example.c

单片机之间的通讯（多个） 可以设定选择接收端 KEIL C 开发平台 PROTEUS 测试过 附有proteus 原理图

#include <reg51.h> 
#include <string.h> 
#include"lcd.h"

#define INBUF_LEN 4 //数据长度 

unsigned char inbuf1[INBUF_LEN],inbuf2[INBUF_LEN]; 
unsigned char checksum,count3; 
bit read_flag= 1 ; 

void init_serialcomm( void ) 
{
///* 
inbuf1[0]='A';
inbuf1[1]='B';
inbuf1[2]='C';
inbuf1[3]='D';
//*/
//inbuf1[INBUF_LEN]={'a','b','c','d'};
SCON = 0x50 ; //SCON: serail mode 1, 8-bit UART, enable ucvr  字串8 
TMOD |= 0x20 ; //TMOD: timer 1, mode 2, 8-bit reload 
PCON |= 0x80 ; //SMOD=1; 
TH1 = 0xF4 ; //Baud:4800 fosc=11.0592MHz 
IE |= 0x90 ; //Enable Serial Interrupt 
TR1 = 1 ; // timer 1 run 
// TI=1; 
} 

//向串口发送一个字符 
void send_char_com( unsigned char ch) 
{ 
SBUF=ch; 
while (TI== 0 ); 
TI= 0 ; 
} 

//向串口发送一个字符串，strlen为该字符串长度 
void send_string_com( unsigned char *str, unsigned int strlen) 
{ 
unsigned int k= 0 ; 
do 
{ 
send_char_com(*(str + k)); 
k++; 
} while (k < strlen); 
}  





//串口接收中断函数 
void serial () interrupt 4 using 3 
{ 
if (RI) 
{ 
unsigned char ch; 
RI = 0 ; 
ch=SBUF; 
if (ch> 127 ) 
{ 
count3= 0 ; 
inbuf2[count3]=ch; 
checksum= ch- 128 ; 
} 
else 
{ 
count3++; 
inbuf2[count3]=ch; 
checksum ^= ch; 
if ( (count3==(INBUF_LEN- 1 )) && (!checksum) ) 
{ 
read_flag= 1 ; //如果串口接收的数据达到INBUF_LEN个，且校验没错， 
//就置位取数标志 
} 
} 
} 
} 


main() 
{ 
init_LCD();
clear_LCD();
init_serialcomm(); //初始化串口 
while ( 1 ) 
{ 
//if (read_flag) //如果取数标志已置位，就将读到的数从串口发出 
{//  字 
read_flag= 0 ; //取数标志清0 
gotoxy(1,0);
display_LCD_string(inbuf2);
send_string_com(inbuf1,INBUF_LEN); 

} 
} 

}