diffserv-config-mib

很不错java的SNMP应用例子

DIFFSERV-CONFIG-MIB DEFINITIONS ::= BEGIN
    IMPORTS

    OBJECT-TYPE, MODULE-IDENTITY,
    zeroDotZero, mib-2            FROM SNMPv2-SMI          -- [RFC2578]

    RowStatus, StorageType,
    RowPointer, DateAndTime       FROM SNMPv2-TC           -- [RFC2579]

    MODULE-COMPLIANCE,
    OBJECT-GROUP                  FROM SNMPv2-CONF         -- [RFC2580]




    SnmpAdminString               FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]

diffServConfigMib MODULE-IDENTITY
    LAST-UPDATED "200401220000Z" -- 22 January 2004
    ORGANIZATION "SNMPCONF WG"
    CONTACT-INFO
       "SNMPCONF Working Group
        http://www.ietf.org/html.charters/snmpconf-charter.html
        WG mailing list: [e-mail]

        Editors:
        Harrie Hazewinkel
        I.Net
        via Darwin 85
        20019 - Settimo Milanese (MI)
        Italy
        EMail: [e-mail]

        David Partain
        Ericsson AB
        P.O. Box 1248
        SE-581 12 Linkoping
        Sweden
        E-mail: [e-mail]"
    DESCRIPTION
        "This MIB module contains differentiated services
        specific managed objects to perform higher-level
        configuration management.  This MIB allows policies
        to use 'templates' to instantiate Differentiated
        Services functional datapath configurations to
        be assigned (associated with an interface and
        direction) when a policy is activated.

        Copyright (C) The Internet Society (2004).  This version
        of this MIB module is part of RFC 3747;  see the RFC
        itself for full legal notices."
    REVISION "200401220000Z" -- 22 January 2004
    DESCRIPTION
        "Initial version published as RFC 3747"
    ::= { mib-2 108 }

diffServConfigMIBObjects OBJECT IDENTIFIER ::= { diffServConfigMib 1 }
diffServConfigMIBConformance OBJECT IDENTIFIER ::=
                                               { diffServConfigMib 2 }

--
-- The Differentiated Services configuration objects
--



diffServConfigTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF DiffServConfigEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
       "A table which defines the various per-hop-behaviors
       for which the system has default 'templates'."
    ::= { diffServConfigMIBObjects 2 }

diffServConfigEntry OBJECT-TYPE
    SYNTAX       DiffServConfigEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
       "An entry defining a per-hop-behavior.  Each entry in
       this table combines the various parameters (entries)
       into a specific per-hop-behavior.  Entries in this
       table might be defined by a vendor (pre-configured)
       or defined by a management application."
    INDEX { diffServConfigId }
    ::= { diffServConfigTable 1 }

DiffServConfigEntry ::= SEQUENCE {
    diffServConfigId           SnmpAdminString,
    diffServConfigDescr        SnmpAdminString,
    diffServConfigOwner        SnmpAdminString,
    diffServConfigLastChange   DateAndTime,
    diffServConfigStart        RowPointer,
    diffServConfigStorage      StorageType,
    diffServConfigStatus       RowStatus
}

diffServConfigId OBJECT-TYPE
    SYNTAX         SnmpAdminString (SIZE(1..116))
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
      "A unique id for the per-hop-behavior policy for at
       least the SNMP agent.  For ease of administration the
       value may be unique within an administrative domain,
       but this is not required.

       The range of up to 116 octets is chosen to stay within
       the SMI limit of 128 sub-identifiers in an object
       identifier."
    ::= { diffServConfigEntry 1 }

diffServConfigDescr OBJECT-TYPE



    SYNTAX         SnmpAdminString
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
       "A human-readable description to identify this defined
       per-hop-behavior.  Note that this is an SnmpAdminString,
       which permits UTF-8 strings.  An administratively assigned
       identifier for a template that would be unique within
       an administrative domain.  It is up to the management
       applications to agree how these are assigned within the
       administrative domain.  Once a description, such as
       'EF' is assigned, that has a certain set of parameters
       that achieve 'EF' from box to box. Management
       application code or script code can then scan
       the table to find the proper template and then
       assign it."
    ::= { diffServConfigEntry 2 }

diffServConfigOwner OBJECT-TYPE
    SYNTAX         SnmpAdminString
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
       "The owner who created this entry."
    ::= { diffServConfigEntry 3 }

diffServConfigLastChange OBJECT-TYPE
    SYNTAX         DateAndTime
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "The date and time when this entry was last changed."
    ::= { diffServConfigEntry 4 }

diffServConfigStart OBJECT-TYPE
    SYNTAX         RowPointer
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
       "The pointer to a functional datapath configuration template as
       set up in the DIFFSERV-MIB.  This RowPointer should
       point to an instance of one of:
         diffServClfrEntry
         diffServMeterEntry
         diffServActionEntry
         diffServAlgDropEntry
         diffServQEntry




       A value of zeroDotZero in this attribute indicates no
       further Diffserv treatment is performed on traffic of
       this functional datapath.  This also means that the
       template described by this row is not defined.

       If the row pointed to does not exist, the treatment
       is as if this attribute contains a value of zeroDotZero."
    REFERENCE
       "Differentiated Services MIB module"
    DEFVAL { zeroDotZero }
    ::= { diffServConfigEntry 5 }

diffServConfigStorage OBJECT-TYPE
    SYNTAX         StorageType
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
       "The type of storage used for this row.

       Since an entry in this table serves as a starting
       point for a configuration, it is recommended that
       all entries comprising the configuration started by
       diffServConfigStart follow the storage type of this
       entry.  Otherwise, after agent reboots a configuration
       may differ.  It may very well be that the agent is
       not capable of detecting such changes and therefore,
       the management application should verify the correct
       configuration after a reboot.  Rows with a StorageType
       of 'permanent' do not need to allow write access to
       any of the columnar objects in that row."
    DEFVAL { nonVolatile }
    ::= { diffServConfigEntry 6 }

diffServConfigStatus OBJECT-TYPE
    SYNTAX         RowStatus
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
       "RowStatus object used for creation and deletion of
       rows in this table.  All writable objects in this row
       may be modified at any time."
    DEFVAL { notInService }
    ::= { diffServConfigEntry 7 }

--
-- MIB Compliance statements.
--




diffServConfigMIBCompliances
   OBJECT IDENTIFIER ::= { diffServConfigMIBConformance 1 }
diffServConfigMIBGroups
   OBJECT IDENTIFIER ::= { diffServConfigMIBConformance 2 }

diffServConfigMIBFullCompliance MODULE-COMPLIANCE
    STATUS       current
    DESCRIPTION
       "The full compliance for this MIB module.

       For this compliance level the 'diffServMIBFullCompliance'
       must be met, since this MIB module depends on it in order
       to provide the configuration entries.
       "
    MODULE  -- This module
    MANDATORY-GROUPS {  diffServConfigMIBConfigGroup }

    OBJECT diffServConfigStatus
    SYNTAX RowStatus { active(1) }
    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
    DESCRIPTION
       "Support for createAndWait and notInService is not required."

    ::= { diffServConfigMIBCompliances 1 }

diffServConfigMIBConfigGroup OBJECT-GROUP
    OBJECTS {  diffServConfigDescr,
               diffServConfigOwner,
               diffServConfigLastChange,
               diffServConfigStart,
               diffServConfigStorage,
               diffServConfigStatus
    }
    STATUS current
    DESCRIPTION
       "The per-hop-behavior Group defines the MIB objects that
       describe the configuration template for the per-hop-behavior."
    ::= { diffServConfigMIBGroups 1 }
END