rfc1243-mib

很不错java的SNMP应用例子

RFC1243-MIB DEFINITIONS ::= BEGIN

IMPORTS
        Counter, IpAddress
                FROM RFC1155-SMI
        DisplayString, mib-2
            FROM RFC1213-MIB
        OBJECT-TYPE
                FROM RFC-1212;

--  This MIB module uses the extended OBJECT-TYPE macro as
--  defined in [9]


--  AppleTalk MIB

        appletalk    OBJECT IDENTIFIER ::= { mib-2 13 }


        DdpAddress ::=  -- 2 octets of net number
                        -- 1 octet of node number
                OCTET STRING (SIZE (3))
        -- This data type is used for encoding a DDP protocol
        -- address.  The format of this address is a serial
        -- encoding of the two octets of network number in
        -- network byte order, followed by the 1 octet node
        -- number.

        llap     OBJECT IDENTIFIER ::= { appletalk 1 }
        aarp     OBJECT IDENTIFIER ::= { appletalk 2 }
        atport   OBJECT IDENTIFIER ::= { appletalk 3 }
        ddp      OBJECT IDENTIFIER ::= { appletalk 4 }
        rtmp     OBJECT IDENTIFIER ::= { appletalk 5 }
        kip      OBJECT IDENTIFIER ::= { appletalk 6 }
        zip      OBJECT IDENTIFIER ::= { appletalk 7 }
        nbp      OBJECT IDENTIFIER ::= { appletalk 8 }
        atecho   OBJECT IDENTIFIER ::= { appletalk 9 }


-- The LLAP Group

llapTable OBJECT-TYPE
        SYNTAX SEQUENCE OF LlapEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "The list of LLAP entries."
        ::= { llap 1 }
llapEntry OBJECT-TYPE
        SYNTAX LlapEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "An LLAP entry containing objects for the
            LocalTalk Link Access Protocol for a particular
            LocalTalk interface."
        INDEX { llapIfIndex }
        ::= { llapTable 1 }

LlapEntry ::= SEQUENCE {
        llapIfIndex             INTEGER,
        llapInPkts              Counter,
        llapOutPkts             Counter,
        llapInNoHandlers        Counter,
        llapInLengthErrors      Counter,
-- FIX: changed 'llapInBads' to 'llapInErrors'
        llapInErrors            Counter,
        llapCollisions          Counter,
        llapDefers              Counter,
        llapNoDataErrors        Counter,
        llapRandomCTSErrors     Counter,
        llapFCSErrors           Counter
}
llapIfIndex OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The LLAP interface to which this entry pertains.
            The interface identified by a particular value of
            this index is the same interface as identified
            by the same value of ifIndex."
        ::= { llapEntry 1 }

llapInPkts OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of good packets received on this
            LocalTalk interface."
        ::= { llapEntry 2 }

llapOutPkts OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of packets transmitted on this
            LocalTalk interface."
        ::= { llapEntry 3 }

llapInNoHandlers OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of good packets received on this
            LocalTalk interface for which there was no
            protocol handler."
        ::= { llapEntry 4 }

llapInLengthErrors OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of packets received on this
            LocalTalk interface whose actual length did not
            match the length in the header."
        ::= { llapEntry 5 }

llapInErrors OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of packets containing errors
            received on this LocalTalk interface."
        ::= { llapEntry 6 }

llapCollisions OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of collisions assumed on this
            LocalTalk interface due to the lack of a lapCTS
            reply."
        ::= { llapEntry 7 }

llapDefers OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of times this LocalTalk
            interface deferred to other packets."
        ::= { llapEntry 8 }

llapNoDataErrors OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of times this LocalTalk
            interface received a lapRTS packet and expected
            a data packet, but did not receive any data
            packet."
        ::= { llapEntry 9 }

llapRandomCTSErrors OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of times this LocalTalk
            interface received a lapCTS packet that was
            not solicited by a lapRTS packet."
        ::= { llapEntry 10 }

llapFCSErrors OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The total number of times this LocalTalk
            interface received a packet with an FCS
            (Frame Check Sequence) error."
        ::= { llapEntry 11 }


-- The AARP Group
aarpTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AarpEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "The AppleTalk Address Translation Table
            contains an equivalence of AppleTalk Network
            Addresses to the link layer physical address."
        ::= { aarp 1 }

aarpEntry OBJECT-TYPE
        SYNTAX AarpEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "Each entry contains one AppleTalk Network
            Address to physical address equivalence."
        INDEX { aarpIfIndex, aarpNetAddress }
        ::= { aarpTable 1 }

AarpEntry ::= SEQUENCE {
        aarpIfIndex     INTEGER,
        aarpPhysAddress OCTET STRING,
        aarpNetAddress  DdpAddress
}

aarpIfIndex OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The interface on which this entry's equivalence
            is effective.  The interface identified by a
            particular value of this index is the same
            interface as identified by the same value of
            ifIndex."
        ::= { aarpEntry 1 }

aarpPhysAddress OBJECT-TYPE
        SYNTAX OCTET STRING
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The media-dependent physical address"
        ::= { aarpEntry 2 }

aarpNetAddress OBJECT-TYPE
        SYNTAX DdpAddress
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The AppleTalk Network Address corresponding to
            the media-dependent physical address."
        ::= { aarpEntry 3 }


-- The ATPort Group

atportTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AtportEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "A list of AppleTalk ports for this entity."
        ::= { atport 1 }

atportEntry OBJECT-TYPE
        SYNTAX AtportEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "The description of one of the AppleTalk
            ports on this entity."
        INDEX { atportIndex }
        ::= { atportTable 1 }

AtportEntry ::= SEQUENCE {
        atportIndex               INTEGER,
        atportDescr               DisplayString,
        atportType                INTEGER,
        atportNetStart            OCTET STRING (SIZE(2)),
        atportNetEnd              OCTET STRING (SIZE(2)),
        atportNetAddress          DdpAddress,
        atportStatus              INTEGER,
        atportNetConfig           INTEGER,
        atportZoneConfig          INTEGER,
        atportZone                OCTET STRING,
        atportIfIndex             INTEGER
}

atportIndex OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "A unique value for each AppleTalk port.
            Its value is between 1 and the total number of
            AppleTalk ports.  The value for each port must
            remain constant at least from the
            re-initialization of the entity's network
            management system to the next
            re-initialization."
        ::= { atportEntry 1 }

atportDescr OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "A text string containing information about the
            port.  This string is intended for presentation
            to a human; it must not contain anything but
            printable ASCII characters."
        ::= { atportEntry 2 }

atportType OBJECT-TYPE
        SYNTAX INTEGER {
             other(1),       -- none of the following
             localtalk(2),
             ethertalk1(3),
             ethertalk2(4),
             tokentalk(5),
             iptalk(6),
             serial-ppp(7),
             serial-nonstandard(8),
             virtual(9)
        }
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "The type of port, distinguished by the protocol
            immediately below DDP in the protocol stack."
        ::= { atportEntry 3 }

atportNetStart OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(2))
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "The first AppleTalk network address in the range
            configured for this port.  This is a two octet
            DDP network address in network byte order."
        ::= { atportEntry 4 }

atportNetEnd OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE(2))
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "The last AppleTalk network address in the range
            configured for this port.  This is a two octet
            DDP network address in network byte order.  If the
            network to which this AppleTalk port is
            connected is a Phase 1 network or a non-extended
            network, the value for atportNetEnd shall be two
            octets of zero."
        ::= { atportEntry 5 }

atportNetAddress OBJECT-TYPE
        SYNTAX DdpAddress
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "The AppleTalk network address configured for this
            port."
        ::= { atportEntry 6 }

atportStatus OBJECT-TYPE
        SYNTAX INTEGER {
             operational(1),
             unconfigured(2),