mau-mib

很不错java的SNMP应用例子

MAU-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        Counter32, Integer32, Counter64,
        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
        OBJECT-IDENTITY, mib-2
            FROM SNMPv2-SMI
        TruthValue, AutonomousType, TEXTUAL-CONVENTION
            FROM SNMPv2-TC
        OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
            FROM SNMPv2-CONF
        InterfaceIndex
            FROM IF-MIB;

    mauMod MODULE-IDENTITY
        LAST-UPDATED "200309190000Z"  -- September 19, 2003
        ORGANIZATION "IETF Ethernet Interfaces and Hub MIB
                     Working Group"
        CONTACT-INFO
            "WG E-mail: [e-mail]
          To subscribe: [e-mail]
                 Chair: Dan Romascanu
                Postal: Avaya Inc.
                        Atidim Technology Park, Bldg. 3
                        Tel Aviv 61131
                        Israel
                   Tel: [phone]
                E-mail: [e-mail]



                Editor: John Flick
                Postal: Hewlett-Packard Company
                        8000 Foothills Blvd. M/S 5557
                        Roseville, CA 95747-5557
                        USA
                   Tel: [phone]
                   Fax: [phone]
                E-mail: [e-mail]"
        DESCRIPTION "Management information for 802.3 MAUs.

                    The following reference is used throughout
                    this MIB module:

                    [IEEE 802.3 Std] refers to:
                       IEEE Std 802.3, 2002 Edition: 'IEEE Standard
                       for Information technology -
                       Telecommunications and information exchange
                       between systems - Local and metropolitan
                       area networks - Specific requirements -
                       Part 3: Carrier sense multiple access with
                       collision detection (CSMA/CD) access method
                       and physical layer specifications', as
                       amended by IEEE Std 802.3ae-2002:
                       'Amendment: Media Access Control (MAC)
                       Parameters, Physical Layer, and Management
                       Parameters for 10 Gb/s Operation', August,
                       2002.

                    Of particular interest is Clause 30, '10Mb/s,
                    100Mb/s, 1000Mb/s and 10 Gb/s Management'.

                    Copyright (C) The Internet Society (2003).  This
                    version of this MIB module is part of RFC 3636;
                    see the RFC itself for full legal notices."

        REVISION    "200309190000Z"  -- September 19, 2003
        DESCRIPTION "Updated to include support for 10 Gb/s MAUs.
                    This resulted in the following revisions:
                    - Added OBJECT-IDENTITY definitions for
                      10 gigabit MAU types
                    - Added fiberLC jack type to JackType TC
                    - Extended ifMauTypeListBits with bits for
                      the 10 gigabit MAU types
                    - Added enumerations to ifMauMediaAvailable,
                      and updated its DESCRIPTION to reflect
                      behaviour at 10 Gb/s
                    - Added 64-bit version of ifMauFalseCarriers
                      and added mauIfGrpHCStats object group to



                      contain the new object
                    - Deprecated mauModIfCompl2 and replaced it
                      with mauModIfCompl3, which includes the new
                      object group

                     This version published as RFC 3636."

        REVISION    "199908240400Z" -- August 24, 1999
        DESCRIPTION "This version published as RFC 2668.  Updated
                    to include support for 1000 Mb/sec
                    MAUs and flow control negotiation."

        REVISION    "199710310000Z" -- October 31, 1997
        DESCRIPTION "Version published as RFC 2239."

        REVISION    "199309300000Z" -- September30, 1993
        DESCRIPTION "Initial version, published as RFC 1515."

        ::= { snmpDot3MauMgt 6 }

    snmpDot3MauMgt OBJECT IDENTIFIER ::= { mib-2 26 }

    -- textual conventions

    JackType ::= TEXTUAL-CONVENTION
        STATUS      current
        DESCRIPTION "Common enumeration values for repeater
                    and interface MAU jack types."
        SYNTAX      INTEGER {
                        other(1),
                        rj45(2),
                        rj45S(3), -- rj45 shielded
                        db9(4),
                        bnc(5),
                        fAUI(6),  -- female aui
                        mAUI(7),  -- male aui
                        fiberSC(8),
                        fiberMIC(9),
                        fiberST(10),
                        telco(11),
                        mtrj(12),  -- fiber MT-RJ
                        hssdc(13), -- fiber channel style-2
                        fiberLC(14)
                    }

    dot3RpMauBasicGroup
        OBJECT IDENTIFIER ::= { snmpDot3MauMgt 1 }
    dot3IfMauBasicGroup



        OBJECT IDENTIFIER ::= { snmpDot3MauMgt 2 }
    dot3BroadMauBasicGroup
        OBJECT IDENTIFIER ::= { snmpDot3MauMgt 3 }

    dot3IfMauAutoNegGroup
        OBJECT IDENTIFIER ::= { snmpDot3MauMgt 5 }

    -- object identities for MAU types
    --  (see rpMauType and ifMauType for usage)

    dot3MauType
        OBJECT IDENTIFIER ::= { snmpDot3MauMgt 4 }

    dot3MauTypeAUI OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "no internal MAU, view from AUI"
        REFERENCE   "[IEEE 802.3 Std.], Section 7"
        ::= { dot3MauType 1 }

    dot3MauType10Base5 OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "thick coax MAU"
        REFERENCE   "[IEEE 802.3 Std.], Section 7"
        ::= { dot3MauType 2 }

    dot3MauTypeFoirl OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "FOIRL MAU"
        REFERENCE   "[IEEE 802.3 Std.], Section 9.9"
        ::= { dot3MauType 3 }

    dot3MauType10Base2 OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "thin coax MAU"
        REFERENCE   "[IEEE 802.3 Std.], Section 10"
        ::= { dot3MauType 4 }

    dot3MauType10BaseT OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "UTP MAU.
                    Note that it is strongly recommended that
                    agents return either dot3MauType10BaseTHD or
                    dot3MauType10BaseTFD if the duplex mode is
                    known.  However, management applications should
                    be prepared to receive this MAU type value from
                    older agent implementations."
        REFERENCE   "[IEEE 802.3 Std.], Section 14"
        ::= { dot3MauType 5 }



    dot3MauType10BaseFP OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "passive fiber MAU"
        REFERENCE   "[IEEE 802.3 Std.], Section 16"
        ::= { dot3MauType 6 }

    dot3MauType10BaseFB OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "sync fiber MAU"
        REFERENCE   "[IEEE 802.3 Std.], Section 17"
        ::= { dot3MauType 7 }

    dot3MauType10BaseFL OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "async fiber MAU.
                    Note that it is strongly recommended that
                    agents return either dot3MauType10BaseFLHD or
                    dot3MauType10BaseFLFD if the duplex mode is
                    known.  However, management applications should
                    be prepared to receive this MAU type value from
                    older agent implementations."
        REFERENCE   "[IEEE 802.3 Std.], Section 18"
        ::= { dot3MauType 8 }

    dot3MauType10Broad36 OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "broadband DTE MAU.
                    Note that 10BROAD36 MAUs can be attached to
                    interfaces but not to repeaters."
        REFERENCE   "[IEEE 802.3 Std.], Section 11"
        ::= { dot3MauType 9 }
    ------ new since RFC 1515:

    dot3MauType10BaseTHD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "UTP MAU, half duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 14"
        ::= { dot3MauType 10 }

    dot3MauType10BaseTFD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "UTP MAU, full duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 14"
        ::= { dot3MauType 11 }

    dot3MauType10BaseFLHD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "async fiber MAU, half duplex mode"



        REFERENCE   "[IEEE 802.3 Std.], Section 18"
        ::= { dot3MauType 12 }

    dot3MauType10BaseFLFD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "async fiber MAU, full duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 18"
        ::= { dot3MauType 13 }

    dot3MauType100BaseT4 OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "4 pair category 3 UTP"
        REFERENCE   "[IEEE 802.3 Std.], Section 23"
        ::= { dot3MauType 14 }

    dot3MauType100BaseTXHD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "2 pair category 5 UTP, half duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 25"
        ::= { dot3MauType 15 }

    dot3MauType100BaseTXFD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "2 pair category 5 UTP, full duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 25"
        ::= { dot3MauType 16 }

    dot3MauType100BaseFXHD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "X fiber over PMT, half duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 26"
        ::= { dot3MauType 17 }

    dot3MauType100BaseFXFD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "X fiber over PMT, full duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 26"
        ::= { dot3MauType 18 }

    dot3MauType100BaseT2HD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "2 pair category 3 UTP, half duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 32"
        ::= { dot3MauType 19 }

    dot3MauType100BaseT2FD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "2 pair category 3 UTP, full duplex mode"



        REFERENCE   "[IEEE 802.3 Std.], Section 32"
        ::= { dot3MauType 20 }

    ------ new since RFC 2239:

    dot3MauType1000BaseXHD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "PCS/PMA, unknown PMD, half duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 36"
        ::= { dot3MauType 21 }

    dot3MauType1000BaseXFD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "PCS/PMA, unknown PMD, full duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 36"
        ::= { dot3MauType 22 }

    dot3MauType1000BaseLXHD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "Fiber over long-wavelength laser, half duplex
                    mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 38"
        ::= { dot3MauType 23 }

    dot3MauType1000BaseLXFD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "Fiber over long-wavelength laser, full duplex
                    mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 38"
        ::= { dot3MauType 24 }

    dot3MauType1000BaseSXHD OBJECT-IDENTITY
        STATUS      current
        DESCRIPTION "Fiber over short-wavelength laser, half
                    duplex mode"
        REFERENCE   "[IEEE 802.3 Std.], Section 38"
        ::= { dot3MauType 25 }