scgcmd.h

创建一个符合iso-9660标准的iso文件系统

/* @(#)scgcmd.h	2.15 99/10/18 Copyright 1986 J. Schilling */
/*
 *	Definitions for the SCSI general driver 'scg'
 *
 *	Copyright (c) 1986 J. Schilling
 */
/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifndef	_SCG_SCGCMD_H
#define	_SCG_SCGCMD_H

#include <utypes.h>
#include <btorder.h>

#if	defined(_BIT_FIELDS_LTOH)	/* Intel byteorder */
#elif	defined(_BIT_FIELDS_HTOL)	/* Motorola byteorder */
#else 
/*
 * #error will not work for all compilers (e.g. sunos4)
 * The following line will abort compilation on all compilers
 * if none of the above is defines. And that's  what we want.
 */
error  One of _BIT_FIELDS_LTOH or _BIT_FIELDS_HTOL must be defined
#endif

#include <scg/scsisense.h>
#include <scg/scsicdb.h>
#include <intcvt.h>

/*
 * Messages that SCSI can send.
 */
#define SC_COMMAND_COMPLETE	0x00
#define SC_SYNCHRONOUS		0x01
#define SC_SAVE_DATA_PTR	0x02
#define SC_RESTORE_PTRS		0x03
#define SC_DISCONNECT		0x04
#define SC_ABORT		0x06
#define SC_MSG_REJECT		0x07
#define SC_NO_OP		0x08
#define SC_PARITY		0x09
#define SC_IDENTIFY		0x80
#define SC_DR_IDENTIFY		0xc0
#define SC_DEVICE_RESET		0x0c

#define	SC_G0_CDBLEN	6	/* Len of Group 0 commands */
#define	SC_G1_CDBLEN	10	/* Len of Group 1 commands */
#define	SC_G5_CDBLEN	12	/* Len of Group 5 commands */

#define	SCG_MAX_CMD	24	/* 24 bytes max. size is supported */
#define	SCG_MAX_STATUS	3	/* XXX (sollte 4 allign.) Mamimum Status Len */
#define	SCG_MAX_SENSE	32	/* Mamimum Sense Len for auto Req. Sense */

#define	DEF_SENSE_LEN	16	/* Default Sense Len */
#define	CCS_SENSE_LEN	18	/* Sense Len for CCS compatible devices */

struct	scg_cmd {
	caddr_t	addr;			/* Address of data in user space */
	int	size;			/* DMA count for data transfer */
	int	flags;			/* see below for definition */
	int	cdb_len;		/* Size of SCSI command in bytes */
					/* NOTE: rel 4 uses this field only */
					/* with commands not in group 1 or 2*/
	int	sense_len;		/* for intr() if -1 don't get sense */
	int	timeout;		/* timeout in seconds */
					/* NOTE: actual resolution depends */
					/* on driver implementation */
	int	kdebug;			/* driver kernel debug level */
	int	resid;			/* Bytes not transfered */
	int	error;			/* Error code from scgintr() */
	int	ux_errno;		/* UNIX error code */
#ifdef	comment
XXX	struct	scsi_status scb; ???	/* Status returnd by command */
#endif
	union {
		struct	scsi_status Scb;/* Status returnd by command */
		u_char	cmd_scb[SCG_MAX_STATUS];
	} u_scb;
#define	scb	u_scb.Scb
#ifdef	comment
XXX	struct	scsi_sense sense; ???	/* Sense bytes from command */
#endif
	union {
		struct	scsi_sense Sense;/* Sense bytes from command */
		u_char	cmd_sense[SCG_MAX_SENSE];
	} u_sense;
#define	sense	u_sense.Sense
	int	sense_count;		/* Number of bytes valid in sense */
	int	target;			/* SCSI target id */
	union {				/* SCSI command descriptor block */
		struct	scsi_g0cdb g0_cdb;
		struct	scsi_g1cdb g1_cdb;
		struct	scsi_g5cdb g5_cdb;
		u_char	cmd_cdb[SCG_MAX_CMD];
	} cdb;				/* 24 bytes max. size is supported */
};

#define	dma_read	flags		/* 1 if DMA to Sun, 0 otherwise */

/*
 * definition for flags field in scg_cmd struct
 */
#define	SCG_RECV_DATA	0x0001		/* DMA direction to Sun */
#define	SCG_DISRE_ENA	0x0002		/* enable disconnect/reconnect */
#define	SCG_SILENT	0x0004		/* be silent on errors */
#define	SCG_CMD_RETRY	0x0008		/* enable retries */
#define	SCG_NOPARITY	0x0010		/* disable parity for this command */

/*
 * definition for error field in scg_cmd struct
 *
 * The codes refer to SCSI general errors, not to device
 * specific errors.  Device specific errors are discovered
 * by checking the sense data.
 * The distinction between retryable and fatal is somewhat ad hoc.
 */
#define SCG_NO_ERROR	0		/* cdb transported without error */
#define SCG_RETRYABLE	1		/* any other case */
#define SCG_FATAL	2		/* could not select target */
#define SCG_TIMEOUT	3		/* driver timed out */

#endif	/* _SCG_SCGCMD_H */