open (consoleName, O_RDWR, 0);

        /* set baud rate */

        (void) ioctl (consoleFd, FIOBAUDRATE, CONSOLE_BAUD_RATE);
        (void) ioctl (consoleFd, FIOSETOPTIONS,
			OPT_ECHO | OPT_CRMOD | OPT_TANDEM | OPT_7_BIT);
        }
#endif  /* INCLUDE_TTY_DEV */

#else   /* !INCLUDE_TYCODRV_5_2 */
#ifdef  INCLUDE_TTY_DEV
    if (NUM_TTY > 0)
        {
        ttyDrv();                               /* install console driver */

        for (ix = 0; ix < NUM_TTY; ix++)        /* create serial devices */
            {
#if (defined(INCLUDE_WDB) && (WDB_COMM_TYPE == WDB_COMM_SERIAL))
	    if (ix == WDB_TTY_CHANNEL)          /* don't use WDBs channel */
	    	continue;
#endif
            sprintf (tyName, "%s%d", "/tyCo/", ix);
            (void) ttyDevCreate (tyName, sysSerialChanGet(ix), 512, 512);

            if (ix == CONSOLE_TTY)              /* init the tty console */
                {
                strcpy (consoleName, tyName);
                consoleFd = open (consoleName, O_RDWR, 0);
                (void) ioctl (consoleFd, FIOBAUDRATE, CONSOLE_BAUD_RATE);
                (void) ioctl (consoleFd, FIOSETOPTIONS,
			OPT_ECHO | OPT_CRMOD | OPT_TANDEM | OPT_7_BIT);
                }
            }
        }
#endif  /* INCLUDE_TTY_DEV */


#ifdef INCLUDE_PC_CONSOLE
    pcConDrv ();
    for (ix = 0; ix < N_VIRTUAL_CONSOLES; ix++)
        {
        sprintf (tyName, "%s%d", "/pcConsole/", ix);
        (void) pcConDevCreate (tyName,ix, 512, 512);
        if (ix == PC_CONSOLE)           /* init the console device */
            {
            strcpy (consoleName, tyName);
            consoleFd = open (consoleName, O_RDWR, 0);
            (void) ioctl (consoleFd, FIOBAUDRATE, CONSOLE_BAUD_RATE);
            (void) ioctl (consoleFd, FIOSETOPTIONS,
			OPT_ECHO | OPT_CRMOD | OPT_TANDEM | OPT_7_BIT);
            }
        }
#endif  /* INCLUDE_PC_CONSOLE */

#endif  /* !INCLUDE_TYCODRV_5_2 */

#ifdef INCLUDE_WDB
    wdbConfig();		/* configure and initialize the WDB agent */
    vxBootFile[0] = NULL;	/* clear boot line set by wdbConfig() */

#if defined(INCLUDE_TSFS_BOOT) && defined(INCLUDE_TSFS_BOOT_VIO_CONSOLE)
    consoleFd = open ("/vio/0", O_RDWR, 0);	/* for Target Server Console */
#endif
#endif	/* INCLUDE_WDB */

    ioGlobalStdSet (STD_IN,  consoleFd);
    ioGlobalStdSet (STD_OUT, consoleFd);
    ioGlobalStdSet (STD_ERR, consoleFd);

    pipeDrv ();					/* install pipe driver */

#if     defined(INCLUDE_EXC_HANDLING) && defined(INCLUDE_EXC_TASK)
#ifdef  INCLUDE_EXC_SHOW
    excShowInit ();			/* init exception show routines */
#endif
    excInit ();				/* initialize exception handling */
#endif  /* defined(INCLUDE_EXC_HANDLING) && defined(INCLUDE_EXC_TASK) */

    excHookAdd ((FUNCPTR) bootExcHandler);	/* install exc handler */
    logInit (consoleFd, 5);			/* initialize logging */

#ifdef	INCLUDE_DOSFS
    hashLibInit ();				/* hashLib used by dosFS */
#endif

    /* initialize object module loader */

#if	defined(INCLUDE_AOUT)
    bootAoutInit ();				/* use a.out format */
#else	/* coff or ecoff */
#if	defined(INCLUDE_ECOFF)
    bootEcoffInit ();				/* use ecoff format */
#else	/* coff */
#if	defined(INCLUDE_COFF)
    bootCoffInit ();				/* use coff format */
#else   /* coff */
#if	defined(INCLUDE_ELF)
    bootElfInit ();				/* use elf format */
#endif
#endif 						/* mips cpp no elif */
#endif
#endif

    /* ROS_BSP */

    flashInit();
    NvRamInit  ();

    /* identify machine type */
    b_getMachineType ();

    /* right board delay for slave @/
    taskDelay ((LOC_NUMBER == 1 ? 5:0) * sysClkRateGet());
    */
    contendForMaster();
    if (boardIsMaster() == TRUE)
        {
        masterHwInit ();
        }
    else
        {
        slaveHwInit();

#ifdef WAIT_MASTER_READY
        {
#define MAX_RETRY_TIMES 300

        int retryCnt;

        for (retryCnt = 0; retryCnt <= MAX_RETRY_TIMES; retryCnt++)
            {
            if (mateBoardIsReady() == TRUE)
                break;
            else
                taskDelay(sysClkRateGet());

            if (retryCnt == MAX_RETRY_TIMES)
                {
                b_cardReset(); /* reset my board */
                }
            }
        }
#endif /* WAIT_MASTER_READY */
        }

    /* ROS_BSP end */

#ifdef  INCLUDE_PCMCIA                                       
                                                             
    pcmciaInit ();                      /* init PCMCIA Lib */

#endif /* INCLUDE_PCMCIA */

#ifdef INCLUDE_END
    /* initialize the MUX */

    muxMaxBinds = MUX_MAX_BINDS;
    if (muxLibInit() == ERROR)
	return;                              /* can't return ERROR */

    /* Initialize all the available devices. */
    for (count = 0, pDevTbl = endDevTbl; pDevTbl->endLoadFunc != END_TBL_END;
         pDevTbl++, count++)
        {
        cookieTbl[count].pCookie = muxDevLoad (pDevTbl->unit, pDevTbl->endLoadFunc,
                                       pDevTbl->endLoadString,
                                       pDevTbl->endLoan, pDevTbl->pBSP);
        if (cookieTbl[count].pCookie == NULL)
            {
            printf ("muxLoad failed!\n");
            }

        cookieTbl[count].unitNo=pDevTbl->unit;
	bzero((void *)cookieTbl[count].devName,END_NAME_MAX);
	pDevTbl->endLoadFunc((char*)cookieTbl[count].devName, NULL);

        }
#endif /* INCLUDE_END */
    
    taskSpawn ("tBoot", bootCmdTaskPriority, bootCmdTaskOptions,
		bootCmdTaskStackSize, (FUNCPTR) bootCmdLoop,
		0,0,0,0,0,0,0,0,0,0);

    }
/*******************************************************************************
*
* usrClock - user defined system clock interrupt routine
*
* This routine is called at interrupt level on each clock interrupt.  It is
* installed a call to sysClkConnect().  It calls any other facilities that
* need to know about clock ticks, including the kernel itself.
*
* If the application needs anything to happen at clock interrupt level,
* it should be added to this routine.
*
* NOMANUAL
*/

void usrClock (void)

    {
    tickAnnounce ();	/* announce system tick to kernel */
    }
/*******************************************************************************
*
* bootCmdLoop - read and execute user commands forever (until boot)
*/

LOCAL void bootCmdLoop (void)

    {
    BOOT_PARAMS params;
#ifndef INCLUDE_BOOTSHELL
    char line [BOOT_CMD_MAX_LINE];
    char *pLine;
    int nwords;
    int nbytes;
    int value;
    int adr;
    int adr2;
    FUNCPTR entry;
#endif
    char key = 0;

    /* flush standard input to get rid of any garbage;
     * E.g. the Heurikon HKV2F gets junk in USART if no terminal connected.
     */

    (void) ioctl (STD_IN, FIOFLUSH, 0 /*XXX*/);

    if (sysStartType & BOOT_CLEAR)
	printBootLogo ();

    usrBootLineInit (sysStartType);

    bsp_setBootVerToRam() ;
    
    /* print out any new exception message -
     * the first byte is zeroed after printing so that we won't print
     * it again automatically.  However, 'e' command will still print out
     * the remainder. */
    sysExcMsg   = EXC_MSG_ADRS;
    printExcMsg (sysExcMsg);
    *sysExcMsg = EOS;		/* indicate exception message is old */



    /* start autoboot, unless no-autoboot specified */

    bootStringToStruct (BOOT_LINE_ADRS, &params);
    sysFlags = params.flags;

#if defined(INCLUDE_TSFS_BOOT) && defined(INCLUDE_TSFS_BOOT_VIO_CONSOLE)

    /* Wait for Target Server connection */

    while (!wdbTargetIsConnected())
    	taskDelay (sysClkRateGet());

    /*
     * disable the auto-boot mechanism, because the Target Server may not have
     * time to start its VIO Console before the end of the auto-boot coutdown.
     */

    sysStartType |= BOOT_NO_AUTOBOOT;
#endif

    bspClockInit();

    
    /* ROS_BSP */
#ifdef INCLUDE_BOOTSHELL

    if (ERROR == netInterfaceInit ())
        {
        printErr ("Net interface init failed\n");
        }

    if (tffsDrv () != OK)
        {
        printErr ("tffsDrv failed.\n");
        }

    printf ("Attaching to TFFS... ");
    dosFsInit (NUM_DOSFS_FILES);        /* initialize DOS-FS */  

    if (usrTffsConfig (0, 0, TFFS_VOLUME_NAME) == ERROR)
    {
        printf ("\nReady to format Flash device, please wait...");
        if (tffsDevFormat (0, 0) == ERROR)
        {
            printf ("tffsDevFormat error!\n");
        }
        else
            printf ("done.\n");
        
        if (usrTffsConfig (0, 0, TFFS_VOLUME_NAME) == ERROR)
            printErr ("usrTffsConfig failed.\n");
	}
    else
        printf ("done.\n");

        bshellPreInit();

#endif /* INCLUDE_BOOTSHELL */


    if (!(sysStartType & BOOT_NO_AUTOBOOT) &&
	!(sysFlags & SYSFLG_NO_AUTOBOOT))
	{
	int timeout = TIMEOUT;

	if ((sysStartType & BOOT_QUICK_AUTOBOOT) ||
	    (sysFlags & SYSFLG_QUICK_AUTOBOOT))
	    {
	    timeout = 1;
	    }

	key = autoboot (timeout);	/* doesn't return if successful */
	}


    /* If we're here, either we aren't auto-booting, or we got an error
     * auto-booting, or the auto-booting was stopped. */

    /* put console in line mode */

    (void) ioctl (consoleFd, FIOSETOPTIONS, OPT_TERMINAL);
    /* ROS_BSP */
#ifdef INCLUDE_BOOTSHELL

    printf ("Enter into the shell...\n");
    cmdLoop ();

#else /* INCLUDE_BOOTSHELL */

    /* read and execute the ROM commands */

    printf ("\n");

    FOREVER
	{
	if (key == '@')
	    {
	    line [0] = key;
	    line [1] = EOS;
	    key = 0;
	    }
	else
	    {
	    printf ("[VxWorks Boot]: ");
	    fioRdString (STD_IN, line, sizeof (line));
	    }

	adr = adr2 = 0;
	nwords = 0;

	/* take blanks off end of line */

	pLine = line + strlen (line) - 1;		/* point at last char */
	while ((pLine >= line) && (*pLine == ' '))
	    {
	    *pLine = EOS;
	    pLine--;
	    }

	pLine = line;
	skipSpace (&pLine);

	switch (*(pLine++))
	    {
	    case EOS:		/* blank line */
		break;

	    case 'd':		/* display */
		if ((getArg (&pLine, &adr, HEX, OPT) == OK) &&
		    (getArg (&pLine, &nwords, DEC, OPT) == OK))
		    d ((char *) adr, nwords);
		break;

	    case 'e':		/* exception */
		printExcMsg (sysExcMsg + 1);
		break;

	    case 'f':		/* fill */
		if ((getArg (&pLine, &adr, HEX, !OPT) == OK) &&
		    (getArg (&pLine, &nbytes, DEC, !OPT) == OK) &&
		    (getArg (&pLine, &value, DEC, !OPT) == OK))
		    {
		    bfillBytes ((char *) adr, nbytes, value);
		    }