changelog

grub4dos-0.4.4-2008- 08-src.zip

2002-04-30  Yoshinori K. Okuji  <[e-mail]>

	From Jean-Jacques Michel <[e-mail]>:
	* stage2/boot.c (load_image): For Linux, check if DATA_LEN is
	greater than MULTIBOOT_SEARCH. If that's true, read the rest
	after copying data already read in BUFFER.
	
2002-04-30  Yoshinori K. Okuji  <[e-mail]>

	* stage2/boot.c (load_image): For Linux, don't check if the
	length of protected mode code is greater than or equal to the
	expected length minus 16. Instead, just check if no error
	occurred. That was problematic, because memdisk has no protected
	mode code. Also, I don't see what the magic number 16 was for.
	
2002-04-29  Yoshinori K. Okuji  <[e-mail]>

	* stage2/builtins.c [SUPPORT_SERIAL] (terminal_func): Added a
	new option ``--silent''. This suppresses messages, if specified.
	
2002-04-29  Yoshinori K. Okuji  <[e-mail]>

	* config.guess: New upstream version.
	* config.sub: Likewise.
	
2002-04-20  Yoshinori K. Okuji  <[e-mail]>

	* netboot/config.c (PCI_NIC) [INCLUDE_DAVICOM]: Fix typos.
	Reported by Julien Perrot <[e-mail]>.
	
2002-04-17  Yoshinori K. Okuji  <[e-mail]>

	* stage2/builtins.c [SUPPORT_SERIAL] (terminal_func): Set
	COUNT_LINES to -1, to disable the pager.
	
2002-04-16  Yoshinori K. Okuji  <[e-mail]>

	* docs/grub.texi (Obtaining and Building GRUB): Update the link
	to the binutils site.

2002-04-06  Pavel Roskin  <[e-mail]>

	* util/grub-install.in: Fix hardcoded /dev/hda1.

2002-04-06  Yoshinori K. Okuji  <[e-mail]>

	* stage2/builtins.c [GRUB_UTIL] (dump_func): New function.
	[GRUB_UTIL] (builtin_dump): New variable.
	(builtin_table) [GRUB_UTIL]: Added a pointer to BUILTIN_DUMP.
	* util/grub-install.in: Make sure that GRUB reads the same
	images as the host operating system by comparing the result of
	running the command "dump" with the contents of the OS file.
	
2002-04-04  Yoshinori K. Okuji  <[e-mail]>

	* stage2/builtins.c (setup_func): Don't embed a drive number, if
	unnecessary.
	
2002-03-29  Yoshinori K. Okuji  <[e-mail]>

	* docs/grub.texi (General commands): Added ``pager'' into the
	menu.
	(pager): New subsection.
	(terminal): Added a description about the option
	``--lines=LINES''.

	* configure.in (AC_INIT_AUTOMAKE): Set the version number to
	0.92.
	
2002-03-26  Yoshinori K. Okuji  <[e-mail]>

	* netboot/eepro100.c (eepro100_probe): Increase the delay at the
	initialization.
	
2002-03-26  Yoshinori K. Okuji  <[e-mail]>

	* stage2/boot.c (linux_mem_size): New variable.
	(load_image): Check a mem= option and set LINUX_MEM_SIZE to the
	specified memory size, if any. Otherwise, to zero. When an
	overflow is detected, use LINUX_INITRD_MAX_ADDRESS instead.
	(load_initrd): If LINUX_MEM_SIZE is non-zero, use it instead of
	the actual memory size.
	* stage2/char_io.c (safe_parse_maxint): Use ERR_NUMBER_OVERFLOW
	instead of ERR_NUMBER_PARSING, when an overflow occurs.
	* stage2/common.c [!STAGE1_5] (err_list): Added
	ERR_NUMBER_OVERFLOW.
	* stage2/shared.h (ERR_NUMBER_OVERFLOW): New constant.
	
2002-03-24  Yoshinori K. Okuji  <[e-mail]>

	* stage2/stage2.c (run_menu): Call cls outside the loop to run
	scripts.
	* stage2/cmdline.c (run_script): Prompt a user's intervention,
	only when FALLBACK_ENTRY is negative.
	
2002-02-11  Pavel Roskin  <[e-mail]>

	* util/grub-install.in (find_device): New function - find block
	device for given file or directory.  Resolve symlinks to fix
	problem on Linux with devfs and old device names in /etc/fstab.
	Use find_device() for root_device, bootdir_device and
	grubdir_device.

2002-02-08  Yoshinori K. Okuji  <[e-mail]>

	* grub/main.c (OPT_NO_PAGER): New macro.
	(longopts): Added an entry for "--no-pager".
	(usage): Added a description about "--no-pager".
	(main): In case of OPT_NO_PAGER, set USE_PAGER to zero. The same
	thing is done with OPT_BATCH, because the pager is just harmful
	in batch mode.
	
2002-02-08  Yoshinori K. Okuji  <[e-mail]>

	* stage2/builtins.c (help_func): Show all the commands runnable
	with the command-line interface, if "--all" is specified.
	
2002-02-08  Yoshinori K. Okuji  <[e-mail]>

	An internal pager is implemented.
	
	* stage2/builtins.c (pager_func): New function.
	(builtin_pager): New variable.
	(terminal_func): New option, "--lines=LINES" is added. If this
	option is specified, set MAX_LINES to the value. Otherwise, set
	MAX_LINES to 24.
	(vbeprobe_func): Remove the pager code specific to this
	function.
	(builtin_table): Added a pointer to BUILTIN_PAGER.
	* stage2/char_io.c (max_lines) [!STAGE1_5]: New variable.
	(count_lines) [!STAGE1_5]: Likewise.
	(use_pager) [!STAGE1_5]: Likewise.
	(grub_putchar) [!STAGE1_5]: if C is a newline and COUNT_LINES is
	not -1, count up the number of lines. If it exceeds the maximum
	number of lines minus 2, show a message and wait for input of
	return key. "minus 2" is to reserve space for the message
	printed by this internal pager.
	* stage2/cmdline.c (enter_cmdline): If USE_PAGER is true, set
	COUNT_LINES to zero, before running a command, and reset
	COUNT_LINES to -1 after that.
	* stage2/shared.h (max_lines) [!STAGE1_5]: Declared.
	(count_lines) [!STAGE1_5]: Likewise.
	(use_pager) [!STAGE1_5]: Likewise.
	
2002-02-08  Yoshinori K. Okuji  <[e-mail]>

	* stage2/fsys_jfs.c (jfs_read) [STAGE1_5]: Set and reset
	DISK_READ_FUNC even in Stage 1.5.
	* stage2/fsys_xfs.c (xfs_read) [STAGE1_5]: Likewise.

	* stage2/stage1_5.c (saved_sector): Initialized with -1.
	(cmain): Check if SAVED_SECTOR was set appropriately after
	reading the second sector of Stage 2. If SAVED_SECTOR is not
	set (i.e. it is equal to -1), print an error and stop.
	
2002-02-05  Yoshinori K. Okuji  <[e-mail]>

	* stage2/builtins.c (setup_func): Add a VSTa fs entry into
	STAGE1_5_MAP.
	
2002-02-05  Yoshinori K. Okuji  <[e-mail]>

	* stage2/shared.h (BUILTIN_HELP_LIST): New macro. Used for
	commands whose help messages are listed when no argument is
	specified to the command "help".
	* stage2/builtins.c (builtin_blocklist): Added the attribute
	BUILTIN_HELP_LIST.
	(builtin_boot): Likewise.
	(builtin_bootp): Likewise.
	(builtin_cat): Likewise.
	(builtin_chainloader): Likewise.
	(builtin_color): Likewise.
	(builtin_configfile): Likewise.
	(builtin_device): Likewise.
	(builtin_dhcp): Likewise.
	(builtin_displayapm): Likewise.
	(builtin_displaymem): Likewise.
	(builtin_find): Likewise.
	(builtin_geometry): Likewise.
	(builtin_halt): Likewise.
	(builtin_help): Likewise.
	(builtin_hide): Likewise.
	(builtin_ifconfig): Likewise.
	(builtin_initrd): Likewise.
	(builtin_kernel): Likewise.
	(builtin_makeactive): Likewise.
	(builtin_map): Likewise.
	(builtin_md5crypt): Likewise.
	(builtin_module): Likewise.
	(builtin_modulenounzip): Likewise.
	(builtin_partnew): Likewise.
	(builtin_parttype): Likewise.
	(builtin_quit): Likewise.
	(builtin_rarp): Likewise.
	(builtin_reboot): Likewise.
	(builtin_root): Likewise.
	(builtin_rootnoverify): Likewise.
	(builtin_serial): Likewise.
	(builtin_setkey): Likewise.
	(builtin_setup): Likewise.
	(builtin_terminal): Likewise.
	(builtin_testvbe): Likewise.
	(builtin_tftpserver): Likewise.
	(builtin_unhide): Likewise.
	(builtin_uppermem): Likewise.
	(builtin_vbeprobe): Likewise.

	(help_func): When no argument is specified, if the last entry
	was at the left column, print an extra newline.
	
2002-02-05  Yoshinori K. Okuji  <[e-mail]>

	* stage2/shared.h (BUILTIN_HIDDEN): Renamed to ...
	(BUILTIN_NO_ECHO): ... this. The old name was too difficult to
	see _what_ was hidden.
	
2002-02-05  Yoshinori K. Okuji  <[e-mail]>

	* netboot/misc.c (twiddle): Go back to the bar progress, copied
	from etherboot-5.0.5/src/misc.c. Execute the code only if DEBUG
	is true.
	
2002-02-05  Yoshinori K. Okuji  <[e-mail]>

	* stage2/builtins.c (displaymem_func): Use hex digits to display
	for consistency.
	
2002-02-04  Jason Thomas  <[e-mail]>

	From Denis Kitzman  <[e-mail]>:
	* stage2/Makefile.am (libgrub_a_CFLAGS): Fixed a typo.
	FSYS_XFS, USE_MD5_PASSWORDS, SUPPORT_SERIAL, and
	SUPPORT_HERCULES did not get defined.

2002-01-20  Yoshinori K. Okuji  <[e-mail]>

	* util/grub-image.in: Check stage2 instead of stage2.c to
	determine where the script is invoked, because srcdir may not
	be used for the compilation.
	
2002-01-20  Yoshinori K. Okuji  <[e-mail]>

	* grub/asmstub.c (console_putchar): When not using curses,
	ignore a carriage return, because a newline in Unix is only a
	line feed.
	
2002-01-18  Klaus Reichl  <[e-mail]>

	* stage2/fsys_minix.c (minix_dir): Fixed bug getting filenames
	with MAXNAMELEN right.

	* stage2/char_io.c (get_cmdline, cl_refresh): If TERMINAL_DUMB
	section is always 0.
	Line is only cleared if !TERMINAL_DUMB.

	* grub/main.c (use_curses): Initialize to 0 if !HAVE_LIBCURSES
	(main): Check for curses use and set terminal to dumb if we
	don't use it (helps for --batch and variants of non-curses
	setup).

2002-01-15  Yoshinori K. Okuji  <[e-mail]>

	* configure.in (AM_INIT_AUTOMAKE): The version number is
	upgraded to 0.91.
	
2002-01-15  Yoshinori K. Okuji  <[e-mail]>

	* docs/grub.texi (Preset Menu): New chapter.
	
2002-01-15  Yoshinori K. Okuji  <[e-mail]>

	* docs/grub.texi: Added some text about JFS and XFS.
	
2002-01-08  Yoshinori K. Okuji  <[e-mail]>

	* grub/main.c (use_preset_menu): New variable.
	(OPT_PRESET_MENU): New macro.
	(longopts): Added an entry for "--preset-menu".
	(usage): Added a description for "--preset-menu". Also, change
	the first character of the description for "--device-map" to
	lower case for consistency.
	(main): Set USE_PRESET_MENU to 1 in the case of OPT_PRESET_MENU.
	* stage2/shared.h (use_preset_menu): Declared.
	* stage2/stage2.c [PRESET_MENU_STRING || SUPPORT_DISKLESS]
	(open_preset_menu) [GRUB_UTIL]: If USE_PRESET_MENU is false,
	return zero immediately.

2002-01-08  Yoshinori K. Okuji  <[e-mail]>

	* stage2/common.c [SUPPORT_DISKLESS]
	(setup_diskless_environment): Removed. The feature is moved to
	the preset menu.
	* stage2/stage2.c [SUPPORT_DISKLESS] (preset_menu): Set to the
	string "bootp\n".
	[SUPPORT_DISKLESS] (preset_menu_offset): Defined, as if
	PRESET_MENU_STRING is defined.
	[SUPPORT_DISKLESS] (open_preset_menu): Likewise.
	[SUPPORT_DISKLESS] (read_from_preset_menu): Likewise.
	[SUPPORT_DISKLESS] (close_preset_menu): Likewise.
	
2002-01-06  Yoshinori K. Okuji  <[e-mail]>

	The preset menu has a priority over the configuration file.
	Suggested by Christoph Plattner.
	
	* stage2/stage2.c [PRESET_MENU_STRING] (open_preset_menu):
	Check if PRESET_MENU is not NULL.
	[PRESET_MENU_STRING] (close_preset_menu): Set PRESET_MENU to
	NULL.
	(cmain): New internal function, reset. This function resets
	AUTO_FILL, CONFIG_LEN, MENU_LEN, NUM_ENTRIES, CONFIG_ENTRIES,
	MENU_ENTRIES and call init_config.
	Try to open the preset menu first, and try to open the
	configuration file, only if that failed.
	Even if the preset menu was read, try to open the configuration
	file. This time, opening the preset menu never succeed, because
	close_preset_menu ensures that the preset menu is available at
	most once.
	
2002-01-06  Yoshinori K. Okuji  <[e-mail]>

	* netboot/misc.c (inet_aton): Don't check if *P is an asterisk,
	if I is 3. Reported by Rick (his real name and address are
	unknown).
	
2002-01-03  Yoshinori K. Okuji  <[e-mail]>

	Update the netboot stuff to Etherboot-5.0.5.
	
	* configure.in (--enable-3c590): Removed. This was a mistake.
	(--enable-davicom): New option.
	(--enable-eepro): Likewise.
	(--enable-natsemi): Likewise.
	(--enable-ni5010): Likewise.
	(--enable-sis900): Likewise.
	(--enable-w89c840): Likewise.
	(--enable-3c509-hack): Removed.
	(--enable-ns8390-force-16bit): Likewise.

	* netboot/Makefile.am (libdrivers_a_SOURCES): Added timer.c and
	timer.h.
	(EXTRA_libdrivers_a_SOURCES): Added davicom.c, eepro.c, fa311.c,
	natsemi.c, ni5010.c, sis900.c, sis900.h, tlan.c and w89c840.c.
	(EXTRA_DIST): Added sis900.txt.
	(3c595_drivers): Remove 3c590.o from this.
	(davicom_drivers): New variable.
	(eepro_drivers): Likewise.
	(natsemi_drivers): Likewise.
	(ni5010_drivers): Likewise.
	(sis900_drivers): Likewise.
	(w89c840_drivers): Likewise.
	(3c590_o_CFLAGS): Removed.
	(davicom_o_CFLAGS): New variable.
	(eepro_o_CFLAGS): Likewise.
	(natsemi_o_CFLAGS): Likewise.
	(ni5010_o_CFLAGS): Likewise.
	(sis900_o_CFLAGS): Likewise.
	(w89c840_o_CFLAGS): Likewise.

	* netboot/davicom.c: New file, from Etherboot-5.0.5.
	* netboot/eepro.c: Likewise.
	* netboot/natsemi.c: Likewise.
	* netboot/ni5010.c: Likewise.
	* netboot/sis900.c: Likewise.
	* netboot/sis900.h: Likewise.
	* netboot/sis900.txt: Likewise.
	* netboot/timer.c: Likewise.
	* netboot/timer.h: Likewise.
	* netboot/w89c840.c: Likewise.
	* netboot/fa311.c: Likewise.
	* netboot/tlan.c: Likewise.
	
	* netboot/3c509.c: Copied from Etherboot-5.0.5.
	* netboot/3c509.h: Likewise.
	* netboot/3c595.c: Likewise.
	* netboot/3c90x.c: Likewise.
	* netboot/3c90x.txt: Likewise.
	* netboot/cards.h: Likewise.
	* netboot/cs89x0.c: Likewise.
	* netboot/depca.c: Likewise.
	* netboot/eepro100.c: Likewise.
	* netboot/epic100.c: Likewise.
	*