rfc1381-mib

很不错java的SNMP应用例子

RFC1381-MIB DEFINITIONS ::= BEGIN

IMPORTS
        Counter
                FROM RFC1155-SMI
        transmission
                FROM RFC1213-MIB
        OBJECT-TYPE
                FROM RFC-1212;


                --  LAPB MIB

lapb    OBJECT IDENTIFIER ::= { transmission 16 }

PositiveInteger ::= INTEGER (0..2147483647)

IfIndexType     ::= INTEGER (1..2147483647)
-- IfIndexType specifies an index object for a table
-- with entries that match entries in the MIB-II ifTable.
-- The value of the index for the table will match the
-- ifIndex entry for same interface in the ifTable.
-- The values of this object range from 1 to ifNumber
-- inclusive.


-- ###########################################################
--                      LAPB Admn Table
-- ###########################################################

-- Support of the lapbAdmnTable is mandatory for all
-- agents of systems that implement LAPB.

lapbAdmnTable   OBJECT-TYPE
        SYNTAX  SEQUENCE OF LapbAdmnEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains objects that can be
                changed to manage a LAPB interface.
                Changing one of these parameters may take
                effect in the operating LAPB immediately or
                may wait until the interface is restarted
                depending on the details of the
                implementation.

                Most of the objects in this read-write table
                have corresponding read-only objects in the
                lapbOperTable that return the current
                operating value.

                The operating values may be different from
                these configured values if changed by XID
                negotiation or if a configured parameter was
                changed after the interface was started."
        ::= { lapb 1 }

lapbAdmnEntry   OBJECT-TYPE
        SYNTAX  LapbAdmnEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Configured parameter values for a specific
                LAPB."
        INDEX { lapbAdmnIndex }
        ::= { lapbAdmnTable 1 }

LapbAdmnEntry ::= SEQUENCE {
        lapbAdmnIndex
                IfIndexType,
        lapbAdmnStationType
                INTEGER,
        lapbAdmnControlField
                INTEGER,
        lapbAdmnTransmitN1FrameSize
                PositiveInteger,
        lapbAdmnReceiveN1FrameSize
                PositiveInteger,
        lapbAdmnTransmitKWindowSize
                INTEGER,
        lapbAdmnReceiveKWindowSize
                INTEGER,
        lapbAdmnN2RxmitCount
        INTEGER,
        lapbAdmnT1AckTimer
                PositiveInteger,
        lapbAdmnT2AckDelayTimer
                PositiveInteger,
        lapbAdmnT3DisconnectTimer
                PositiveInteger,
        lapbAdmnT4IdleTimer
                PositiveInteger,
        lapbAdmnActionInitiate
                INTEGER,
        lapbAdmnActionRecvDM
                INTEGER
        }

lapbAdmnIndex   OBJECT-TYPE
        SYNTAX  IfIndexType
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The ifIndex value for the LAPB interface."
        ::= { lapbAdmnEntry 1 }

lapbAdmnStationType     OBJECT-TYPE
        SYNTAX  INTEGER {
                dte (1),
                dce (2),
                dxe (3)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Identifies the desired station type of this
                interface."
        REFERENCE "ISO 7776 section 3.1"
        DEFVAL { dte }
        ::= { lapbAdmnEntry 2 }

lapbAdmnControlField OBJECT-TYPE
        SYNTAX  INTEGER {
                modulo8 (1),
                modulo128 (2)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The desired size of the sequence numbers
                used to number frames."
        REFERENCE "ISO 8885 Table 3, Name: HDLC Option - 10"
        DEFVAL { modulo8 }
        ::= { lapbAdmnEntry 3 }

lapbAdmnTransmitN1FrameSize OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The default maximum N1 frame size desired
                in number of bits for a frame transmitted by
                this DTE.  This excludes flags and 0 bits
                inserted for transparency."
        REFERENCE "ISO 8885 Table 3,
                Name: Information Field length"
        DEFVAL { 36000 } -- 4500 * 8; 802.5 Frame size
        ::= { lapbAdmnEntry 4 }

lapbAdmnReceiveN1FrameSize OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The default maximum N1 frame size desired
                in number of bits for a frame the DCE/remote
                DTE transmits to this DTE.  This excludes
                flags and 0 bits inserted for transparency."
        DEFVAL { 36000  } -- 4500 * 8; 802.5 Frame size
        ::= { lapbAdmnEntry 5 }

lapbAdmnTransmitKWindowSize OBJECT-TYPE
        SYNTAX  INTEGER (1..127)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The default transmit window size for this
                Interface.  This is the maximum number of
                unacknowledged sequenced PDUs that may be
                outstanding from this DTE at any one time."
        REFERENCE "ISO 8885 Table 3, Name: Window size"
        DEFVAL { 7 }
        ::= { lapbAdmnEntry 6 }

lapbAdmnReceiveKWindowSize OBJECT-TYPE
        SYNTAX  INTEGER (1..127)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The default receive window size for this
                Interface.  This is the maximum number of
                unacknowledged sequenced PDUs that may be
                outstanding from the DCE/remote DTE at any
                one time."
        REFERENCE "ISO 8885 Table 3, Name: Window size"
        DEFVAL { 7 }
        ::= { lapbAdmnEntry 7 }

lapbAdmnN2RxmitCount    OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The default N2 retry counter for this
                interface.  This specifies the number of
                times a PDU will be resent after the T1
                timer expires without an acknowledgement for
                the PDU."
        REFERENCE "ISO 8885 Table 3,
                Name: Retransmission Attempts"
        DEFVAL { 20 }
        ::= { lapbAdmnEntry 8 }

lapbAdmnT1AckTimer      OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The default T1 timer for this interface.
                This specifies the maximum time in
                Milliseconds to wait for acknowledgment of a
                PDU."
        REFERENCE "ISO 8885 Table 3, Name:
                Acknowledgement timer"
        DEFVAL { 3000 }
        ::= { lapbAdmnEntry 9 }

lapbAdmnT2AckDelayTimer         OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The default T2 timer for this interface.
                This specifies the maximum time in
                Milliseconds to wait before sending an
                acknowledgment for a sequenced PDU.  A value
                of zero means there will be no delay in
                acknowledgement generation."
        REFERENCE "ISO 8885 Table 3,
                Name: Reply delay timer"
        DEFVAL { 0 }
        ::= { lapbAdmnEntry 10 }

lapbAdmnT3DisconnectTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T3 timer for this interface.  This
                specifies the time in Milliseconds to wait
                before considering the link disconnected.  A
                value of zero indicates the link will be
                considered disconnected upon completion of
                the frame exchange to disconnect the link."
        REFERENCE "ISO 7776 section 5.7.1.3"
        DEFVAL { 60000 }
        ::= { lapbAdmnEntry 11 }

lapbAdmnT4IdleTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T4 timer for this interface.  This
                specifies the maximum time in Milliseconds
                to allow without frames being exchanged on
                the data link.  A value of 2147483647
                indicates no idle timer is being kept."
        REFERENCE "ISO 7776 section 5.7.1.4"
        DEFVAL { 2147483647 }
        ::= { lapbAdmnEntry 12 }

lapbAdmnActionInitiate OBJECT-TYPE
        SYNTAX  INTEGER {
        sendSABM (1),
                sendDISC (2),
                sendDM (3),
                none (4),
                other (5)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This identifies the action LAPB will take
                to initiate link set-up."
        DEFVAL { sendSABM }
        ::= { lapbAdmnEntry 13 }

lapbAdmnActionRecvDM OBJECT-TYPE
        SYNTAX  INTEGER {
                sendSABM (1),
                sendDISC (2),
                other (3)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This identifies the action LAPB will take
                when it receives a DM response."
        DEFVAL { sendSABM }
        ::= { lapbAdmnEntry 14 }


-- ###########################################################
--                      LAPB operating parameters.
-- ###########################################################

-- Support of the lapbOperTable is mandatory for all
-- agents of systems that implement LAPB.

lapbOperTable   OBJECT-TYPE
        SYNTAX  SEQUENCE OF LapbOperEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains configuration
                information about interface parameters
                currently set in the interface.  Many of
                these objects have corresponding objects in
        the lapbAdmnTable."
        ::= { lapb 2 }

lapbOperEntry   OBJECT-TYPE
        SYNTAX  LapbOperEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Currently set parameter values for a
                specific LAPB."
        INDEX { lapbOperIndex }
        ::= { lapbOperTable 1 }

LapbOperEntry ::= SEQUENCE {
        lapbOperIndex
                IfIndexType,
        lapbOperStationType
                INTEGER,
        lapbOperControlField
                INTEGER,
        lapbOperTransmitN1FrameSize
                PositiveInteger,
        lapbOperReceiveN1FrameSize
                PositiveInteger,
        lapbOperTransmitKWindowSize
                INTEGER,
        lapbOperReceiveKWindowSize
                INTEGER,
        lapbOperN2RxmitCount