ipoa-mib

很不错java的SNMP应用例子

        the ifIndex and IP Address can be determined as
        well (refer to the ipoaVcTable)."
    ::= { ipoaTrapPrefix 1 }

ipoaDuplicateIpAddress NOTIFICATION-TYPE
    OBJECTS {
        ipNetToMediaIfIndex,
        ipNetToMediaNetAddress,
        ipNetToMediaPhysAddress,
        ipNetToMediaPhysAddress
    }
    STATUS  current
    DESCRIPTION
        "The ATMARP Server has detected more than one ATM end
        point attempting to associate the same IP address with
        different ATM addresses."
    ::= { ipoaTrapPrefix 2 }

ipoaLisCreate NOTIFICATION-TYPE
    OBJECTS {
        ipoaLisSubnetAddr
    }
    STATUS  current
    DESCRIPTION
        "Generation of this trap occurs when an ipoaLisEntry is
        created while the ipoaLisTrapEnable.0 object has the
        value enabled(1)."
    ::= { ipoaTrapPrefix 3 }

ipoaLisDelete NOTIFICATION-TYPE
    OBJECTS {
        ipoaLisSubnetAddr
    }
    STATUS  current
    DESCRIPTION
        "Generation of this trap occurs when an ipoaLisEntry is
        deleted while the ipoaLisTrapEnable.0 object has the
        value enabled(1)."
    ::= { ipoaTrapPrefix 4 }

-- Conformance Definitions

ipoaGroups      OBJECT IDENTIFIER ::= { ipoaConformance 1 }

ipoaCompliances OBJECT IDENTIFIER ::= { ipoaConformance 2 }

-- compliance statements

ipoaCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for agents that support the
        IPOA-MIB."
    MODULE -- this module
        MANDATORY-GROUPS { ipoaGeneralGroup,
                           ipoaBasicNotificationsGroup
              }
        GROUP ipoaClientGroup
        DESCRIPTION
            "This group is mandatory for all hosts where IP
            over ATM client support is present."
        GROUP ipoaSrvrGroup
        DESCRIPTION
            "This group is mandatory for all hosts where ATMARP
            Servers are present."
        GROUP ipoaSrvrNotificationsGroup
        DESCRIPTION
            "This group is mandatory for all hosts where ATMARP
            Servers are present."
        GROUP ipoaLisNotificationsGroup
        DESCRIPTION
            "This group is mandatory for all hosts where
            ATMARP client only support is present and
            ipoaLisTrapEnable is allowed to be set to
            enabled(1)."
        GROUP ipoaLisTableGroup
        DESCRIPTION
            "This group is mandatory for all entities which
            support IP over ATM SVCs.  Support of objects in
            this group by IP over ATM clients which only
            support IP over ATM PVCs is optional."

        OBJECT ipoaLisDefaultMtu
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to allow the user
            to change the default MTU from the value 9180.

            The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisDefaultEncapsType
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to allow the user to
            specify the default encapsulation type for the
            LIS.

            The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisInactivityTimer
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisMinHoldingTime
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisQDepth
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisMaxCalls
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisCacheEntryAge
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisRetries
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to allow the user
            to change the default number of times an ATMARP
            request will be retried when no response is
            received from the default of 2.

            The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisTimeout
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to allow the user
            to change the default retransmission time from
            the default of 10 seconds.

            The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisDefaultPeakCellRate
        MIN-ACCESS  read-only
        DESCRIPTION
            "Implementations that do not support IP over
            ATM SVC usage are not required to allow the
            user to specify a best effort default peak cell
            rate since typically the ipoaLisTable won't
            exist.

            The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisIfMappingRowStatus
        SYNTAX   INTEGER {
                           active(1) -- subset of RowStatus
                         }
        MIN-ACCESS read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object, and only one
            of the six enumerated values for the
            RowStatus textual convention need be
            supported, specifically: active(1)."

        OBJECT ipoaArpClientAtmAddr
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaArpSrvrLis
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaArpRemoteSrvrAdminStatus
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security.  In this case the value of
            this object should be up(1) when a VC
            exists to the Remote ATMARP Server or
            otherwise down(2), and the agent should not
            allow a SET operation to this object."

        OBJECT ipoaConfigPvcDefaultMtu
        MIN-ACCESS  read-only
        DESCRIPTION
            "The agent is not required to support a SET
            operation to this object in the absence of
            adequate security."

        OBJECT ipoaLisRowStatus
        SYNTAX   INTEGER {
                           active(1) -- subset of RowStatus
                         }
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required, and only one
            of the six enumerated values for the
            RowStatus textual convention need be
            supported, specifically: active(1)."

        OBJECT ipoaArpClientRowStatus
        SYNTAX   INTEGER {
                           active(1) -- subset of RowStatus
                         }
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required, and only one
            of the six enumerated values for the
            RowStatus textual convention need be
            supported, specifically: active(1)."

        OBJECT ipoaArpRemoteSrvrRowStatus
        SYNTAX   INTEGER {
                           active(1) -- subset of RowStatus
                         }
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required, and only one
            of the six enumerated values for the
            RowStatus textual convention need be
            supported, specifically: active(1)."
        OBJECT ipoaArpSrvrRowStatus
        SYNTAX   INTEGER {
                           active(1) -- subset of RowStatus
                         }
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required, and only one
            of the six enumerated values for the
            RowStatus textual convention need be
            supported, specifically: active(1)."

        OBJECT ipoaConfigPvcRowStatus
        SYNTAX   INTEGER {
                           active(1) -- subset of RowStatus
                         }
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required, and only one
            of the six enumerated values for the
            RowStatus textual convention need be
            supported, specifically: active(1)."

        OBJECT ipoaArpClientArpOutNaks
        MIN-ACCESS  not-accessible
        DESCRIPTION
            "Classic IP and ARP over ATM does not require
            an ATMARP client to transmit an ATMARP_NAK
            upon receipt of an ATMARP request from another
            ATMARP client.  This object should be
            implemented when an ATMARP client supports the
            transmission of ATMARP_NAKs."

    ::= { ipoaCompliances 1 }

-- units of conformance

ipoaGeneralGroup OBJECT-GROUP
    OBJECTS {
        ipoaVcType,
        ipoaVcNegotiatedEncapsType,
        ipoaVcNegotiatedMtu,
        ipoaConfigPvcDefaultMtu,
        ipoaConfigPvcRowStatus
    }
    STATUS  current
    DESCRIPTION
        "This group is mandatory for all IP over ATM entities."
    ::= { ipoaGroups 1 }

ipoaClientGroup OBJECT-GROUP
    OBJECTS {
        ipoaArpClientAtmAddr,
        ipoaArpClientSrvrInUse,
        ipoaArpClientInArpInReqs,
        ipoaArpClientInArpOutReqs,
        ipoaArpClientInArpInReplies,
        ipoaArpClientInArpOutReplies,
        ipoaArpClientInArpInvalidInReqs,
        ipoaArpClientInArpInvalidOutReqs,
        ipoaArpClientArpInReqs,
        ipoaArpClientArpOutReqs,
        ipoaArpClientArpInReplies,
        ipoaArpClientArpOutReplies,
        ipoaArpClientArpInNaks,
        ipoaArpClientArpOutNaks,
        ipoaArpClientArpUnknownOps,
        ipoaArpClientArpNoSrvrResps,
        ipoaArpClientRowStatus
      }
    STATUS  current
    DESCRIPTION
        "This group is mandatory for all hosts where an IP
        over ATM client is present."
    ::= { ipoaGroups 2 }

ipoaSrvrGroup OBJECT-GROUP
    OBJECTS {
        ipoaArpSrvrLis,
        ipoaArpSrvrInArpInReqs,
        ipoaArpSrvrInArpOutReqs,
        ipoaArpSrvrInArpInReplies,
        ipoaArpSrvrInArpOutReplies,
        ipoaArpSrvrInArpInvalidInReqs,
        ipoaArpSrvrInArpInvalidOutReqs,
        ipoaArpSrvrArpInReqs,
        ipoaArpSrvrArpOutReplies,
        ipoaArpSrvrArpOutNaks,
        ipoaArpSrvrArpDupIpAddrs,
        ipoaArpSrvrArpUnknownOps,
        ipoaArpSrvrRowStatus
     }
    STATUS  current
    DESCRIPTION
        "This group is mandatory for all hosts where ATMARP
        Servers are present."
    ::= { ipoaGroups 3 }

ipoaBasicNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
          ipoaMtuExceeded
       }
    STATUS        current
    DESCRIPTION
        "The notification which an IP over ATM entity
        is required to implement."
    ::= { ipoaGroups 4 }

ipoaSrvrNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
          ipoaDuplicateIpAddress
       }
    STATUS        current
    DESCRIPTION
            "The notification which an IP over ATM ATMARP
            Server is required to implement."
    ::= { ipoaGroups 5 }

ipoaLisNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
          ipoaLisCreate,
          ipoaLisDelete
       }
    STATUS        current
    DESCRIPTION
            "The LIS-related notifications which are required
            to be implemented by an IP over ATM ATMARP server,
            as well as by any IP over ATM client which allows
            ipoaLisTrapEnable to be set to enabled(1)."
    ::= { ipoaGroups 6 }

ipoaLisTableGroup OBJECT-GROUP
    OBJECTS {
        ipoaLisTrapEnable,
        ipoaLisSubnetAddr,
        ipoaLisDefaultMtu,
        ipoaLisDefaultEncapsType,
        ipoaLisInactivityTimer,
        ipoaLisMinHoldingTime,
        ipoaLisQDepth,
        ipoaLisMaxCalls,
        ipoaLisCacheEntryAge,
        ipoaLisRetries,
        ipoaLisTimeout,
        ipoaLisDefaultPeakCellRate,
        ipoaLisActiveVcs,
        ipoaLisRowStatus,
        ipoaLisIfMappingRowStatus,
        ipoaArpRemoteSrvrRowStatus,
        ipoaArpRemoteSrvrIpAddr,
        ipoaArpRemoteSrvrAdminStatus,
        ipoaArpRemoteSrvrOperStatus
    }
    STATUS  current
    DESCRIPTION
        "This group is mandatory for all entities which
        support IP over ATM SVCs.  Support of objects in
        this group by IP over ATM clients which only
        support IP over ATM PVCs is optional."
    ::= { ipoaGroups 7 }

END