dot12-rptr-mib

很不错java的SNMP应用例子

DOT12-RPTR-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        mib-2, Integer32, Counter32, Counter64,
        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
            FROM SNMPv2-SMI
        MacAddress, TruthValue, TimeStamp
            FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
            FROM SNMPv2-CONF;

    vgRptrMIB MODULE-IDENTITY
         LAST-UPDATED "9705192256Z"  -- May 19, 1997
         ORGANIZATION "IETF 100VG-AnyLAN Working Group"
         CONTACT-INFO
                 "WG E-mail: [e-mail]

                      Chair: Jeff Johnson
                     Postal: RedBack Networks
                             2570 North First Street, Suite 410
                             San Jose, CA  95131
                        Tel: [phone]
                        Fax: [phone]
                     E-mail: [e-mail]

                     Editor: John Flick
                     Postal: Hewlett Packard Company
                             8000 Foothills Blvd. M/S 5556
                             Roseville, CA 95747-5556
                        Tel: [phone]
                        Fax: [phone]
                     E-mail: [e-mail]"
         DESCRIPTION
                 "This MIB module describes objects for managing
                 IEEE 802.12 repeaters."
         ::= { mib-2 53 }

    vgRptrObjects      OBJECT IDENTIFIER ::= { vgRptrMIB 1 }
    vgRptrBasic        OBJECT IDENTIFIER ::= { vgRptrObjects 1 }
    vgRptrBasicRptr    OBJECT IDENTIFIER ::= { vgRptrBasic 1 }

    vgRptrInfoTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF VgRptrInfoEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "A table of information about each 802.12 repeater
                in the managed system."
        ::= { vgRptrBasicRptr 1 }

    vgRptrInfoEntry OBJECT-TYPE
        SYNTAX     VgRptrInfoEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "An entry in the table, containing information
                about a single repeater."
        INDEX      { vgRptrInfoIndex }
        ::= { vgRptrInfoTable 1 }

    VgRptrInfoEntry ::=
        SEQUENCE {
            vgRptrInfoIndex                 Integer32,
            vgRptrInfoMACAddress            MacAddress,
            vgRptrInfoCurrentFramingType    INTEGER,
            vgRptrInfoDesiredFramingType    INTEGER,
            vgRptrInfoFramingCapability     INTEGER,
            vgRptrInfoTrainingVersion       INTEGER,
            vgRptrInfoOperStatus            INTEGER,
            vgRptrInfoReset                 INTEGER,
            vgRptrInfoLastChange            TimeStamp
        }

    vgRptrInfoIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..2147483647)
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "A unique identifier for the repeater for which
                this entry contains information.  The numbering
                scheme for repeaters is implementation specific."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.1,
                aRepeaterID."
        ::= { vgRptrInfoEntry 1 }

    vgRptrInfoMACAddress OBJECT-TYPE
        SYNTAX     MacAddress
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The MAC address used by the repeater when it
                initiates training on the uplink port.  Repeaters
                are allowed to train with an assigned MAC address
                or a null (all zeroes) MAC address."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.1,
                aMACAddress."
        ::= { vgRptrInfoEntry 2 }

    vgRptrInfoCurrentFramingType OBJECT-TYPE
        SYNTAX     INTEGER {
                       frameType88023(1),
                       frameType88025(2)
                   }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The type of framing (802.3 or 802.5) currently
                in use by the repeater."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.1,
                aCurrentFramingType."
        ::= { vgRptrInfoEntry 3 }

    vgRptrInfoDesiredFramingType OBJECT-TYPE
        SYNTAX     INTEGER {
                       frameType88023(1),
                       frameType88025(2)
                   }
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                "The type of framing which will be used by the
                repeater after the next time it is reset.

                The value of this object should be preserved
                across repeater resets and power failures."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.1,
                aDesiredFramingType."
        ::= { vgRptrInfoEntry 4 }

    vgRptrInfoFramingCapability OBJECT-TYPE
        SYNTAX     INTEGER {
                       frameType88023(1),
                       frameType88025(2),
                       frameTypeEither(3)
                   }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The type of framing this repeater is capable of
                supporting."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.1,
                aFramingCapability."
        ::= { vgRptrInfoEntry 5 }

    vgRptrInfoTrainingVersion OBJECT-TYPE
        SYNTAX     INTEGER (0..7)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The highest version bits (vvv bits) supported by
                the repeater during training."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.1,
                aRMACVersion."
        ::= { vgRptrInfoEntry 6 }

    vgRptrInfoOperStatus OBJECT-TYPE
        SYNTAX     INTEGER {
                       other(1),
                       ok(2),
                       generalFailure(3)
                   }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The vgRptrInfoOperStatus object indicates the
                operational state of the repeater."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.1,
                aRepeaterHealthState."
        ::= { vgRptrInfoEntry 7 }

    vgRptrInfoReset OBJECT-TYPE
        SYNTAX     INTEGER {
                       noReset(1),
                       reset(2)
                   }

        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                "Setting this object to reset(2) causes the
                repeater to transition to its initial state as
                specified in clause 12 [IEEE Std 802.12].
                Setting this object to noReset(1) has no effect.
                The agent will always return the value noReset(1)
                when this object is read.

                After receiving a request to set this variable to
                reset(2), the agent is allowed to delay the reset
                for a short period.  For example, the implementor
                may choose to delay the reset long enough to
                allow the SNMP response to be transmitted.  In
                any event, the SNMP response must be transmitted.

                This action does not reset the management
                counters defined in this document nor does it
                affect the vgRptrPortAdminStatus parameters.
                Included in this action is the execution of a
                disruptive Self-Test with the following
                characteristics:

                    1) The nature of the tests is not specified.
                    2) The test resets the repeater but without
                       affecting configurable management
                       information about the repeater.
                    3) Packets received during the test may or
                       may not be transferred.
                    4) The test does not interfere with
                       management functions.

                After performing this self-test, the agent will
                update the repeater health information (including
                vgRptrInfoOperStatus), and send a
                vgRptrResetEvent."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.2.2,
                acResetRepeater."
        ::= { vgRptrInfoEntry 8 }

    vgRptrInfoLastChange OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The value of sysUpTime when any of the following
                conditions occurred:

                    1) agent cold- or warm-started;
                    2) this instance of repeater was created
                       (such as when a device or module was
                       added to the system);
                    3) a change in the value of
                       vgRptrInfoOperStatus;
                    4) ports were added or removed as members of
                       the repeater; or
                    5) any of the counters associated with this
                       repeater had a discontinuity."
        ::= { vgRptrInfoEntry 9 }

    vgRptrBasicGroup  OBJECT IDENTIFIER ::= { vgRptrBasic 2 }

    vgRptrBasicGroupTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF VgRptrBasicGroupEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "A table containing information about groups of
                ports."
        ::= { vgRptrBasicGroup 1 }

    vgRptrBasicGroupEntry OBJECT-TYPE
        SYNTAX     VgRptrBasicGroupEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "An entry in the vgRptrBasicGroupTable, containing
                information about a single group of ports."
        INDEX      { vgRptrGroupIndex }
        ::= { vgRptrBasicGroupTable 1 }

    VgRptrBasicGroupEntry ::=
        SEQUENCE {
            vgRptrGroupIndex                Integer32,
            vgRptrGroupObjectID             OBJECT IDENTIFIER,
            vgRptrGroupOperStatus           INTEGER,
            vgRptrGroupPortCapacity         Integer32,
            vgRptrGroupCablesBundled        INTEGER
        }

    vgRptrGroupIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..2146483647)
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "This object identifies the group within the
                system for which this entry contains information.
                The numbering scheme for groups is implementation
                specific."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.4.4.1,
                aGroupID."
        ::= { vgRptrBasicGroupEntry 1 }

    vgRptrGroupObjectID OBJECT-TYPE
        SYNTAX     OBJECT IDENTIFIER
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The vendor's authoritative identification of the
                group.  This value may be allocated within the
                SMI enterprises subtree (1.3.6.1.4.1) and
                provides a straight-forward and unambiguous means
                for determining what kind of group is being
                managed.

                For example, this object could take the value
                1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones,
                Inc.' was assigned the subtree 1.3.6.1.4.1.4242,
                and had assigned the identifier