tn3270e-rt-mib

很不错java的SNMP应用例子

TN3270E-RT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Unsigned32, Gauge32
                FROM SNMPv2-SMI
    RowStatus, DateAndTime, TimeStamp, TestAndIncr
                FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                FROM SNMPv2-CONF
    tn3270eSrvrConfIndex, tn3270eClientGroupName,
    tn3270eResMapElementType
                FROM TN3270E-MIB
    IANATn3270eAddrType, IANATn3270eAddress
                FROM IANATn3270eTC-MIB
    snanauMIB
                FROM SNA-NAU-MIB;

  tn3270eRtMIB   MODULE-IDENTITY
      LAST-UPDATED "9807270000Z" -- July 27, 1998
      ORGANIZATION "TN3270E Working Group"
      CONTACT-INFO
        "Kenneth White ([e-mail])
         IBM Corp. - Dept. BRQA/Bldg. 501/G114
         P.O. Box 12195
         3039 Cornwallis
         RTP, NC 27709-2195

         Robert Moore ([e-mail])
         IBM Corp. - Dept. BRQA/Bldg. 501/G114
         P.O. Box 12195
         3039 Cornwallis
         RTP, NC 27709-2195
         [phone]"
     DESCRIPTION
        "This module defines a portion of the management
        information base (MIB) that enables monitoring of
        TN3270 and TN3270E clients' response times by a
        TN3270E server."
     REVISION  "9807270000Z" -- July 27, 1998
     DESCRIPTION
         "RFC nnnn (Proposed Standard)" -- RFC Editor to fill in
::= { snanauMIB 9 }
-- snanauMIB ::= { mib-2 34 }

-- Top level structure of the MIB

tn3270eRtNotifications   OBJECT IDENTIFIER  ::= { tn3270eRtMIB 0 }
tn3270eRtObjects         OBJECT IDENTIFIER  ::= { tn3270eRtMIB 1 }
tn3270eRtConformance     OBJECT IDENTIFIER  ::= { tn3270eRtMIB 3 }

-- MIB Objects

-- Response Time Control Table

tn3270eRtCollCtlTable  OBJECT-TYPE
    SYNTAX       SEQUENCE OF Tn3270eRtCollCtlEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
      "The response time monitoring collection control table,
      which allows a management application to control the
      types of response time data being collected, and the
      clients for which it is being collected.

      This table is indexed by tn3270eSrvrConfIndex and
      tn3270eClientGroupName imported from the
      TN3270E-MIB.  tn3270eSrvrConfIndex indicates within
      a host which TN3270E server an entry applies to.
      tn3270eClientGroupName it identifies the set of IP
      clients for which response time data is being collected.
      The particular IP clients making up the set are identified
      in the tn3270eClientGroupTable in the TN3270E-MIB."
    ::= { tn3270eRtObjects 1}

tn3270eRtCollCtlEntry    OBJECT-TYPE
    SYNTAX        Tn3270eRtCollCtlEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "An entry in the TN3270E response time monitoring collection
      control table.  To handle the case of multiple TN3270E
      servers on the same host, the first index of this table is
      the tn3270eSrvrConfIndex from the TN3270E-MIB."
    INDEX {
      tn3270eSrvrConfIndex,    -- Server's index
      tn3270eClientGroupName } -- What to collect on
    ::= { tn3270eRtCollCtlTable 1 }

Tn3270eRtCollCtlEntry ::= SEQUENCE {
    tn3270eRtCollCtlType              BITS,
    tn3270eRtCollCtlSPeriod           Unsigned32,
    tn3270eRtCollCtlSPMult            Unsigned32,
    tn3270eRtCollCtlThreshHigh        Unsigned32,
    tn3270eRtCollCtlThreshLow         Unsigned32,
    tn3270eRtCollCtlIdleCount         Unsigned32,
    tn3270eRtCollCtlBucketBndry1      Unsigned32,
    tn3270eRtCollCtlBucketBndry2      Unsigned32,
    tn3270eRtCollCtlBucketBndry3      Unsigned32,
    tn3270eRtCollCtlBucketBndry4      Unsigned32,
    tn3270eRtCollCtlRowStatus         RowStatus   }

-- The OID { tn3270eRtCollCtlEntry 1 } is not used

tn3270eRtCollCtlType  OBJECT-TYPE
    SYNTAX    BITS {
                     aggregate(0),
                     excludeIpComponent(1),
                     ddr(2),
                     average(3),
                     buckets(4),
                     traps(5)
                   }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
      "This object controls what types of response time data to
       collect, whether to summarize the data across the members
       of a client group or keep it individually, whether to
       introduce dynamic definite responses, and whether to
       generate traps.
       aggregate(0)          - Aggregate response time data for the
                               client group as a whole.  If this bit
                               is set to 0, then maintain response
                               time data separately for each member
                               of the client group.
       excludeIpComponent(1) - Do not include the IP-network
                               component in any response times.
       ddr(2)                - Enable dynamic definite response.
       average(3)            - Produce an average response time
                               based on a specified collection
                               interval.
       buckets(4)            - Maintain tn3270eRtDataBucket values in
                               a corresponding tn3270eRtDataEntry,
                               based on the bucket boundaries specified
                               in the tn3270eRtCollCtlBucketBndry
                               objects          .
       traps(5)              - generate the notifications specified
                               in this MIB module.  The
                               tn3270eRtExceeded and tn3270eRtOkay
                               notifications are generated only if
                               average(3) is also specified."
    ::= { tn3270eRtCollCtlEntry 2 }

tn3270eRtCollCtlSPeriod OBJECT-TYPE
    SYNTAX  Unsigned32 (15..86400) -- 15 second min, 24 hour max
    UNITS   "seconds"
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
      "The number of seconds that defines the sample period.
       The actual interval is defined as tn3270eRtCollCtlSPeriod
       times tn3270eRtCollCtlSPMult.

       The value of this object is used only if the corresponding
       tn3270eRtCollCtlType has the average(3) setting."
    DEFVAL   {20}    -- 20 seconds
    ::= { tn3270eRtCollCtlEntry 3 }

tn3270eRtCollCtlSPMult OBJECT-TYPE
    SYNTAX  Unsigned32 (1..5760) -- 5760 x SPeriod of 15 is 24 hours
    UNITS   "period"
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
      "The sample period multiplier; this value is multiplied by
      the sample period, tn3270eRtCollCtlSPeriod, to determine
      the collection interval.
      Sliding-window average calculation can, if necessary, be
      disabled, by setting the sample period multiplier,
      tn3270eRtCollCtlSPMult, to 1, and setting the sample
      period, tn3270eRtCollCtlSPeriod, to the required
      collection interval.

      The value of this object is used only if the corresponding
      tn3270eRtCollCtlType has the average(3) setting."
    DEFVAL   { 30 }    -- yields an interval of 10 minutes when
                       -- used with the default SPeriod value
    ::= { tn3270eRtCollCtlEntry 4 }

tn3270eRtCollCtlThreshHigh  OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The threshold for generating a tn3270eRtExceeded
      notification, signalling that a monitored total response
      time has exceeded the specified limit.  A value of zero
      for this object suppresses generation of this notification.
      The value of this object is used only if the corresponding
      tn3270eRtCollCtlType has average(3) and traps(5) selected.

      A tn3270eRtExceeded notification is not generated again for a
      tn3270eRtDataEntry until an average response time falling below
      the low threshold tn3270eRtCollCtlThreshLow specified for the
      client group has occurred for the entry."

    DEFVAL   { 0 }   -- suppress notifications
    ::= { tn3270eRtCollCtlEntry 5 }

tn3270eRtCollCtlThreshLow   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The threshold for generating a tn3270eRtOkay notification,
      signalling that a monitored total response time has fallen
      below the specified limit.  A value of zero for this object
      suppresses generation of this notification.  The value of
      this object is used only if the corresponding
      tn3270eRtCollCtlType has average(3) and traps(5) selected.

      A tn3270eRtOkay notification is not generated again for a
      tn3270eRtDataEntry until an average response time
      exceeding the high threshold tn3270eRtCollCtlThreshHigh
      specified for the client group has occurred for the entry."
    DEFVAL   { 0 }   -- suppress notifications
    ::= { tn3270eRtCollCtlEntry 6 }

tn3270eRtCollCtlIdleCount   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "transactions"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object is used to determine whether a
      sample that yields an average response time exceeding the
      value of tn3270eRtCollCtlThreshHigh was a statistically
      valid one.  If the following statement is true, then the
      sample was statistically valid, and so a tn3270eRtExceeded
      notification should be generated:

        AvgCountTrans * ((AvgRt/ThreshHigh - 1) ** 2) >=  IdleCount

      This comparison is done only if the corresponding
      tn3270eRtCollCtlType has average(3) and traps(5) selected."
    DEFVAL { 1 }
    ::= { tn3270eRtCollCtlEntry 7 }

tn3270eRtCollCtlBucketBndry1   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object defines the range of transaction
       response times counted in the Tn3270eRtDataBucket1Rts
       object: those less than or equal to this value."
    DEFVAL { 10 }
    ::= { tn3270eRtCollCtlEntry 8 }

tn3270eRtCollCtlBucketBndry2   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object, together with that of the
      tn3270eRtCollCtlBucketBndry1 object, defines the range
      of transaction response times counted in the
      Tn3270eRtDataBucket2Rts object: those greater than the
      value of the tn3270eRtCollCtlBucketBndry1 object, and
      less than or equal to the value of this object."
    DEFVAL { 20 }
    ::= { tn3270eRtCollCtlEntry 9 }

tn3270eRtCollCtlBucketBndry3   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object, together with that of the
      tn3270eRtCollCtlBucketBndry2 object, defines the range of
      transaction response times counted in the
      Tn3270eRtDataBucket3Rts object:  those greater than the
      value of the tn3270eRtCollCtlBucketBndry2 object, and less
      than or equal to the value of this object."
    DEFVAL { 50 }
    ::= { tn3270eRtCollCtlEntry 10 }

tn3270eRtCollCtlBucketBndry4   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object, together with that of the
      tn3270eRtCollCtlBucketBndry3 object, defines the range
      of transaction response times counted in the
      Tn3270eRtDataBucket4Rts object: those greater than the
      value of the tn3270eRtCollCtlBucketBndry3 object, and
      less than or equal to the value of this object.

      The value of this object also defines the range of