ipoa-mib

很不错java的SNMP应用例子

    INDEX  { ipoaLisSubnetAddr, ipoaLisIfMappingIfIndex }
    ::= { ipoaLisIfMappingTable 1 }

IpoaLisIfMappingEntry ::= SEQUENCE {
    ipoaLisIfMappingIfIndex   InterfaceIndex,
    ipoaLisIfMappingRowStatus RowStatus
}

ipoaLisIfMappingIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ipAdEntIfIndex object from an ipAddrEntry
         is used as an index to this table when its
         ipAdEntAddr is in the subnet implied by
         ipoaLisSubnetAddr."
    ::= { ipoaLisIfMappingEntry 1 }

ipoaLisIfMappingRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object allows entries to be created and deleted
        in the ipoaLisIfMappingTable."
    REFERENCE
        "RFC 1903, 'Textual Conventions for Version 2 of the
        Simple Network Management Protocol (SNMPv2).'"
    ::= { ipoaLisIfMappingEntry 2 }

-- The ATMARP Client Table

ipoaArpClientTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpoaArpClientEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ATMARP clients running on this system."
    ::= { ipoaObjects 4 }

ipoaArpClientEntry OBJECT-TYPE
    SYNTAX      IpoaArpClientEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a single ATMARP Client.  Clients
        can be started and stopped by adding and removing
        entries from this table.  An entry in the
        ipoaArpClientTable has a corresponding entry in the
        ipAddrTable.  Both are indexed by ipAdEntAddr.
        The ifIndex and subnet mask of a client entry are the
        ipAddrEntry's ipAdEntIfIndex and ipAdEntNetMask,
        respectively.

        Note that adding and removing entries from this table
        may have the same effect on the corresponding
        ipAddrTable entry.  Row creation of an entry in this
        table requires that either the corresponding ipAddrTable
        entry exists or that ipAdEntIfIndex and ipAdEntNetMask
        be specified in the creation of an ipoaArpClientEntry
        at a minimum in order to create the corresponding
        ipAddrEntry.  Specification of ipAdEntBcastAddr and
        ipAdEntReasmMaxSize to complete an ipAddrEntry is
        implementation dependent.
        Whether a corresponding ipAddrEntry is deleted during
        the deletion of an ipoaArpClientEntry is considered
        implementation dependent."
    INDEX       { ipAdEntAddr }
    ::= { ipoaArpClientTable 1 }

IpoaArpClientEntry ::= SEQUENCE {
    ipoaArpClientAtmAddr             IpoaAtmAddr,
    ipoaArpClientSrvrInUse           IpoaAtmAddr,
    ipoaArpClientInArpInReqs         Counter32,
    ipoaArpClientInArpOutReqs        Counter32,
    ipoaArpClientInArpInReplies      Counter32,
    ipoaArpClientInArpOutReplies     Counter32,
    ipoaArpClientInArpInvalidInReqs  Counter32,
    ipoaArpClientInArpInvalidOutReqs Counter32,
    ipoaArpClientArpInReqs           Counter32,
    ipoaArpClientArpOutReqs          Counter32,
    ipoaArpClientArpInReplies        Counter32,
    ipoaArpClientArpOutReplies       Counter32,
    ipoaArpClientArpInNaks           Counter32,
    ipoaArpClientArpOutNaks          Counter32,
    ipoaArpClientArpUnknownOps       Counter32,
    ipoaArpClientArpNoSrvrResps      Counter32,
    ipoaArpClientRowStatus           RowStatus
}

ipoaArpClientAtmAddr OBJECT-TYPE
    SYNTAX      IpoaAtmAddr
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The ATM address of the client."
    ::= { ipoaArpClientEntry 1 }

ipoaArpClientSrvrInUse OBJECT-TYPE
    SYNTAX      IpoaAtmAddr
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ATM address of the ATMARP Server,
        ipoaArpRemoteSrvrAtmAddr, in use by this client.  A
        zero length octet string implies that communication
        with a Remote ATMARP Server is not in effect."
    DEFVAL { ''H }
    ::= { ipoaArpClientEntry 2 }

ipoaArpClientInArpInReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of InATMARP requests received by this
        client."
    ::= { ipoaArpClientEntry 3 }

ipoaArpClientInArpOutReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of InATMARP requests sent by this client."
    ::= { ipoaArpClientEntry 4 }

ipoaArpClientInArpInReplies OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of InATMARP replies received by this
        client."
    ::= { ipoaArpClientEntry 5 }

ipoaArpClientInArpOutReplies OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of InATMARP replies sent by this client."
    ::= { ipoaArpClientEntry 6 }

ipoaArpClientInArpInvalidInReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times that this client detected an
        invalid InATMARP request."
    ::= { ipoaArpClientEntry 7 }

ipoaArpClientInArpInvalidOutReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times that this client did not
        receive an InATMARP reply."
    ::= { ipoaArpClientEntry 8 }

ipoaArpClientArpInReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of ATMARP requests received by this
        client."
    ::= { ipoaArpClientEntry 9 }

ipoaArpClientArpOutReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of ATMARP requests sent by this client."
    ::= { ipoaArpClientEntry 10 }

ipoaArpClientArpInReplies OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of ATMARP replies received by this
        client."
    ::= { ipoaArpClientEntry 11 }

ipoaArpClientArpOutReplies OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of ATMARP replies sent by this client."
    ::= { ipoaArpClientEntry 12 }

ipoaArpClientArpInNaks OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of negative ATMARP replies
         received by this client."
    ::= { ipoaArpClientEntry 13 }

ipoaArpClientArpOutNaks OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of negative ATMARP replies sent by
        this client.

        Classic IP and ARP over ATM does not require an
        ATMARP client to transmit an ATMARP_NAK upon
        receipt of an ATMARP request from another ATMARP
        client.  However, implementation experience has
        shown that this error condition is somewhat easy
        to create inadvertently by configuring one ATMARP
        client with an ipoaArpRemoteSrvrTable entry
        containing an ipoaArpRemoteSrvrAtmAddr value which
        is the ATM address of another ATMARP client-only
        system.

        If an ATMARP client supports the transmission of
        ATMARP_NAKs, then it should increment
        ipoaArpClientArpOutNaks each time it transmits
        an ATMARP_NAK.  Otherwise, support of this
        object is considered optional."
    ::= { ipoaArpClientEntry 14 }

ipoaArpClientArpUnknownOps OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times that this client received
         an ATMARP message with an operation code for which
         it is not coded to support."
    ::= { ipoaArpClientEntry 15 }

ipoaArpClientArpNoSrvrResps OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times this client failed to receive
         a response from a ATMARP Server within the
         ipoaLisTimeout value for ipoaLisRetries times.
         This may imply that the client will re-elect a
         new primary ATMARP Server for this LIS from the
         ipoaArpRemoteSrvrTable."
    ::= { ipoaArpClientEntry 16 }

ipoaArpClientRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object allows entries to be created and
        deleted from the ipoaArpClientTable."
    REFERENCE
        "RFC 1903, 'Textual Conventions for Version 2 of the
        Simple Network Management Protocol (SNMPv2).'"
    ::= { ipoaArpClientEntry 17 }

-- The ATMARP Server Table

ipoaArpSrvrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpoaArpSrvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ATMARP Servers running on this system."
    ::= { ipoaObjects 5 }

ipoaArpSrvrEntry OBJECT-TYPE
    SYNTAX      IpoaArpSrvrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about an ATMARP Server within a LIS.  An
        entry in this table has two indexes: first ipAdEntAddr,
        which is the IP address that this system uses as a
        member of the LIS, and then ipoaArpSrvrAddr, which is
        the ATM address of the ATMARP Server.

        Entries may be created by a management application
        using the ipoaArpSrvrRowStatus object.  Entries in this
        table may also be created by the system and not by a
        management application, for example via ILMI.

        Entries in this table may be deleted by setting the
        ipoaArpSrvrRowStatus object to 'destroy(6)'.  This
        includes entries that were added by the system and not
        by a management application."
    INDEX  { ipAdEntAddr, ipoaArpSrvrAddr }
    ::= { ipoaArpSrvrTable 1 }

IpoaArpSrvrEntry ::= SEQUENCE {
    ipoaArpSrvrAddr                 IpoaAtmAddr,
    ipoaArpSrvrLis                  IpAddress,
    ipoaArpSrvrInArpInReqs          Counter32,
    ipoaArpSrvrInArpOutReqs         Counter32,
    ipoaArpSrvrInArpInReplies       Counter32,
    ipoaArpSrvrInArpOutReplies      Counter32,
    ipoaArpSrvrInArpInvalidInReqs   Counter32,
    ipoaArpSrvrInArpInvalidOutReqs  Counter32,
    ipoaArpSrvrArpInReqs            Counter32,
    ipoaArpSrvrArpOutReplies        Counter32,
    ipoaArpSrvrArpOutNaks           Counter32,
    ipoaArpSrvrArpDupIpAddrs        Counter32,
    ipoaArpSrvrArpUnknownOps        Counter32,
    ipoaArpSrvrRowStatus            RowStatus
}

ipoaArpSrvrAddr OBJECT-TYPE
    SYNTAX      IpoaAtmAddr
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ATM address of the ATMARP Server."
    ::= { ipoaArpSrvrEntry 1 }

ipoaArpSrvrLis OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The subnet address that identifies the LIS with
        which this server is associated."
    ::= { ipoaArpSrvrEntry 2 }

ipoaArpSrvrInArpInReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of InATMARP requests received by this
        ATMARP Server."
    ::= { ipoaArpSrvrEntry 3 }

ipoaArpSrvrInArpOutReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of InATMARP requests sent by this ATMARP
        Server."
    ::= { ipoaArpSrvrEntry 4 }

ipoaArpSrvrInArpInReplies OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of InATMARP replies received by this
        ATMARP Server."
    ::= { ipoaArpSrvrEntry 5 }

ipoaArpSrvrInArpOutReplies OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of InATMARP replies sent by this ATMARP
        Server."
    ::= { ipoaArpSrvrEntry 6 }

ipoaArpSrvrInArpInvalidInReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of invalid InATMARP requests received by
         this ATMARP Server."
    ::= { ipoaArpSrvrEntry 7 }

ipoaArpSrvrInArpInvalidOutReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times that this server did not receive
         an InATMARP reply."
    ::= { ipoaArpSrvrEntry 8 }

ipoaArpSrvrArpInReqs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of ATMARP requests received by this
        ATMARP Server."
    ::= { ipoaArpSrvrEntry 9 }

ipoaArpSrvrArpOutReplies OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of ATMARP replies sent by this ATMARP
        Server."
    ::= { ipoaArpSrvrEntry 10 }

ipoaArpSrvrArpOutNaks OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Total number of negative ATMARP replies sent by this