ipoa-mib

很不错java的SNMP应用例子

IPOA-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    transmission, Integer32, IpAddress, Counter32,
    Gauge32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, RowStatus
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    ipNetToMediaNetAddress, ipNetToMediaIfIndex,
    ipNetToMediaPhysAddress, ipAdEntAddr
        FROM IP-MIB

--  The following textual conventions are defined locally within
--  this MIB module.  They have been prefixed with 'Ipoa' to
--  distinguish them from their counterparts in the ATM-TC-MIB.
--  This was done so that the IPOA-MIB could be advanced as
--  a standards-based MIB without waiting for the ATM-TC-MIB.

--  AtmConnKind, AtmAddr
--      FROM ATM-TC-MIB

    InterfaceIndex, InterfaceIndexOrZero
        FROM IF-MIB
    ;

ipoaMIB MODULE-IDENTITY
    LAST-UPDATED "9802090000Z" -- February 9, 1998
    ORGANIZATION "IETF Internetworking Over NBMA Working
                  Group (ion)"
    CONTACT-INFO
        "Maria Greene ([e-mail])
         Xedia Corp.

         Jim Luciani ([e-mail])
         Bay Networks

         Kenneth White ([e-mail])
         IBM Corp.

         Ted Kuo ([e-mail])
         Bay Networks"
    DESCRIPTION
        "This module defines a portion of the management
        information base (MIB) for managing Classical IP and
        ARP over ATM entities."
    ::= { transmission 46 }

-- Textual Conventions

IpoaEncapsType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The encapsulation type used on a VC."
    SYNTAX      INTEGER {
                    llcSnap(1),
                    vcMuxed(2),
                    other(3)
                }

IpoaVpiInteger ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
        "An integer large enough to contain the value of a VPI."
    SYNTAX     Integer32 (0..255)

IpoaVciInteger ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
        "An integer large enough to contain the value of a VCI."
    SYNTAX     Integer32 (0..65535)

IpoaAtmAddr ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x"
    STATUS  current
    DESCRIPTION
       "The ATM address used by the network entity.
        The semantics are implied by the length.
        The address types are:

        - no address (0 octets)
        - E.164 (8 octets)
        - NSAP (20 octets)

        In addition, when subaddresses are used IpoaAtmAddr
        may represent the concatenation of address and
        subaddress.  The associated address types are:

        - E.164, E.164 (16 octets)
        - E.164, NSAP (28 octets)
        - NSAP, NSAP (40 octets)
        Address lengths other than defined in this definition
        imply address types defined elsewhere.
        Note: The E.164 address is encoded in BCD format."
    SYNTAX   OCTET STRING (SIZE(0..40))

IpoaAtmConnKind ::= TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
       "The use of call control.  The use is as follows:
           pvc(1)
              Virtual link of a PVC.  Should not be
              used in a PVC/SVC (i.e., SPVC)
              crossconnect.
           svcIncoming(2)
              Virtual link established after a
              received signaling request to setup
              an SVC.
           svcOutgoing(3)
              Virtual link established after a
              transmitted or forwarded signaling
              request to setup an SVC.
           spvcInitiator(4)
              Virtual link at the PVC side of an
              SVC/PVC crossconnect, where the
              switch is the initiator of the SPVC
              setup.
           spvcTarget(5)
              Virtual link at the PVC side of an
              SVC/PVC crossconnect, where the
              switch is the target of the SPVC
              setup.

        An spvcInitiator is always cross-connected to
        an svcOutgoing, and an spvcTarget is always
        cross-connected to an svcIncoming."
    SYNTAX   INTEGER {
                      pvc(1),
                      svcIncoming(2),
                      svcOutgoing(3),
                      spvcInitiator(4),
                      spvcTarget(5)
                     }

-- Top-level structure of the MIB

ipoaObjects        OBJECT IDENTIFIER ::= { ipoaMIB 1 }
ipoaNotifications  OBJECT IDENTIFIER ::= { ipoaMIB 2 }
ipoaConformance    OBJECT IDENTIFIER ::= { ipoaMIB 3 }

-- MIB Objects

ipoaLisTrapEnable  OBJECT-TYPE
    SYNTAX      INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Indicates whether ipoaLisCreate and ipoaLisDelete
        traps should be generated by this system.

        By default, this object should have the value
        enabled(1) for systems where ATMARP Servers are
        present and disabled(2) on systems where only
        clients reside."
    ::= { ipoaObjects 1 }

-- The ATM Logical IP Subnet (LIS) Table

ipoaLisTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpoaLisEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "There is one entry in this table for every Logical IP
        Subnet (LIS) of which this system is a member.

        The bulk of the objects in an ipoaLisEntry exists
        to control ATMARP for a particular LIS.  In a PVC only
        environment it is implementation dependent as to
        whether this table should be supported."
    ::= { ipoaObjects 2 }

ipoaLisEntry OBJECT-TYPE
    SYNTAX      IpoaLisEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Information about a single LIS of which this system
        is a member.

        Membership in a LIS is independent of the actual ATM
        interfaces being used.  The ipoaLisTable defines
        all LISs that a system is a member of.  The ipAddrTable
        and the ipoaClientTable provides the mapping from local
        IP address to ATM interface.  The ipoaLisIfMappingTable
        provides the mappings between Logical IP Subnets and
        interfaces.
        The ipoaLisTable is indexed by ipoaLisSubnetAddr (IP
        subnet address).  An entry in the ipoaLisTable should
        exist for each ipAddrEntry that is associated with an
        ATM related interface used for Classical IP and ARP
        over ATM traffic.

        Its ipAdEntAddr and ipAdEntNetMask when ANDed together
        should equal the ipoaLisSubnetAddr of the corresponding
        ipoaLisEntry."
    INDEX       { ipoaLisSubnetAddr }
    ::= { ipoaLisTable 1 }

IpoaLisEntry ::= SEQUENCE {
    ipoaLisSubnetAddr          IpAddress,
    ipoaLisDefaultMtu          Integer32,
    ipoaLisDefaultEncapsType   IpoaEncapsType,
    ipoaLisInactivityTimer     Integer32,
    ipoaLisMinHoldingTime      Integer32,
    ipoaLisQDepth              Integer32,
    ipoaLisMaxCalls            Integer32,
    ipoaLisCacheEntryAge       Integer32,
    ipoaLisRetries             Integer32,
    ipoaLisTimeout             Integer32,
    ipoaLisDefaultPeakCellRate Integer32,
    ipoaLisActiveVcs           Gauge32,
    ipoaLisRowStatus           RowStatus
}

ipoaLisSubnetAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP subnet address associated with this LIS."
    ::= { ipoaLisEntry 1 }

ipoaLisDefaultMtu OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The default MTU used within this LIS.  Note that the
        actual MTU used for a VC between two members of the
        LIS may be negotiated during connection setup and may
        be different than this value.  The ipoaVcNegotiatedMtu
        object indicates the actual MTU in use for a
        particular VC."
    DEFVAL { 9180 }
    ::= { ipoaLisEntry 2 }

ipoaLisDefaultEncapsType OBJECT-TYPE
    SYNTAX      IpoaEncapsType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The default encapsulation to use on VCs created for
        this LIS.  Note that the actual encapsulation type may
        be negotiated during connection setup and may be
        different than this value.  The
        ipoaVcNegotiatedEncapsType object indicates the actual
        encapsulation in use for a particular VC."
    DEFVAL { llcSnap }
    ::= { ipoaLisEntry 3 }

ipoaLisInactivityTimer OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The time, in seconds, before a call established for an
        ipNetToMediaEntry on a client will timeout due to no
        traffic being passed on the VC.  A value of 0 implies
        no time out."
    REFERENCE
        "RFC 1755, Sec. 3.4 VC Teardown"
    DEFVAL      { 1200 }
    ::= { ipoaLisEntry 4 }

ipoaLisMinHoldingTime OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The minimum amount of time, in seconds, that a call
        will remain open.  If 0 then ipoaInactivityTimer will
        completely determine when a call is terminated."
    REFERENCE
        "RFC 1755, Sec. 3.4 VC Teardown"
    DEFVAL      { 60 }
    ::= { ipoaLisEntry 5 }

ipoaLisQDepth OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "packets"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum number of outstanding requests that are
         allowed while waiting for ATMARP replies and
         InATMARP replies for this LIS."
    DEFVAL      { 1 }
    ::= { ipoaLisEntry 6 }

ipoaLisMaxCalls OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The maximum number of SVCs that can be established
        simultaneously for this LIS."
    DEFVAL      { 500 }
    ::= { ipoaLisEntry 7 }

ipoaLisCacheEntryAge OBJECT-TYPE
    SYNTAX      Integer32 (60..1200)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The time, in seconds, before an ipNetToMediaEntry will
        age out of the table.  Note that the default value will
        be different for a client and a server.  An ATMARP
        Server should use a default of 1200 and a client should
        use 900."
    DEFVAL      { 900 }
    ::= { ipoaLisEntry 8 }

ipoaLisRetries OBJECT-TYPE
    SYNTAX      Integer32 (0..10)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The number of times the ATMARP request will be retried
        when no response is received in the timeout interval
        indicated by ipoaLisTimeout."
    DEFVAL      { 2 }
    ::= { ipoaLisEntry 9 }

ipoaLisTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..60)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The time to wait, in seconds, before retransmission
        of an ARP request."
    DEFVAL      { 10 }
    ::= { ipoaLisEntry 10 }

ipoaLisDefaultPeakCellRate OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This object is the signalling parameter that
         should be used when setting up all best effort
         VCCs (Virtual Channel Connections).
         This parameter applies to the forward and
         backward direction on a per best effort VCC basis.
         A value of zero implies that no configured default
         exists and that local policy should be used to
         determine the actual default to used during
         call setup.  ATM Signaling Support for IP over ATM
         (RFC 1755) recommends 1/10th of the ATM interface's
         speed."
    ::= { ipoaLisEntry 11 }

ipoaLisActiveVcs OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of active SVCs for this LIS."
    ::= { ipoaLisEntry 12 }

ipoaLisRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object allows entries to be created and deleted
        in the ipoaLisTable.

        When the ipoaLisRowStatus deleted (by setting this
        object to destroy(6)), this has the side-effect of
        removing all entries from the ipNetToMediaTable that
        are associated with this LIS (in other words, it
        flushes the entity's ATMARP cache).  It also removes
        the ipoaVcTable entries that were associated with those
        ipNetToMediaTable entries.  Destroying the row also
        removes the corresponding entries in the
        ipoaArpSrvrTable, ipoaArpClientTable,
        ipoaLisIfMappingTable, and ipoaArpRemoteSrvrTable.

        Entries in both the ipNetToMediaTable and the
        ipoaVcTable that are associated with a
        ipoaConfigPvcEntry are not affected by changes to
        ipoaLisRowStatus."
    REFERENCE
        "RFC 1903, 'Textual Conventions for Version 2 of the
        Simple Network Management Protocol (SNMPv2).'"
    ::= { ipoaLisEntry 13 }


-- The ATM Logical IP Subnet Interface Mapping Table

ipoaLisIfMappingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpoaLisIfMappingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "There is one entry in this table for every combination
         of ipoaLisEntry and IP over ATM interface."
    ::= { ipoaObjects 3 }

ipoaLisIfMappingEntry OBJECT-TYPE
    SYNTAX      IpoaLisIfMappingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the ipoaLisIfMappingTable."