__projnav.log

TMS3205402Verilog HDL源码

Project Navigator Auto-Make Log File
-------------------------------------

JHDPARSE - VHDL/Verilog Parser.
ISE 5.1i Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Scanning    C:/Xilinx/verilog/src/iSE/unisim_comp.v
Scanning    TOP.v
Writing TOP.jhd.

JHDPARSE complete -    0 errors,    0 warnings.



Project Navigator Auto-Make Log File
-------------------------------------


Started process "Lock Pins".

Error: top.gyd does not exist. 
 You must fit the design successfully before running this utility.

Completed process "Lock Pins".


Project Navigator Auto-Make Log File
-------------------------------------




Started process "Synthesize".


=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling source file "top.prj"
Compiling include file "TOP.v"
Module <top> compiled
Compiling include file "C:/Xilinx/verilog/src/iSE/unisim_comp.v"
No errors in compilation

=========================================================================
*                            HDL Analysis                               *
=========================================================================
Analysis of file <top.prj> succeeded.
 
 
Analyzing top module <top>.
WARNING:Xst:905 - TOP.v line 75: The signals <EA> are missing in the sensitivity list of always block.
Module <top> is correct for synthesis.

=========================================================================
*                           HDL Synthesis                               *
=========================================================================

Synthesizing Unit <top>.
    Related source file is TOP.v.
WARNING:Xst:646 - Signal <iord> is assigned but never used.
    Found 4-bit register for signal <EA>.
    Found 16-bit tristate buffer for signal <DO>.
WARNING:Xst:647 - Input <IS> is never used.
    Summary:
	inferred  16 Tristate(s).
Unit <top> synthesized.


=========================================================================
HDL Synthesis Report

Macro Statistics
# Registers                        : 1
  4-bit register                   : 1
# Tristates                        : 16
  1-bit tristate buffer            : 16

=========================================================================

=========================================================================
*                         Low Level Synthesis                           *
=========================================================================
Library "C:/Xilinx/xc9500xl/data/lib.xst" Consulted
Library "C:/Xilinx/data/librtl.xst" Consulted

Optimizing unit <top> ...

Completed process "Synthesize".



Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -i -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
Reading component libraries for design expansion...

Checking timing specifications ...
Checking expanded design ...

NGDBUILD Design Results Summary:
  Number of errors:     0
  Number of warnings:   0

Writing NGD file "top.ngd" ...

Writing NGDBUILD log file "top.bld"...

NGDBUILD done.

Completed process "Translate".



Started process "Fit".

Release 5.2i - CPLD Optimizer/Partitioner F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.
Considering device XC95144XL-TQ144.
Flattening design..
Multi-level logic optimization...
Timing optimization..........
Timing driven global resource optimization
General global resource optimization........
Re-checking device resources ...
Mapping a total of 29 equations into 8 function blocks.............................................................................................................................................................................................

Design top has been optimized and fit into device XC95144XL-10-TQ144.

Completed process "Fit".





Project Navigator Auto-Make Log File
-------------------------------------


Started process "Lock Pins".

pin2ucf: Xilinx Pin Locker F.28.Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.


Pin Locking constraints file generated in : top_locked.ucf

Completed process "Lock Pins".



Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
ERROR:NgdBuild:765 - Line 71 in 'top.ucf': A parsing error has occurred while
   reading the constraint file. The value 'e' at column 1 is invalid.
ERROR:NgdBuild:31 - Errors found while parsing .ucf file "top.ucf".  Please
   check for syntax errors in the UCF file.  For more information on legal UCF
   constraints, please see the Constraints Guide for more information on this
   attribute.

Writing NGDBUILD log file "top.bld"...
Error: 

Completed process "Translate".


Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
ERROR:NgdBuild:765 - Line 71 in 'top.ucf': A parsing error has occurred while
   reading the constraint file. The value 'e' at column 1 is invalid.
ERROR:NgdBuild:31 - Errors found while parsing .ucf file "top.ucf".  Please
   check for syntax errors in the UCF file.  For more information on legal UCF
   constraints, please see the Constraints Guide for more information on this
   attribute.

Writing NGDBUILD log file "top.bld"...
Error: 

Completed process "Translate".


Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
ERROR:NgdBuild:765 - Line 71 in 'top.ucf': A parsing error has occurred while
   reading the constraint file. The value 'e' at column 1 is invalid.
ERROR:NgdBuild:31 - Errors found while parsing .ucf file "top.ucf".  Please
   check for syntax errors in the UCF file.  For more information on legal UCF
   constraints, please see the Constraints Guide for more information on this
   attribute.

Writing NGDBUILD log file "top.bld"...
Error: 

Completed process "Translate".


Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
ERROR:NgdBuild:765 - Line 71 in 'top.ucf': A parsing error has occurred while
   reading the constraint file. The value 'e' at column 1 is invalid.
ERROR:NgdBuild:31 - Errors found while parsing .ucf file "top.ucf".  Please
   check for syntax errors in the UCF file.  For more information on legal UCF
   constraints, please see the Constraints Guide for more information on this
   attribute.

Writing NGDBUILD log file "top.bld"...
Error: 

Completed process "Translate".


Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
ERROR:NgdBuild:765 - Line 71 in 'top.ucf': A parsing error has occurred while
   reading the constraint file. The value 'e' at column 1 is invalid.
ERROR:NgdBuild:31 - Errors found while parsing .ucf file "top.ucf".  Please
   check for syntax errors in the UCF file.  For more information on legal UCF
   constraints, please see the Constraints Guide for more information on this
   attribute.

Writing NGDBUILD log file "top.bld"...
Error: 

Completed process "Translate".


Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
ERROR:NgdBuild:765 - Line 71 in 'top.ucf': A parsing error has occurred while
   reading the constraint file. The value 'e' at column 1 is invalid.
ERROR:NgdBuild:31 - Errors found while parsing .ucf file "top.ucf".  Please
   check for syntax errors in the UCF file.  For more information on legal UCF
   constraints, please see the Constraints Guide for more information on this
   attribute.

Writing NGDBUILD log file "top.bld"...
Error: 

Completed process "Translate".


Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
ERROR:NgdBuild:765 - Line 71 in 'top.ucf': A parsing error has occurred while
   reading the constraint file. The value 'e' at column 1 is invalid.
ERROR:NgdBuild:31 - Errors found while parsing .ucf file "top.ucf".  Please
   check for syntax errors in the UCF file.  For more information on legal UCF
   constraints, please see the Constraints Guide for more information on this
   attribute.

Writing NGDBUILD log file "top.bld"...
Error: 

Completed process "Translate".


Project Navigator Auto-Make Log File
-------------------------------------


Started process "Translate".

Release 5.2i - ngdbuild F.28
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -dd _ngo -uc top.ucf -p xc9500xl top.ngc top.ngd 

Reading NGO file "D:/1tank/cpld/top.ngc" ...
Reading component libraries for design expansion...

Annotating constraints to design from file "top.ucf" ...
ERROR:NgdBuild:755 - Line 304 in 'top.ucf': Could not find net(s) 'A[0]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 305 in 'top.ucf': Could not find net(s) 'A[1]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 306 in 'top.ucf': Could not find net(s) 'A[2]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 307 in 'top.ucf': Could not find net(s) 'A[3]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 313 in 'top.ucf': Could not find net(s) 'D[0]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 314 in 'top.ucf': Could not find net(s) 'D[1]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 315 in 'top.ucf': Could not find net(s) 'D[2]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 316 in 'top.ucf': Could not find net(s) 'D[3]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 317 in 'top.ucf': Could not find net(s) 'D[4]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 318 in 'top.ucf': Could not find net(s) 'D[5]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 319 in 'top.ucf': Could not find net(s) 'D[6]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 320 in 'top.ucf': Could not find net(s) 'D[7]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 321 in 'top.ucf': Could not find net(s) 'D[8]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 322 in 'top.ucf': Could not find net(s) 'D[9]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 323 in 'top.ucf': Could not find net(s) 'D[10]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 324 in 'top.ucf': Could not find net(s) 'D[11]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 325 in 'top.ucf': Could not find net(s) 'D[12]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 326 in 'top.ucf': Could not find net(s) 'D[13]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 327 in 'top.ucf': Could not find net(s) 'D[14]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 328 in 'top.ucf': Could not find net(s) 'D[15]' in the
   design.  To suppress this error use the -aul switch, specify the correct net
   name or remove the constraint.
ERROR:NgdBuild:755 - Line 329 in 'top.ucf': Could not find net(s) 'EA[15]' in
   the design.  To suppress this error use the -aul switch, specify the correct
   net name or remove the constraint.
ERROR:NgdBuild:755 - Line 330 in 'top.ucf': Could not find net(s) 'EA[16]' in
   the design.  To suppress this error use the -aul switch, specify the correct