targetreference_13.h

用 Hitex 工具软件开发 stm32 的例子

#define   Rep_Info_VIDPID_str          0x41   /*   4   T   App   Answer to VID/PID request   */
#define   Rep_Info_Serial_Str          0x42   /*   Str Length   T   App   Answer to Serial String request   */
#define   Rep_Info_Prod_Str            0x43   /*   Str Length   T   App   Answer to Product String request   */
#define   Rep_Info_Pwr_Def             0x44   /*   2   T   App   Answer to Power definitions request   */
#define   Rep_Info_Version             0x46   /*   2   T   App   Answer to Version request   */
#define   Rep_Info_Poll_Intervall      0x48   /*   1   T   App   Reply the polling interval   */
#define   Rep_Info_Config_Application  0x49   /*   4   T   App   Reply the applications parameter   */
#define   Cmd_Set_Config_Application   0x4A   /*   4   T   GUI   Set the applications parameter   */

/*      Measurement ?4.6                     */
#define   Cmd_Get_Temp                 0x50   /*   0   T   GUI   Request Temperatur   */
#define   Rep_Info_Temp                0x50   /*   1   T   App   Request Temperatur   */
#define   Cmd_Get_VU1                  0x51   /*   0   T   GUI   Request State and value VU1   */
#define   Rep_Info_VU1                 0x51   /*   3   T   App   Reply State and value VU1   */
#define   Cmd_Enable_VU1               0x52   /*   1   T   GUI   Enable/Disable VU1   */
#define   Cmd_Get_Amb_Light            0x53   /*   0   T   GUI   Request State and value Sensor   */
#define   Rep_Info_Amb_Light           0x53   /*   3   T   App   Reply State and value sensor   */
#define   Cmd_Enable_Amb_Light         0x54   /*   1   T   GUI   Enable/Disable Sensor   */
#define   Cmd_Get_Trigger              0x55   /*   0   T   GUI   Request of trigger settings   */
#define   Rep_Info_Trigger             0x55   /*   1   T   App   Reply of trigger settings   */
#define   Cmd_Set_Trigger              0x56   /*   1   T   GUI   Set trigger settings   */
#define   Cmd_Get_Scanner              0x57   /*   0   T   GUI   Request Scanner State   */
#define   Rep_Info_Scanner             0x57   /*   1   T   App   Reply Scanner State   */
#define   Cmd_Enable_Scanner           0x58   /*   1   T   GUI   Enable/Disable Scanner and mode   */
#define   Cmd_Get_Meassurement         0x59   /*   0   T   GUI   Request the scanner data   */
#define   Rep_Info_Meassurement        0x59   /*   4   T   App   Reply the scanner data   */
#define   Cmd_Get_Spectrum             0x5A   /*   0   T   GUI   Request the state of Spectrum   */
#define   Rep_Info_Spectrum            0x5A   /*   1   T   App   Reply Spectrum State   */
#define   Cmd_Enable_Spectrum          0x5B   /*   1   T   GUI   Enable/Disable Spectrum   */
#define   Cmd_Get_Spectrum_Data        0x5C   /*   0   T   GUI   Request the Spectrum data   */
#define   Rep_Info_Spectrum_Data       0x5C   /*   128   T   App   Reply the Spectrum data   */
#define   Cmd_Get_Oversampling         0x5D   /*   0   T   GUI   Request the state Oversampling   */
#define   Rep_Info_Oversampling        0x5D   /*   1   T   App   Reply Overampling State   */
#define   Cmd_Enable_Oversampling      0x5E   /*   1   T   GUI   Enable/Disable Oversampling   */
/*      I2C ?4.7                     */
#define   Cmd_Get_I2C                  0x60   /*   0   T   GUI   Status request of the I2C enabled   */
#define   Rep_Info_I2C                 0x60   /*   1   T   App   I2C module state   */
#define   Cmd_I2C_Msg                  0x61   /*   length   T   GUI   Message to the I2C Module,Message to the GUI   */
#define   Rep_I2C_Msg                  0x61   /*   length   T   App   Message to the I2C Module,Message to the GUI   */
#define   Cmd_Get_I2C_Mode             0x62   /*   0   T   GUI   Request the mode of the I2C   */
#define   Rep_Info_I2C_Mode            0x62   /*   2   T   App   Reply I2C _Get Mode   */
#define   Cmd_Set_I2C_Mode             0x63   /*   2   T   GUI   Set the I2C mode   */
#define   Cmd_Enable_I2C               0x65   /*   1   T   GUI   Start/Stop the I2C   */

/*      CAN ?4.8                     */
#define   Cmd_Get_CAN                  0x70   /*   0   T   GUI   Status request of the CAN enabled   */
#define   Rep_Info_CAN                 0x70   /*   1   T   App   CAN module state   */
#define   Cmd_CAN_Msg                  0x71   /*   12  T  GUI container for CAN message */
#define   Rep_CAN_Msg                  0x71   /*   12   T   GUI, App   Message to the CAN Module,Message to the GUI   */
#define   Cmd_Get_CAN_Mode             0x72   /*   0   T   GUI   Request the mode of the CAN   */
#define   Rep_Info_CAN_Mode            0x72   /*   2   T   App   Reply CAN_Get Mode   */
#define   Cmd_Set_CAN_Mode             0x73   /*   2   T   GUI   Set the CAN mode   */
#define   Cmd_Enable_CAN               0x75   /*   1   T   GUI   Start/Stop the CAN   */

/*      IO ?4.9                     */
#define   Cmd_Get_IO_FktA              0x90   /*   0   T   GUI   Request of IO A function   */
#define   Rep_Info_IO_FktA             0x90   /*   8   T   App   Reply of IO A function   */
#define   Cmd_Set_IO_FktA              0x91   /*   8   T   GUI   Settings for IO A function   */
#define   Cmd_Get_IO_FktB              0x92   /*   0   T   GUI   Request of IO B function   */
#define   Rep_Info_IO_FktB             0x92   /*   8   T   App   Reply of IO B function   */
#define   Cmd_Set_IO_FktB              0x93   /*   8   T   GUI   Settings for IO B function   */
#define   Cmd_Get_IO_FktC              0x94   /*   0   T   GUI   Request of the IO function   */
#define   Rep_Info_IO_FktC             0x94   /*   8   T   App   Reply of IO C function   */
#define   Cmd_Set_IO_FktC              0x95   /*   8   T   GUI   Settings for IO C function   */
#define   Cmd_Get_IO_FktD              0x96   /*   0   T   GUI   Request of IO D function   */
#define   Rep_Info_IO_FktD             0x96   /*   8   T   App   Reply of IO D function   */
#define   Cmd_Set_IO_FktD              0x97   /*   8   T   GUI   Settings for IO D function   */

#define   Cmd_Get_ADC                  0x98   /*   1   T   GUI   Request ADC channel   */
#define   Rep_Info_ADC                 0x98   /*   2   T   App   Reply requested ADC channel   */

#define   Cmd_Get_EXTInt               0x99   /*   0   T   GUI   Request ExtInt settings   */
#define   Rep_Info_EXTInt              0x99   /*   4   T   App   Reply ExtInt settings   */
#define   Cmd_Set_EXTInt               0x9A   /*   4   T   GUI   Set ExtInt settings   */
#define   Cmd_Get_PORT                 0x9B   /*   0   T   GUI   Request Input portx   */
#define   Rep_Info_PORT                0x9B   /*   4   T   App   Reply Input portx   */
#define   Cmd_Set_PORT                 0x9C   /*   4   T   GUI   Set Output portx   */
#define   Cmd_Get_Alternate            0x9D   /*   0   T   GUI   Request Alternate functions   */
#define   Rep_Info_Alternate           0x9D   /*   4   T   App   Reply Alternate functions   */
#define   Cmd_Set_Alternate            0x9E   /*   4   T   GUI   Set Alternate functions   */

/*      UART/IRDA/RC ?4.10                     */
#define   Cmd_Get_UIR                  0xC0   /*   0   T   GUI   Request UIR state   */
#define   Rep_Info_UIR                 0xC0   /*   1   T   App   Reply UIR state   */
#define   Cmd_Enable_UIR               0xC1   /*   1   T   GUI   Enable/Disable UIR and Mode   */
#define   Cmd_Get_UIR_Data             0xC2   /*   0   T   GUI   Request Data from UIR   */
#define   Cmd_Info_UIR_Data            0xC2   /*   length   T   GUI   Reply Data from UIR   */

/* USB control */
#define   USB_Shape_Line               0x01
#define   USB_Shape_Triangle           0x02
#define   USB_Shape_Square             0x03
#define   USB_Shape_Hexagon            0x04
#define   USB_Shape_Octagon            0x05

#define   USB_Shape_Size4              0x01
#define   USB_Shape_Size8              0x02
#define   USB_Shape_Size32             0x03
#define   USB_Shape_Size64             0x04
#define   USB_Shape_Size128            0x05

#define   USB_Step_Size1               0x01
#define   USB_Step_Size2               0x02
#define   USB_Step_Size4               0x03
#define   USB_Step_Size8               0x04
#define   USB_Step_Size16              0x05
#define   USB_Step_Size32              0x06

#endif /* __TARGET_REF_H__ */