lcd800480.cpp

广嵌中心GEC2410开发板板级支持包

/**************************************************************
The initial and control for 320×240 16Bpp TFT LCD----3.5寸竖屏
**************************************************************/
#include "precomp.h"


#include <string.h>
#include "def.h"
#include "2410addr.h"
#include "2410slib.h"
#include "2410lib.h"
#include "LCD_TX06D18.h"

#define MVAL		(13)
#define MVAL_USED 	(0)		//0=each frame   1=rate by MVAL
#define INVVDEN		(1)		//0=normal       1=inverted
#define BSWP		(0)		//Byte swap control
#define HWSWP		(1)		//Half word swap control

#define M5D(n) ((n) & 0x1fffff)	// To get lower 21bits

//TFT 240320
#define LCD_XSIZE_TFT_240320 	(240)	
#define LCD_YSIZE_TFT_240320 	(320)
#define LCD_XSIZE_TFT_800480 	(800)	
#define LCD_YSIZE_TFT_800480 	(480)

//TFT 240320
#define SCR_XSIZE_TFT_240320 	(640)
#define SCR_YSIZE_TFT_240320 	(480)
#define SCR_XSIZE_TFT_800480	(800)
#define SCR_YSIZE_TFT_800480 	(480)

//TFT240320
#define HOZVAL_TFT_240320		(LCD_XSIZE_TFT_240320-1)
#define LINEVAL_TFT_240320	(LCD_YSIZE_TFT_240320-1)
#define HOZVAL_TFT_800480		(LCD_XSIZE_TFT_800480-1)
#define LINEVAL_TFT_800480	(LCD_YSIZE_TFT_800480-1)

//Timing parameter for LCD
#define VBPD_240320		(2)		//垂直同步信号的后肩
#define VFPD_240320		(2)		//垂直同步信号的前肩
#define VSPW_240320		(4)		//垂直同步信号的脉宽

#define HBPD_240320		(8)		//水平同步信号的后肩
#define HFPD_240320		(8)		//水平同步信号的前肩
#define HSPW_240320		(6)		//水平同步信号的脉宽

//Timing parameter for LCD   800*480	-----同步模式
/*
#define VBPD_800480		(28)		//垂直同步信号的后肩
#define VFPD_800480		(12)		//垂直同步信号的前肩
#define VSPW_800480		(2)		//垂直同步信号的脉宽

#define HBPD_800480		(39)		//水平同步信号的后肩
#define HFPD_800480		(39)		//水平同步信号的前肩
#define HSPW_800480		(47)		//水平同步信号的脉宽
*/

#define VBPD_800480		(9)		//垂直同步信号的后肩
#define VFPD_800480		(6)		//垂直同步信号的前肩
#define VSPW_800480		(2)		//垂直同步信号的脉宽

#define HBPD_800480		(10)		//水平同步信号的后肩
#define HFPD_800480		(67)		//水平同步信号的前肩
#define HSPW_800480		(20)		//水平同步信号的脉宽
#define CLKVAL_TFT_800480	(1) 		//22.5MHZ	
//FCLK=180MHz,HCLK=90MHz,VCLK=6.5MHz
static void Lcd_Init(void);
static void Lcd_EnvidOnOff(int onoff);
//static void Lcd_Lpc3600Enable(void);
//static void Lcd_PowerEnable(int invpwren,int pwren);
static void MoveViewPort(void);
static void Lcd_MoveViewPort(int vx,int vy);
static void PutPixel(U32 x,U32 y,U32 c);
//static void Glib_Rectangle(int x1,int y1,int x2,int y2,int color);
static void Glib_FilledRectangle(int x1,int y1,int x2,int y2,int color);
static void Glib_Line(int x1,int y1,int x2,int y2,int color);
static void Lcd_ClearScr(U16 c);
static void Paint_Bmp(int x0,int y0,int h,int l,unsigned char bmp[]);

//extern unsigned char girl13_240_320[];	//宽240，高320
//unsigned char xyx_240_320[];	//宽240，高320

volatile static unsigned short LCD_BUFER[SCR_YSIZE_TFT_800480][SCR_XSIZE_TFT_800480];
void Test_Lcd_Tft_240X320( void );
void LCDreg_VirtualAlloc();

/**************************************************************
320×240 16Bpp TFT LCD数据和控制端口初始化
**************************************************************/
static void Lcd_Port_Init(void)
{   
	volatile IOPreg *s2410IOP;
    volatile LCDreg *s2410LCD;    
    s2410IOP = (IOPreg *)IOP_BASE;
    s2410LCD = (LCDreg *)LCD_BASE;
//	RETAILMSG(1, (TEXT("Lcd_Port_Init\r\n")));
    //rGPCUP = 0xffffffff; // Disable Pull-up register
    s2410IOP->rGPCUP = 0x0; // enable Pull-up register
    //rGPCCON = 0xaaaa56a9; //Initialize VD[7:0],LCDVF[2:0],VM,VFRAME,VLINE,VCLK,LEND 
    s2410IOP->rGPCCON = 0xaaaaaaaa;

    //rGPDUP = 0xffffffff ; // Disable Pull-up register
    s2410IOP->rGPDUP = 0x0 ; // enable Pull-up register
    s2410IOP->rGPDCON=0xaaaaaaaa; //Initialize VD[15:8]
}

/**************************************************************
320×240 16Bpp TFT LCD功能模块初始化
**************************************************************/
static void Lcd_Init(void)
{   	
	volatile IOPreg *s2410IOP;
    volatile LCDreg *s2410LCD;    
    s2410IOP = (IOPreg *)IOP_BASE;
    s2410LCD = (LCDreg *)LCD_BASE;
	RETAILMSG(1, (TEXT("Lcd_Init\r\n")));
	s2410LCD->rLCDCON1=(CLKVAL_TFT_800480<<8)|(MVAL_USED<<7)|(3<<5)|(12<<1)|0;
    	// TFT LCD panel,12bpp TFT,ENVID=off
	s2410LCD->rLCDCON2=(VBPD_800480<<24)|(LINEVAL_TFT_800480<<14)|(VFPD_800480<<6)|(VSPW_800480);
	s2410LCD->rLCDCON3=(HBPD_800480<<19)|(HOZVAL_TFT_800480<<8)|(HFPD_800480);
	s2410LCD->rLCDCON4=(MVAL<<8)|(HSPW_800480);
	//rLCDCON5=(1<<11)|(0<<10) |(1<<9)|(1<<8)|(1<<7) |(0<<6)|(BSWP<<1)|(HWSWP);	//FRM5:6:5,HSYNC and VSYNC are inverted----
	s2410LCD->rLCDCON5=(1<<11)|(0<<10) |(1<<9)|(1<<8)|(0<<7) |(0<<6)|(BSWP<<1)|(HWSWP);	//FRM5:6:5,HSYNC and VSYNC are inverted----LQ035Q7DB02
	
	s2410LCD->rLCDSADDR1=(((U32)LCD_BUFER>>22)<<21)|M5D((U32)LCD_BUFER>>1);
	s2410LCD->rLCDSADDR2=M5D( ((U32)LCD_BUFER+(SCR_XSIZE_TFT_800480*LCD_YSIZE_TFT_800480*2))>>1 );
	s2410LCD->rLCDSADDR3=(((SCR_XSIZE_TFT_800480-LCD_XSIZE_TFT_800480)/1)<<11)|(LCD_XSIZE_TFT_800480/1);
	
	s2410LCD->rLCDINTMSK|=(3); // MASK LCD Sub Interrupt
	s2410LCD->rLPCSEL&=(~7); // Disable LPC3600
	s2410LCD->rTPAL=0; // Disable Temp Palette
}

/**************************************************************
LCD视频和控制信号输出或者停止，1开启视频输出
**************************************************************/
static void Lcd_EnvidOnOff(int onoff)
{   
	volatile IOPreg *s2410IOP;
    volatile LCDreg *s2410LCD;    
    s2410IOP = (IOPreg *)IOP_BASE;
    s2410LCD = (LCDreg *)LCD_BASE;
	RETAILMSG(1, (TEXT("Lcd_EnvidOnOff\r\n")));
    if(onoff==1)
	s2410LCD->rLCDCON1|=1; // ENVID=ON
    else
	s2410LCD->rLCDCON1 =s2410LCD->rLCDCON1 & 0x3fffe; // ENVID Off
}

/**************************************************************
LPC3600 is a timing control logic unit
**************************************************************/
/*
static void Lcd_Lpc3600Enable(void)
{
    rLPCSEL&=~(7);
    rLPCSEL|=(7); // 240320,Enable LPC3600
}    
*/
/**************************************************************
320×240 8Bpp TFT LCD 电源控制引脚使能
**************************************************************/
/*
static void Lcd_PowerEnable(int invpwren,int pwren)
{
    //GPG4 is setted as LCD_PWREN
    rGPGUP = rGPGUP|(1<<4); // Pull-up disable
    rGPGCON = rGPGCON|(3<<8); //GPG4=LCD_PWREN
    //Enable LCD POWER ENABLE Function
    rLCDCON5 = rLCDCON5&(~(1<<3))|(pwren<<3);   // PWREN
    rLCDCON5=rLCDCON5&(~(1<<5))|(invpwren<<5);   // INVPWREN
}
*/
/**************************************************************
320×240 8Bpp TFT LCD 颜色初始化
**************************************************************/
/*
static void Lcd_Palette_Init(void)
{
    unsigned char cdata, p_red, p_green, p_blue;
    U32 *palette;
    
	//#define PALETTE     0x4d000400    //Palette start address
    palette=(U32 *)PALETTE;
    *palette++=0; //black
    for(cdata=1;cdata<255;cdata++)
    {
		p_red=(cdata & 0xe0);
		p_green=(cdata & 0x1c);
		p_blue=(cdata & 0x03);
    	*palette++=((U32)((p_red<<8)|(p_green<<6)|(p_blue<<3)));
    }
    *palette=0xffff; //white
}
*/
/**************************************************************
320×240 16Bpp TFT LCD移动观察窗口
**************************************************************/
static void Lcd_MoveViewPort(int vx,int vy)
{
    U32 addr;
		volatile IOPreg *s2410IOP;
    volatile LCDreg *s2410LCD;    
    s2410IOP = (IOPreg *)IOP_BASE;
    s2410LCD = (LCDreg *)LCD_BASE;
    	RETAILMSG(1, (TEXT("Lcd_MoveViewPort\r\n")));
    SET_IF(); 
	#if (LCD_XSIZE_TFT_240320<32)
    	    while((s2410LCD->rLCDCON1>>18)<=1); // if x<32
	#else	
    	    while((s2410LCD->rLCDCON1>>18)==0); // if x>32
	#endif
    
    addr=(U32)LCD_BUFER+(vx*2)+vy*(SCR_XSIZE_TFT_240320*2);
	s2410LCD->rLCDSADDR1= ( (addr>>22)<<21 ) | M5D(addr>>1 );
	s2410LCD->rLCDSADDR2= M5D(((addr+(SCR_XSIZE_TFT_240320*LCD_YSIZE_TFT_240320*2))>>1));
	CLR_IF();
}    

/**************************************************************
320×240 16Bpp TFT LCD移动观察窗口
**************************************************************/
static void MoveViewPort(void)
{
    int vx=0,vy=0,vd=1;
    /*
    printf("\n*Move the LCD view windos:\n");
    printf(" press 8 is up\n");
    printf(" press 2 is down\n");
    printf(" press 4 is left\n");
    printf(" press 6 is right\n");
    printf(" press Enter to exit!\n");
*/
	RETAILMSG(1, (TEXT("MoveViewPort\r\n")));
    while(1)
    {
    	switch(getkey())
    	{
    	case '2':
	    if(vy>=vd)vy-=vd;    	   	
        break;

    	case '6':
    	    if(vx>=vd)vx-=vd;
    	break;

    	case '4':
                if(vx<=(SCR_XSIZE_TFT_240320-LCD_XSIZE_TFT_800480-vd))vx+=vd;   	    
   	    break;

    	case '8':
                if(vy<=(SCR_YSIZE_TFT_240320-LCD_YSIZE_TFT_800480-vd))vy+=vd;   	    
   	    break;

    	case '\r':
   	    return;

    	default:
	    break;
		}
	//printf("vx=%3d,vy=%3d\n",vx,vy);
	Lcd_MoveViewPort(vx,vy);
    }
}

/**************************************************************
320×240 16Bpp TFT LCD单个象素的显示数据输出
**************************************************************/
static void PutPixel(U32 x,U32 y,U32 c)
{   RETAILMSG(1, (TEXT("PutPixel\r\n")));
	if ( (x < SCR_XSIZE_TFT_800480) && (y < SCR_YSIZE_TFT_800480) )
		LCD_BUFER[(y)][(x)] = c;
}

/**************************************************************
320×240 16Bpp TFT LCD全屏填充特定颜色单元或清屏
**************************************************************/
static void Lcd_ClearScr(U16 c)
{
	unsigned int x,y ;
	RETAILMSG(1, (TEXT("Lcd_ClearScr\r\n")));	
    for( y = 0 ; y < SCR_YSIZE_TFT_800480; y++ )
    {
    	for( x = 0 ; x < SCR_XSIZE_TFT_800480; x++ )
    	{
			LCD_BUFER[y][x] = c;
    	}
    }
}

/**************************************************************
LCD屏幕显示垂直翻转
// LCD display is flipped vertically
// But, think the algorithm by mathematics point.
//   3I2
//   4 I 1
//  --+--   <-8 octants  mathematical cordinate
//   5 I 8