tn3270e-rt-mib

很不错java的SNMP应用例子

      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 17 }

tn3270eRtDataBucket5Rts  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the response times falling into bucket 5.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 18 }

tn3270eRtDataRtMethod OBJECT-TYPE
    SYNTAX       INTEGER {
                           none(0),
                           responses(1),
                           timingMark(2)
                         }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The value of this object indicates the method that was
      used in calculating the IP network time.

      The value 'none(0) indicates that response times were not
      calculated for the IP network."
    ::= { tn3270eRtDataEntry 19 }

tn3270eRtDataDiscontinuityTime OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime on the most recent occasion at
        which one or more of this entry's counter objects
        suffered a discontinuity.  This may happen if a TN3270E
        server is stopped and then restarted, and local methods
        are used to set up collection policy
        (tn3270eRtCollCtlTable entries)."
    ::= { tn3270eRtDataEntry 20 }


tn3270eRtSpinLock OBJECT-TYPE
    SYNTAX      TestAndIncr
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "An advisory lock used to allow cooperating TN3270E-RT-MIB
      applications to coordinate their use of the
      tn3270eRtCollCtlTable.
      When creating a new entry or altering an existing entry
      in the tn3270eRtCollCtlTable, an application should make
      use of tn3270eRtSpinLock to serialize application changes
      or additions.

      Since this is an advisory lock, the use of this lock is
      not enforced."
    ::= { tn3270eRtObjects 3 }

-- Notifications

tn3270eRtExceeded   NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataIntTimeStamp,
       tn3270eRtDataAvgRt,
       tn3270eRtDataAvgIpRt,
       tn3270eRtDataAvgCountTrans,
       tn3270eRtDataRtMethod
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when the average response
      time, tn3270eRtDataAvgRt, exceeds
      tn3270eRtCollCtlThresholdHigh at the end of a collection
      interval specified by tn3270eCollCtlSPeriod
      times tn3270eCollCtlSPMult.  Note that the corresponding
      tn3270eCollCtlType must have traps(5) and average(3) set
      for this notification to be generated.  In addition,
      tn3270eRtDataAvgCountTrans, tn3270eRtCollCtlThreshHigh, and
      tn3270eRtDataAvgRt are algorithmically compared to
      tn3270eRtCollCtlIdleCount for determination if this
      notification will be suppressed."
    ::= { tn3270eRtNotifications 1 }

tn3270eRtOkay   NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataIntTimeStamp,
       tn3270eRtDataAvgRt,
       tn3270eRtDataAvgIpRt,
       tn3270eRtDataAvgCountTrans,
       tn3270eRtDataRtMethod
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when the average response
      time, tn3270eRtDataAvgRt, falls below
      tn3270eRtCollCtlThresholdLow at the end of a collection
      interval specified by tn3270eCollCtlSPeriod times
      tn3270eCollCtlSPMult, after a tn3270eRtExceeded
      notification was generated.  Note that the corresponding
      tn3270eCollCtlType must have traps(5) and average(3)
      set for this notification to be generated."
    ::= { tn3270eRtNotifications 2 }

tn3270eRtCollStart NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataRtMethod,       -- type of collection
       tn3270eResMapElementType     -- type of resource
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when response time data
      collection is enabled for a member of a client group.
      In order for this notification to occur the corresponding
      tn3270eRtCollCtlType must have traps(5) selected.

      tn3270eResMapElementType contains a valid value only if
      tn3270eRtDataClientAddress contains a valid address
      (rather than a zero-length octet string)."
    ::= { tn3270eRtNotifications 3 }

tn3270eRtCollEnd   NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataDiscontinuityTime,
       tn3270eRtDataAvgRt,
       tn3270eRtDataAvgIpRt,
       tn3270eRtDataAvgCountTrans,
       tn3270eRtDataIntTimeStamp,
       tn3270eRtDataTotalRts,
       tn3270eRtDataTotalIpRts,
       tn3270eRtDataCountTrans,
       tn3270eRtDataCountDrs,
       tn3270eRtDataElapsRndTrpSq,
       tn3270eRtDataElapsIpRtSq,
       tn3270eRtDataBucket1Rts,
       tn3270eRtDataBucket2Rts,
       tn3270eRtDataBucket3Rts,
       tn3270eRtDataBucket4Rts,
       tn3270eRtDataBucket5Rts,
       tn3270eRtDataRtMethod
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when an tn3270eRtDataEntry
      is deleted after being active (actual data collected), in
      order to enable a management application monitoring an
      tn3270eRtDataEntry to get the entry's final values.  Note
      that the corresponding tn3270eCollCtlType must have traps(5)
      set for this notification to be generated."
    ::= { tn3270eRtNotifications 4 }

-- Conformance Statement

tn3270eRtGroups       OBJECT IDENTIFIER ::= { tn3270eRtConformance 1 }
tn3270eRtCompliances  OBJECT IDENTIFIER ::= { tn3270eRtConformance 2 }

-- Compliance statements

tn3270eRtCompliance     MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
      "The compliance statement for agents that support the
      TN327E-RT-MIB."
    MODULE   -- this module
       MANDATORY-GROUPS { tn3270eRtGroup, tn3270eRtNotGroup }

    OBJECT tn3270eRtCollCtlType
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation to
          this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlSPeriod
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to allow the user to change
          the default value of this object, and is allowed to
          use a different default."

    OBJECT tn3270eRtCollCtlSPMult
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlThreshHigh
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlThreshLow
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlIdleCount
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry1
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry2
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry3
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry4
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlRowStatus
       SYNTAX   INTEGER {
                         active(1) -- subset of RowStatus
                        }
       MIN-ACCESS read-only
       DESCRIPTION
          "Write access is not required, and only one of the six
          enumerated values for the RowStatus textual convention
          need be supported, specifically: active(1)."

    ::= {tn3270eRtCompliances 1 }

-- Group definitions

tn3270eRtGroup         OBJECT-GROUP
    OBJECTS {
        tn3270eRtCollCtlType,
        tn3270eRtCollCtlSPeriod,
        tn3270eRtCollCtlSPMult,
        tn3270eRtCollCtlThreshHigh,
        tn3270eRtCollCtlThreshLow,
        tn3270eRtCollCtlIdleCount,
        tn3270eRtCollCtlBucketBndry1,
        tn3270eRtCollCtlBucketBndry2,
        tn3270eRtCollCtlBucketBndry3,
        tn3270eRtCollCtlBucketBndry4,
        tn3270eRtCollCtlRowStatus,
        tn3270eRtDataDiscontinuityTime,
        tn3270eRtDataAvgRt,
        tn3270eRtDataAvgIpRt,
        tn3270eRtDataAvgCountTrans,
        tn3270eRtDataIntTimeStamp,
        tn3270eRtDataTotalRts,
        tn3270eRtDataTotalIpRts,
        tn3270eRtDataCountTrans,
        tn3270eRtDataCountDrs,
        tn3270eRtDataElapsRndTrpSq,
        tn3270eRtDataElapsIpRtSq,
        tn3270eRtDataBucket1Rts,
        tn3270eRtDataBucket2Rts,
        tn3270eRtDataBucket3Rts,
        tn3270eRtDataBucket4Rts,
        tn3270eRtDataBucket5Rts,
        tn3270eRtDataRtMethod,
        tn3270eRtSpinLock }
    STATUS  current
    DESCRIPTION
      "This group is mandatory for all implementations that
      support the TN3270E-RT-MIB. "
    ::= { tn3270eRtGroups 1 }

tn3270eRtNotGroup         NOTIFICATION-GROUP
    NOTIFICATIONS {
        tn3270eRtExceeded,
        tn3270eRtOkay,
        tn3270eRtCollStart,
        tn3270eRtCollEnd
     }
    STATUS  current
    DESCRIPTION
      "The notifications that must be supported when the
      TN3270E-RT-MIB is implemented. "
    ::= { tn3270eRtGroups 2 }

END