mpls-ldp-atm-std-mib

很不错java的SNMP应用例子

        with a contiguous range of vci's, or a 'label range'
        for LDP Entities.

        LDP Entities which use ATM must have at least one
        entry in this table.

        There must exist at least one entry in this
        table for every LDP Entity that has
        'mplsLdpEntityOptionalParameters' object with
        a value of 'atmSessionParameters'."
    ::= { mplsLdpEntityAtmObjects 2 }

mplsLdpEntityAtmLREntry OBJECT-TYPE
    SYNTAX MplsLdpEntityAtmLREntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A row in the LDP Entity ATM Label
        Range Table.  One entry in this table contains
        information on a single range of labels
        represented by the configured Upper and Lower
        Bounds VPI/VCI pairs.  These are the same
        data used in the Initialization Message.

        NOTE:  The ranges for a specific LDP Entity
        are UNIQUE and non-overlapping.  For example,
        for a specific LDP Entity index, there could
        be one entry having LowerBound vpi/vci == 0/32, and
        UpperBound vpi/vci == 0/100, and a second entry
        for this same interface with LowerBound
        vpi/vci == 0/101 and UpperBound vpi/vci == 0/200.
        However, there could not be a third entry with
        LowerBound vpi/vci == 0/200 and
        UpperBound vpi/vci == 0/300 because this label
        range overlaps with the second entry (i.e., both
        entries now have 0/200).



        A row will not become active unless a unique and
        non-overlapping range is specified.

        At least one label range entry for a
        specific LDP Entity MUST
        include the default VPI/VCI  values denoted
        in the LDP Entity Table.

        A request to create a row with an overlapping
        range should result in an inconsistentValue
        error."
    INDEX       {  mplsLdpEntityLdpId,
                   mplsLdpEntityIndex,
                   mplsLdpEntityAtmLRMinVpi,
                   mplsLdpEntityAtmLRMinVci
                }
    ::= { mplsLdpEntityAtmLRTable 1 }

MplsLdpEntityAtmLREntry ::= SEQUENCE {
    mplsLdpEntityAtmLRMinVpi       AtmVpIdentifier,
    mplsLdpEntityAtmLRMinVci       MplsAtmVcIdentifier,
    mplsLdpEntityAtmLRMaxVpi       AtmVpIdentifier,
    mplsLdpEntityAtmLRMaxVci       MplsAtmVcIdentifier,
    mplsLdpEntityAtmLRStorageType  StorageType,
    mplsLdpEntityAtmLRRowStatus    RowStatus
}

mplsLdpEntityAtmLRMinVpi OBJECT-TYPE
    SYNTAX AtmVpIdentifier
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The minimum VPI number configured for this range.
        The value of zero is a valid value for the VPI portion
        of the label."
    ::= { mplsLdpEntityAtmLREntry 1 }

mplsLdpEntityAtmLRMinVci OBJECT-TYPE
    SYNTAX MplsAtmVcIdentifier
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The minimum VCI number configured for this range."
    ::= { mplsLdpEntityAtmLREntry 2 }

mplsLdpEntityAtmLRMaxVpi OBJECT-TYPE
    SYNTAX AtmVpIdentifier
    MAX-ACCESS read-create


    STATUS current
    DESCRIPTION
        "The maximum VPI number configured for this range."
    ::= { mplsLdpEntityAtmLREntry 3 }

mplsLdpEntityAtmLRMaxVci OBJECT-TYPE
    SYNTAX MplsAtmVcIdentifier
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The maximum VCI number configured for this range."
   ::= { mplsLdpEntityAtmLREntry 4 }

mplsLdpEntityAtmLRStorageType  OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The storage type for this conceptual row.
        Conceptual rows having the value 'permanent(4)'
        need not allow write-access to any columnar
        objects in the row."
    DEFVAL { nonVolatile }
    ::= { mplsLdpEntityAtmLREntry 5 }

mplsLdpEntityAtmLRRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The status of this conceptual row.  All writable
         objects in this row may be modified at any time,
         however, as described in detail in the section
         entitled, 'Changing Values After Session
         Establishment', and again described in the
         DESCRIPTION clause of the
         mplsLdpEntityAdminStatus object,
         if a session has been initiated with a Peer,
         changing objects in this table will
         wreak havoc with the session and interrupt traffic.
         To repeat again:  the recommended procedure
         is to set the mplsLdpEntityAdminStatus to
         down, thereby explicitly causing a session
         to be torn down. Then, change objects in this
         entry, then set the mplsLdpEntityAdminStatus
         to enable which enables a new session
         to be initiated."
    ::= { mplsLdpEntityAtmLREntry 6 }


--
-- MPLS LDP ATM Session Information
--

mplsLdpAtmSessionObjects OBJECT IDENTIFIER ::=
                               { mplsLdpAtmObjects 2 }

mplsLdpAtmSessionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MplsLdpAtmSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table which relates sessions in the
        'mplsLdpSessionTable' and their label
        range intersections.  There could be one
        or more label range intersections between an
        LDP Entity and LDP Peer using ATM as the
        underlying  media.  Each row represents
        a single label range intersection.

        This table cannot use the 'AUGMENTS'
        clause because there is not necessarily
        a one-to-one mapping between this table
        and the mplsLdpSessionTable."
    ::= { mplsLdpAtmSessionObjects 1 }

mplsLdpAtmSessionEntry OBJECT-TYPE
    SYNTAX      MplsLdpAtmSessionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in this table represents information on a
        single label range intersection between an LDP Entity
        and LDP Peer.

        The information contained in a row is read-only."
    INDEX       { mplsLdpEntityLdpId,
                  mplsLdpEntityIndex,
                  mplsLdpPeerLdpId,
                  mplsLdpSessionAtmLRLowerBoundVpi,
                  mplsLdpSessionAtmLRLowerBoundVci
                }
    ::= { mplsLdpAtmSessionTable 1 }

MplsLdpAtmSessionEntry ::= SEQUENCE {
    mplsLdpSessionAtmLRLowerBoundVpi     AtmVpIdentifier,
    mplsLdpSessionAtmLRLowerBoundVci     MplsAtmVcIdentifier,
    mplsLdpSessionAtmLRUpperBoundVpi     AtmVpIdentifier,


    mplsLdpSessionAtmLRUpperBoundVci     MplsAtmVcIdentifier
}

mplsLdpSessionAtmLRLowerBoundVpi OBJECT-TYPE
    SYNTAX AtmVpIdentifier
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The minimum VPI number for this range."
    ::= { mplsLdpAtmSessionEntry 1 }

mplsLdpSessionAtmLRLowerBoundVci OBJECT-TYPE
    SYNTAX MplsAtmVcIdentifier
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The minimum VCI number for this range."
    ::= { mplsLdpAtmSessionEntry 2 }

mplsLdpSessionAtmLRUpperBoundVpi OBJECT-TYPE
    SYNTAX AtmVpIdentifier
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum VPI number for this range."
    ::= { mplsLdpAtmSessionEntry 3 }

mplsLdpSessionAtmLRUpperBoundVci OBJECT-TYPE
    SYNTAX MplsAtmVcIdentifier
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum VCI number for this range."
    ::= { mplsLdpAtmSessionEntry 4 }

--**************************************************************
-- Module Conformance Statement
--**************************************************************

mplsLdpAtmGroups
    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 1 }

mplsLdpAtmCompliances
    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 2 }

--
-- Full Compliance
--


mplsLdpAtmModuleFullCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The Module is implemented with support for
        read-create and read-write.  In other words,
        both monitoring and configuration
        are available when using this MODULE-COMPLIANCE."
    MODULE -- this module
    MANDATORY-GROUPS    {
                           mplsLdpAtmGroup
                        }


    OBJECT       mplsLdpEntityAtmRowStatus
    SYNTAX       RowStatus { active(1) }
    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
    DESCRIPTION
       "Support for createAndWait and notInService is not required."

    OBJECT       mplsLdpEntityAtmLRRowStatus
    SYNTAX       RowStatus { active(1) }
    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
    DESCRIPTION
       "Support for createAndWait and notInService is not required."

    ::= { mplsLdpAtmCompliances 1 }

--
-- Read-Only Compliance
--

mplsLdpAtmModuleReadOnlyCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The Module is implemented with support for
        read-only.  In other words, only monitoring
        is available by implementing this MODULE-COMPLIANCE."
    MODULE -- this module
    MANDATORY-GROUPS    {
                           mplsLdpAtmGroup
                        }

    OBJECT       mplsLdpEntityAtmIfIndexOrZero
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmMergeCap


    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmVcDirectionality
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmLsrConnectivity
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmDefaultControlVpi
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmDefaultControlVci
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmUnlabTrafVpi
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmUnlabTrafVci
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmStorageType
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmRowStatus
    SYNTAX       RowStatus { active(1) }
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required, and active is the
       only status that needs to be supported."

    OBJECT       mplsLdpEntityAtmLRMaxVpi
    MIN-ACCESS   read-only


    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmLRMaxVci
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmLRStorageType
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required."

    OBJECT       mplsLdpEntityAtmLRRowStatus
    SYNTAX       RowStatus { active(1) }
    MIN-ACCESS   read-only
    DESCRIPTION
       "Write access is not required, and active is the
       only status that needs to be supported."

    ::= { mplsLdpAtmCompliances 2 }

--
-- units of conformance
--

mplsLdpAtmGroup OBJECT-GROUP
    OBJECTS {
    mplsLdpEntityAtmIfIndexOrZero,
    mplsLdpEntityAtmMergeCap,
    mplsLdpEntityAtmLRComponents,
    mplsLdpEntityAtmVcDirectionality,
    mplsLdpEntityAtmLsrConnectivity,
    mplsLdpEntityAtmDefaultControlVpi,
    mplsLdpEntityAtmDefaultControlVci,
    mplsLdpEntityAtmUnlabTrafVpi,
    mplsLdpEntityAtmUnlabTrafVci,
    mplsLdpEntityAtmStorageType,
    mplsLdpEntityAtmRowStatus,
    mplsLdpEntityAtmLRMaxVpi,
    mplsLdpEntityAtmLRMaxVci,
    mplsLdpEntityAtmLRStorageType,
    mplsLdpEntityAtmLRRowStatus,
    mplsLdpSessionAtmLRUpperBoundVpi,
    mplsLdpSessionAtmLRUpperBoundVci

    }
    STATUS    current


    DESCRIPTION
        "Objects that apply to all MPLS LDP implementations
        using ATM as the Layer 2."
    ::= { mplsLdpAtmGroups 1 }

END