ipoa-mib

很不错java的SNMP应用例子

         ATMARP Server."
    ::= { ipoaArpSrvrEntry 11 }

ipoaArpSrvrArpDupIpAddrs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times that a duplicate IP address was
         detected by this ATMARP Server."
    ::= { ipoaArpSrvrEntry 12 }

ipoaArpSrvrArpUnknownOps OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times that this ATMARP Server received
         an ATMARP message with an operation code for which it
         is not coded to support."
    ::= { ipoaArpSrvrEntry 13 }

ipoaArpSrvrRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object allows entries to be created and deleted
        from the ipoaArpSrvrTable."
    REFERENCE
        "RFC 1903, 'Textual Conventions for Version 2 of the
        Simple Network Management Protocol (SNMPv2).'"
    ::= { ipoaArpSrvrEntry 14 }

-- The Remote ATMARP Server Table

ipoaArpRemoteSrvrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpoaArpRemoteSrvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of non-local ATMARP Servers associated with a
        LIS.  An entry in this table has three indexes: first
        the ipoaLisSubnetAddr of the LIS for which the
        corresponding ATMARP Server provides ATMARP services,
        then the ipoaArpRemoteSrvrAtmAddr, which is the ATM
        address of the remote ATMARP Server, and finally the
        ifIndex of the interface on which the VC to the ATMARP
        Remote Server will be opened.  An ifIndex value of 0
        should be used when a single VC is to be shared for
        ATMARP purposes by multiple interfaces."
    ::= { ipoaObjects 6 }

ipoaArpRemoteSrvrEntry OBJECT-TYPE
    SYNTAX      IpoaArpRemoteSrvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about one non-local ATMARP Server."
    INDEX  { ipoaLisSubnetAddr, ipoaArpRemoteSrvrAtmAddr,
             ipoaArpRemoteSrvrIfIndex }
    ::= { ipoaArpRemoteSrvrTable 1 }

IpoaArpRemoteSrvrEntry ::= SEQUENCE {
    ipoaArpRemoteSrvrAtmAddr      IpoaAtmAddr,
    ipoaArpRemoteSrvrRowStatus    RowStatus,
    ipoaArpRemoteSrvrIfIndex      InterfaceIndexOrZero,
    ipoaArpRemoteSrvrIpAddr       IpAddress,
    ipoaArpRemoteSrvrAdminStatus  INTEGER,
    ipoaArpRemoteSrvrOperStatus   INTEGER
}

ipoaArpRemoteSrvrAtmAddr OBJECT-TYPE
    SYNTAX      IpoaAtmAddr
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ATM address of the remote ATMARP Server."
    ::= { ipoaArpRemoteSrvrEntry 1 }

ipoaArpRemoteSrvrRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object allows entries to be created and deleted
        from the ipoaArpRemoteSrvrTable.

        Deleting an ipoaArpRemoteSrvrEntry (by setting this
        object to destroy(6)) may affect ipoaArpClientTable
        entries.  The object ipoaArpClientSrvrInUse in an
        ipoaArpClientSrvrEntry may contain the ATM address
        of an ATMARP Remote Server whose entry in the
        ipoaArpRemoteSrvrTable is being removed.  In this
        case, any corresponding ipoaArpClientSrvrInUse
        objects should be at a minimum invalidated by
        setting their values to that of a zero length
        OCTET STRING.

        The value of ipoaArpRemoteSrvrOperStatus should be
        consistent with that of ipoaArpRemoteSrvrRowStatus.
        For example, successfully setting the value of
        this object to notInService(2) after its being in
        the up(1) state should result in
        ipoaArpRemoteSrvrOperStatus being set to down(2)
        if currently up(1)."
    REFERENCE
        "RFC 1903, 'Textual Conventions for Version 2 of the
        Simple Network Management Protocol (SNMPv2).'"
    ::= { ipoaArpRemoteSrvrEntry 2 }

ipoaArpRemoteSrvrIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ifIndex of the interface that the VC to the
         Remote ATMARP Server is associated with."
    ::= { ipoaArpRemoteSrvrEntry 3 }

ipoaArpRemoteSrvrIpAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP Address of the Remote ATMARP Server.  A
        value of 0.0.0.0 implies that this address isn't
        known."
    DEFVAL { '00000000'H }
    ::= { ipoaArpRemoteSrvrEntry 4 }

ipoaArpRemoteSrvrAdminStatus OBJECT-TYPE
    SYNTAX  INTEGER {
              up(1),  -- use this ATMARP Server
              down(2) -- stop using this ATMARP Server
            }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The desired state for use of the ATMARP Server
         represented by an entry in this table.
         ipoaArpRemoteSrvrAdminStatus values:

         up(1)   - Attempt to activate use of the
                   ATMARP Server represented by this
                   entry in the ipoaArpRemoteSrvrTable.
         down(2) - Deactivate use of this ATMARP
                   Server.

         When a managed system creates an entry in this
         table ipoaArpRemoteSrvrAdminStatus and
         ipoaArpRemoteSrvrOperStatus are initialized as
         down(2) by default."
    DEFVAL { down }
    ::= { ipoaArpRemoteSrvrEntry 5 }

ipoaArpRemoteSrvrOperStatus OBJECT-TYPE
    SYNTAX  INTEGER {
               up(1),  -- eligible for use
               down(2) -- not eligible for use
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The current operational state for use of a Remote
         ATMARP Server.  An up(1) entry has a VC
         established to the respective Remote ATMARP
         Server:

         up(1)  - A VC exists to Remote ATMARP Server
                  whose IP Address is stored in
                  ipoaArpRemoteSrvrIpAddr.  This VC can
                  be determined by searching the
                  ipoaVcTable using
                  ipoaArpRemoteSrvrIfIndex (if not 0,
                  otherwise ignore ipNetToMediaIfIndex
                  index) and ipoaArpRemoteSrvrIpAddr.
                  An ipoaArpClientEntry should exist
                  with its ipoaArpClientSrvrInUse
                  object having the same value as
                  ipoaArpRemoteSrvrAtmAddr.
        down(2) - Entry exists without an active VC to
                  the Remote ATMARP Server.

        Transition from up(1) to down(2)
        status may affect ipoaArpClientTable entries.
        The object ipoaArpClientSrvrInUse in an
        ipoaArpClientSrvrEntry may contain the ATM address
        of an ATMARP Remote Server whose entry in the
        ipoaArpRemoteSrvrTable is being deactivated.  In
        this case, any corresponding ipoaArpClientSrvrInUse
        objects should be at a minimum invalidated by
        setting their values to that of a zero length
        OCTET STRING.

        If ipoaArpRemoteSrvrAdminStatus is down(2) then
        ipoaArpRemoteSrvrOperStatus should be down(2).
        If ipoaArpRemoteSrvrAdminStatus is changed to
        up(1) then ipoaArpRemoteSrvrOperStatus should
        change to up(1) if the Remote ATMARP Server
        entry can be activated."
    DEFVAL { down }
    ::= { ipoaArpRemoteSrvrEntry 6 }

-- The ATM VC Table

ipoaVcTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpoaVcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A system that supports IP over ATM is an IP system and
        therefore MUST support all of the appropriate tables in
        the SNMPv2-MIB (RFC 1907), the IF-MIB (RFC 2233),
        the IP-MIB (RFC 2011), the TCP-MIB (RFC 2012), and
        the UDP-MIB (RFC 2013).  This includes the
        ipNetToMediaTable (the ARP cache) that is defined
        within the IP-MIB (RFC 2011).  The ipoaVcTable
        keeps a set of VCs for each entry in the ARP cache
        that was put there by an IP over ATM system acting
        as either a host or server.  The ipoaVcTable doesn't
        augment the ipNetToMediaTable (ARP Cache) since the
        the correspondence between tables is not necessarily
        one-to-one.

        An ipNetToMediaPhysAddress object should contain the
        content as defined by the IpoaAtmAddr textual
        convention when used to hold an IPOA-MIB ATM Address."
    ::= { ipoaObjects 7 }

ipoaVcEntry OBJECT-TYPE
    SYNTAX      IpoaVcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A VC (permanent or switched) that this host or server
        has opened with another member of a LIS.  Additional
        information can be determined about the VC from the
        ATM-MIB.

        Entries in this table cannot be created by management
        applications.

        In an SVC environment, an entry is automatically added
        by the system as the result of ATMARP processing.

        In a PVC environment, an entry is automatically added
        to this table when an entry is created in the
        ipoaConfigPvcTable and the IP Address at the remote
        end of the PVC is discovered using InATMARP.  An
        entry also is added to the ipNetToMediaTable."
    INDEX       { ipNetToMediaIfIndex,
                  ipNetToMediaNetAddress,
                  ipoaVcVpi,
                  ipoaVcVci
                }
    ::= { ipoaVcTable 1 }


IpoaVcEntry ::= SEQUENCE {
    ipoaVcVpi                  IpoaVpiInteger,
    ipoaVcVci                  IpoaVciInteger,
    ipoaVcType                 IpoaAtmConnKind,
    ipoaVcNegotiatedEncapsType IpoaEncapsType,
    ipoaVcNegotiatedMtu        Integer32 }

ipoaVcVpi OBJECT-TYPE
    SYNTAX      IpoaVpiInteger
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VPI value for the Virtual Circuit."
    ::= { ipoaVcEntry 1 }

ipoaVcVci OBJECT-TYPE
    SYNTAX      IpoaVciInteger
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VCI value for the Virtual Circuit."
    ::= { ipoaVcEntry 2 }

ipoaVcType OBJECT-TYPE
    SYNTAX      IpoaAtmConnKind
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The type of the Virtual Circuit."
    ::= { ipoaVcEntry 3 }

ipoaVcNegotiatedEncapsType OBJECT-TYPE
    SYNTAX      IpoaEncapsType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The encapsulation type used when communicating over
        this circuit."
    ::= { ipoaVcEntry 4 }

ipoaVcNegotiatedMtu OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MTU used when communicating over this circuit."
    ::= { ipoaVcEntry 5 }

-- The ATM Config PVC Table

ipoaConfigPvcTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpoaConfigPvcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table MUST be supported when PVCs are intended to
        be supported in order to enable the setup of PVCs for
        use by IP."
    ::= { ipoaObjects 8 }

ipoaConfigPvcEntry OBJECT-TYPE
    SYNTAX      IpoaConfigPvcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a single PVC that exists at this host for
        use by IP."
    INDEX       { ipoaConfigPvcIfIndex,
                  ipoaConfigPvcVpi,
                  ipoaConfigPvcVci
                }
    ::= { ipoaConfigPvcTable 1 }

IpoaConfigPvcEntry ::= SEQUENCE {
    ipoaConfigPvcIfIndex              InterfaceIndex,
    ipoaConfigPvcVpi                  IpoaVpiInteger,
    ipoaConfigPvcVci                  IpoaVciInteger,
    ipoaConfigPvcDefaultMtu           Integer32,
    ipoaConfigPvcRowStatus            RowStatus }

ipoaConfigPvcIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ifIndex of the ATM Interface that this PVC
         is associated with."
    ::= { ipoaConfigPvcEntry 1 }

ipoaConfigPvcVpi OBJECT-TYPE
    SYNTAX      IpoaVpiInteger
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VPI value for the Virtual Circuit."
    ::= { ipoaConfigPvcEntry 2 }

ipoaConfigPvcVci OBJECT-TYPE
    SYNTAX      IpoaVciInteger
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VCI value for the Virtual Circuit."
    ::= { ipoaConfigPvcEntry 3 }

ipoaConfigPvcDefaultMtu OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "Classical IP and ARP over ATM allows use of
       other MTU values for PVCs but considers how a
       value other than 9180 could be selected to be out
       of scope.  ipoaConfigPvcDefaultMtu can be used to
       configure the MTU to be used for the PVC.
       Both ends MUST have the same value configured."
    DEFVAL { 9180 }
    ::= { ipoaConfigPvcEntry 4 }

ipoaConfigPvcRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object allows rows to be created and deleted in
       the ipoaConfigPvcTable.  Creation of an entry in this
       table should eventually result in the creation of an
       ipNetToMediaEntry and a corresponding ipoaVcEntry
       after InATMARP has determined the destination address
       of the remote system that the PVC is connected to.
       Setting this object to destroy(6) should remove the
       corresponding ipNetToMediaTable and ipoaVcTable
       entries."
   REFERENCE
       "RFC 1903, 'Textual Conventions for Version 2 of the
       Simple Network Management Protocol (SNMPv2).'"
   ::= { ipoaConfigPvcEntry 5 }


-- Notifications

ipoaTrapPrefix  OBJECT IDENTIFIER ::= { ipoaNotifications 0 }

ipoaMtuExceeded NOTIFICATION-TYPE
    OBJECTS {
        ipoaVcNegotiatedMtu
    }
    STATUS  current
    DESCRIPTION
        "A frame was received that exceeds the negotiated
        MTU size.  The VPI and VCI of the VC for which this
        condition was detected can be determined from the
        index values for ipoaVcNegotiatedMtu.  In addition,