mpls-lsr-std-mib

很不错java的SNMP应用例子

MplsInSegmentPerfEntry ::= SEQUENCE {
    mplsInSegmentPerfOctets             Counter32,
    mplsInSegmentPerfPackets            Counter32,
    mplsInSegmentPerfErrors             Counter32,
    mplsInSegmentPerfDiscards           Counter32,

    -- high capacity counter
    mplsInSegmentPerfHCOctets           Counter64,

    mplsInSegmentPerfDiscontinuityTime  TimeStamp
   }

mplsInSegmentPerfOctets OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION



       "This value represents the total number of octets
        received by this segment. It MUST be equal to the
        least significant 32 bits of
        mplsInSegmentPerfHCOctets
        if mplsInSegmentPerfHCOctets is supported according to
        the rules spelled out in RFC2863."
   ::= { mplsInSegmentPerfEntry 1 }

mplsInSegmentPerfPackets OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Total number of packets received by this segment."
   ::= { mplsInSegmentPerfEntry 2 }

mplsInSegmentPerfErrors OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The number of errored packets received on this
        segment."
   ::= { mplsInSegmentPerfEntry 3 }

mplsInSegmentPerfDiscards OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The number of labeled packets received on this in-
        segment, which were chosen to be discarded even
        though no errors had been detected to prevent their
        being transmitted.  One possible reason for
        discarding such a labeled packet could be to free up
        buffer space."
   ::= { mplsInSegmentPerfEntry 4 }

mplsInSegmentPerfHCOctets OBJECT-TYPE
   SYNTAX        Counter64
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The total number of octets received.  This is the 64
        bit version of mplsInSegmentPerfOctets,
        if mplsInSegmentPerfHCOctets is supported according to
        the rules spelled out in RFC2863."
   ::= { mplsInSegmentPerfEntry 5 }




mplsInSegmentPerfDiscontinuityTime OBJECT-TYPE
   SYNTAX      TimeStamp
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "The value of sysUpTime on the most recent occasion
        at which any one or more of this segment's Counter32
        or Counter64 suffered a discontinuity. If no such
        discontinuities have occurred since the last re-
        initialization of the local management subsystem,
        then this object contains a zero value."
   ::= { mplsInSegmentPerfEntry 6 }

-- End of mplsInSegmentPerfTable.

-- out-segment table.

mplsOutSegmentIndexNext OBJECT-TYPE
   SYNTAX        MplsIndexNextType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "This object contains the next available value to
        be used for mplsOutSegmentIndex when creating entries
        in the mplsOutSegmentTable. The special value of a
        string containing the single octet 0x00
        indicates that no new entries can be created in this
        table. Agents not allowing managers to create entries
        in this table MUST set this object to this special
        value."
   ::= { mplsLsrObjects 6 }

mplsOutSegmentTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsOutSegmentEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table contains a representation of the outgoing
        segments from an LSR."
   ::= { mplsLsrObjects 7 }

mplsOutSegmentEntry  OBJECT-TYPE
   SYNTAX        MplsOutSegmentEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table represents one outgoing



        segment.  An entry can be created by a network
        administrator, an SNMP agent, or an MPLS signaling
        protocol.  The object mplsOutSegmentOwner indicates
        the creator of this entry. The value of
        mplsOutSegmentRowStatus cannot be active(1) unless
        the ifTable entry corresponding to
        mplsOutSegmentInterface exists.

        Note that the indexing of this table uses a single,
        arbitrary index (mplsOutSegmentIndex) to indicate
        which out-segment (i.e.: label) is being switched to
        from which in-segment (i.e: label) or in-segments.
        This is necessary because it is possible to have an
        equal-cost multi-path situation where two identical
        out-going labels are assigned to the same
        cross-connect (i.e.: they go to two different neighboring
        LSRs); thus, requiring two out-segments. In order to
        preserve the uniqueness of the references
        by the mplsXCEntry, an arbitrary integer must be used as
        the index for this table."
   INDEX { mplsOutSegmentIndex }
   ::= { mplsOutSegmentTable 1 }

MplsOutSegmentEntry ::= SEQUENCE {
  mplsOutSegmentIndex                MplsIndexType,
  mplsOutSegmentInterface            InterfaceIndexOrZero,
  mplsOutSegmentPushTopLabel         TruthValue,
  mplsOutSegmentTopLabel             MplsLabel,
  mplsOutSegmentTopLabelPtr          RowPointer,
  mplsOutSegmentNextHopAddrType      InetAddressType,
  mplsOutSegmentNextHopAddr          InetAddress,
  mplsOutSegmentXCIndex              MplsIndexType,
  mplsOutSegmentOwner                MplsOwner,
  mplsOutSegmentTrafficParamPtr      RowPointer,
  mplsOutSegmentRowStatus            RowStatus,
  mplsOutSegmentStorageType          StorageType
}

mplsOutSegmentIndex OBJECT-TYPE
   SYNTAX        MplsIndexType
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This value contains a unique index for this row.
        While a value of a string containing the single
        octet 0x00 is not valid as an index for entries
        in this table, it can be supplied as a valid value
        to index the mplsXCTable to represent entries for



        which no out-segment has been configured or
        exists."
   ::= { mplsOutSegmentEntry 1 }

mplsOutSegmentInterface OBJECT-TYPE
   SYNTAX        InterfaceIndexOrZero
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This value must contain the interface index of the
        outgoing interface. This object cannot be modified
        if mplsOutSegmentRowStatus is active(1). The
        mplsOutSegmentRowStatus cannot be set to active(1)
        until this object is set to a value corresponding to
        a valid ifEntry."
   ::= { mplsOutSegmentEntry 2 }

mplsOutSegmentPushTopLabel OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This value indicates whether or not a top label
        should be pushed onto the outgoing packet's label
        stack.  The value of this variable MUST be set to
        true(1) if the outgoing interface does not support
        pop-and-go (and no label stack remains). For example,
        on ATM interface, or if the segment represents a
        tunnel origination.  Note that it is considered
        an error in the case that mplsOutSegmentPushTopLabel
        is set to false, but the cross-connect entry which
        refers to this out-segment has a non-zero
        mplsLabelStackIndex.  The LSR MUST ensure that this
        situation does not happen. This object cannot be
        modified if mplsOutSegmentRowStatus is active(1)."
   DEFVAL { true }
   ::= { mplsOutSegmentEntry 3 }

mplsOutSegmentTopLabel OBJECT-TYPE
   SYNTAX        MplsLabel
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "If mplsOutSegmentPushTopLabel is true then this
        represents the label that should be pushed onto the
        top of the outgoing packet's label stack. Otherwise
        this value SHOULD be set to 0 by the management
        station and MUST be ignored by the agent. This



        object cannot be modified if mplsOutSegmentRowStatus
        is active(1)."
   DEFVAL { 0 }
   ::= { mplsOutSegmentEntry 4 }

mplsOutSegmentTopLabelPtr OBJECT-TYPE
   SYNTAX        RowPointer
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "If the label for this segment cannot be represented
        fully within the mplsOutSegmentLabel object,
        this object MUST point to the first accessible
        column of a conceptual row in an external table containing
        the label.  In this case, the mplsOutSegmentTopLabel
        object SHOULD be set to 0 and ignored. This object
        MUST be set to zeroDotZero otherwise."
   DEFVAL { zeroDotZero }
   ::= { mplsOutSegmentEntry 5 }

mplsOutSegmentNextHopAddrType OBJECT-TYPE
   SYNTAX        InetAddressType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Indicates the next hop Internet address type.
        Only values unknown(0), ipv4(1) or ipv6(2)
        have to be supported.

        A value of unknown(0) is allowed only when
        the outgoing interface is of type point-to-point.
        If any other unsupported values are attempted in a set
        operation, the agent MUST return an inconsistentValue
        error."
   REFERENCE
       "See RFC3291."
   ::= { mplsOutSegmentEntry 6 }

mplsOutSegmentNextHopAddr OBJECT-TYPE
   SYNTAX        InetAddress
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The internet address of the next hop. The type of
        this address is determined by the value of the
        mplslOutSegmentNextHopAddrType object.

        This object cannot be modified if



        mplsOutSegmentRowStatus is active(1)."
   ::= { mplsOutSegmentEntry 7 }

mplsOutSegmentXCIndex OBJECT-TYPE
   SYNTAX        MplsIndexType
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Index into mplsXCTable which identifies which cross-
        connect entry this segment is part of.  A value of
        the string containing the single octet 0x00
        indicates that this entry is not referred
        to by any cross-connect entry.  When a cross-connect
        entry is created which this out-segment is a part of,
        this object MUST be updated by the agent to reflect
        the value of mplsXCIndex of that cross-connect
        entry."
   ::= { mplsOutSegmentEntry 8 }

mplsOutSegmentOwner OBJECT-TYPE
   SYNTAX        MplsOwner
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Denotes the entity which created and is responsible
        for managing this segment."
   ::= { mplsOutSegmentEntry 9 }

mplsOutSegmentTrafficParamPtr OBJECT-TYPE
   SYNTAX        RowPointer
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "This variable represents a pointer to the traffic
      parameter specification for this out-segment.  This
      value may point at an entry in the
      MplsTunnelResourceEntry in the MPLS-TE-STD-MIB (RFC3812)

      RFC Editor: Please fill in RFC number.

      to indicate which traffic parameter settings for this
      segment if it represents an LSP used for a TE tunnel.

      This value may optionally point at an
      externally defined traffic parameter specification
      table.  A value of zeroDotZero indicates best-effort
      treatment.  By having the same value of this object,
      two or more segments can indicate resource sharing



      of such things as LSP queue space, etc.

      This object cannot be modified if
      mplsOutSegmentRowStatus is active(1).
      For entries in this table that
      are preserved after a re-boot, the agent MUST ensure
      that their integrity be preserved, or this object should
      be set to 0.0 if it cannot."
   DEFVAL { zeroDotZero }
   ::= { mplsOutSegmentEntry 10 }

mplsOutSegmentRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "For creating, modifying, and deleting this row.
        When a row in this table has a row in the active(1)
        state, no objects in this row can be modified
        except the mplsOutSegmentRowStatus or
        mplsOutSegmentStorageType."
   ::= { mplsOutSegmentEntry 11 }

mplsOutSegmentStorageType OBJECT-TYPE
   SYNTAX        StorageType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This variable indicates the storage type for this
        object. The agent MUST ensure that this object's value
        remains consistent with the associated mplsXCEntry.
        Conceptual rows having the value 'permanent'
        need not allow write-access to any columnar
        objects in the row."
   DEFVAL { volatile }
   ::= { mplsOutSegmentEntry 12 }

-- End of mplsOutSegmentTable


-- out-segment performance table.

mplsOutSegmentPerfTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsOutSegmentPerfEntry