intial.lst

基于51单片机系统

C51 COMPILER V8.02   INTIAL                                                                03/07/2008 18:56:32 PAGE 1   


C51 COMPILER V8.02, COMPILATION OF MODULE INTIAL
OBJECT MODULE PLACED IN intial.OBJ
COMPILER INVOKED BY: D:\Keil C51\C51\BIN\C51.EXE intial.c BROWSE DEBUG OBJECTEXTEND

line level    source

   1          #include <at89x52.h>
   2          #include "define.h"
   3          #include "command.h"
   4          
   5          void Initial(void)
   6          {
   7   1              IE = 0x9f;    //允许T1、T0中断，INT0、INT1中断，串口中断
   8   1              IP = 0x15;    //设定两个外部中断及串口中断优先级为高
   9   1              IT0 = 1;          //外部中断设为边延触发方式
  10   1              IT1 = 1;
  11   1      
  12   1              TMOD = 0x22;  //T0、T1, 定时器，工作模式2
  13   1              TH0 = 0x47;   //TH0设初值，计数周期约0.1ms
  14   1              TL0 = 0x00;
  15   1              TH1 = 0x47;   //TH1设初值，计数周期约0.1ms
  16   1              TL1 = 0x00;
  17   1              
  18   1              SCON = 0x40;    // 设定串口工作在模式1
  19   1              T2CON = 0x30;   // 设定T2为波特率发生器
  20   1              RCAP2H = 0xff;  
  21   1              RCAP2L = 0xb8;  // 设定T2初值，波特率为 ee:38400   dc:19200   b8:9600
  22   1      
  23   1              P0 = 0xff;
  24   1              P1 = 0xff;
  25   1              P2 = 0xff;
  26   1              P3 = 0xff;
  27   1      
  28   1              LCDInitial();
  29   1      }


MODULE INFORMATION:   STATIC OVERLAYABLE
   CODE SIZE        =     51    ----
   CONSTANT SIZE    =   ----    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
   DATA SIZE        =   ----    ----
   IDATA SIZE       =   ----    ----
   BIT SIZE         =   ----    ----
END OF MODULE INFORMATION.


C51 COMPILATION COMPLETE.  0 WARNING(S),  0 ERROR(S)