hdsl2-shdsl-line-mib

很不错java的SNMP应用例子

hdsl2ShdslSpanConfCurrCondTargetMarginUp OBJECT-TYPE
   SYNTAX      Integer32(-10..21)
   UNITS       "dB"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object specifies the upstream current condition target
      SNR margin for a SHDSL line.  The SNR margin is the difference
      between the desired SNR and the actual SNR.  Target SNR margin
      is the desired SNR margin for a unit."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslSpanConfProfileEntry 11 }

hdsl2ShdslSpanConfWorstCaseTargetMarginUp OBJECT-TYPE
   SYNTAX      Integer32(-10..21)
   UNITS       "dB"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object specifies the upstream worst case target SNR
      margin for a SHDSL line.  The SNR margin is the difference
      between the desired SNR and the actual SNR.  Target SNR margin
      is the desired SNR margin for a unit."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslSpanConfProfileEntry 12 }

hdsl2ShdslSpanConfUsedTargetMargins OBJECT-TYPE
   SYNTAX      BITS
               {
               currCondDown(0),
               worstCaseDown(1),
               currCondUp(2),
               worstCaseUp(3)
               }
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "Contains indicates whether a target SNR margin is enabled or
      disabled.  This is a bit-map of possible settings.  The
      various bit positions are:

      currCondDown     current condition downstream target SNR
                       margin enabled

      worstCaseDown    worst case downstream target SNR margin
                       enabled

      currCondUp       current condition upstream target SNR



                       margin enabled

      worstCaseUp      worst case upstream target SNR margin
                       enabled."
   DEFVAL      { { currCondDown } }
   ::= { hdsl2ShdslSpanConfProfileEntry 13 }

hdsl2ShdslSpanConfReferenceClock OBJECT-TYPE
   SYNTAX      Hdsl2ShdslClockReferenceType
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the clock reference for the STU-C
     in a SHDSL Line."
   DEFVAL      { localClk }
   ::= { hdsl2ShdslSpanConfProfileEntry 14 }

hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
   SYNTAX      INTEGER
               {
               disable(1),
               enable(2)
               }
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object enables/disables support for Line Probe of
     the units in a SHDSL line.  When Line Probe is enabled, the
     system performs Line Probing to find the best possible
     rate.  If Line probe is disabled, the rate adaptation phase
     is skipped to shorten set up time."
   DEFVAL      { disable }
   ::= { hdsl2ShdslSpanConfProfileEntry 15 }

hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE
   SYNTAX      RowStatus
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object controls creation/deletion of the associated
      entry in this table per the semantics of RowStatus.  If an
      active entry is referenced in hdsl2ShdslSpanConfProfile, the
      entry MUST remain active until all references are removed."
   ::= { hdsl2ShdslSpanConfProfileEntry 16 }

-- Segment Endpoint Alarm Configuration Profile group
--




hdsl2ShdslEndpointAlarmConfProfileTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF Hdsl2ShdslEndpointAlarmConfProfileEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table supports definitions of alarm configuration
      profiles for HDSL2/SHDSL segment endpoints.  This table
      MUST be maintained in a persistent manner."
   ::= { hdsl2ShdslMibObjects 11 }

hdsl2ShdslEndpointAlarmConfProfileEntry OBJECT-TYPE
   SYNTAX      Hdsl2ShdslEndpointAlarmConfProfileEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "Each entry corresponds to a single alarm configuration profile.
      Each profile contains a set of parameters for setting alarm
      thresholds for various performance attributes monitored at
      HDSL2/SHDSL segment endpoints.  Profiles may be created/deleted
      using the row creation/deletion mechanism via
      hdsl2ShdslEndpointAlarmConfProfileRowStatus.  If an active
      entry is referenced in either hdsl2ShdslSpanConfAlarmProfile
      or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
      active until all references are removed."
   INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName }
   ::= { hdsl2ShdslEndpointAlarmConfProfileTable 1 }

Hdsl2ShdslEndpointAlarmConfProfileEntry ::=
   SEQUENCE
   {
   hdsl2ShdslEndpointAlarmConfProfileName       SnmpAdminString,
   hdsl2ShdslEndpointThreshLoopAttenuation      Integer32,
   hdsl2ShdslEndpointThreshSNRMargin            Integer32,
   hdsl2ShdslEndpointThreshES
               Hdsl2ShdslPerfIntervalThreshold,
   hdsl2ShdslEndpointThreshSES
               Hdsl2ShdslPerfIntervalThreshold,
   hdsl2ShdslEndpointThreshCRCanomalies         Integer32,
   hdsl2ShdslEndpointThreshLOSWS
               Hdsl2ShdslPerfIntervalThreshold,
   hdsl2ShdslEndpointThreshUAS
               Hdsl2ShdslPerfIntervalThreshold,
   hdsl2ShdslEndpointAlarmConfProfileRowStatus  RowStatus
   }

hdsl2ShdslEndpointAlarmConfProfileName OBJECT-TYPE
   SYNTAX      SnmpAdminString (SIZE(1..32))
   MAX-ACCESS  not-accessible



   STATUS      current
   DESCRIPTION
     "This object is the unique index associated with this profile."
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 1 }

hdsl2ShdslEndpointThreshLoopAttenuation OBJECT-TYPE
   SYNTAX      Integer32(-127..128)
   UNITS       "dB"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the loop attenuation alarm threshold.
      When the current value of hdsl2ShdslEndpointCurrAtn reaches
      or exceeds this threshold, a hdsl2ShdslLoopAttenCrossing
      MAY be generated."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 2 }

hdsl2ShdslEndpointThreshSNRMargin OBJECT-TYPE
   SYNTAX      Integer32(-127..128)
   UNITS       "dB"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the SNR margin alarm threshold.
      When the current value of hdsl2ShdslEndpointCurrSnrMgn
      reaches or drops below this threshold, a
      hdsl2ShdslSNRMarginCrossing MAY be generated."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 3 }

hdsl2ShdslEndpointThreshES OBJECT-TYPE
   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
   UNITS       "seconds"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the threshold for the number of
      errored seconds (ES) within any given 15-minute performance
      data collection interval.  If the value of errored seconds
      in a particular 15-minute collection interval reaches/
      exceeds this value, a hdsl2ShdslPerfESThresh MAY be
      generated.  At most one notification will be sent per
      interval per endpoint."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 4 }

hdsl2ShdslEndpointThreshSES OBJECT-TYPE



   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
   UNITS       "seconds"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the threshold for the number of
      severely errored seconds (SES) within any given 15-minute
      performance data collection interval.  If the value of
      severely errored seconds in a particular 15-minute collection
      interval reaches/exceeds this value, a hdsl2ShdslPerfSESThresh
      MAY be generated.  At most one notification will be sent per
      interval per endpoint."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 5 }

hdsl2ShdslEndpointThreshCRCanomalies OBJECT-TYPE
   SYNTAX      Integer32
   UNITS       "detected CRC Anomalies"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the threshold for the number of
      CRC anomalies within any given 15-minute performance data
      collection interval.  If the value of CRC anomalies in a
      particular 15-minute collection interval reaches/exceeds
      this value, a hdsl2ShdslPerfCRCanomaliesThresh MAY be
      generated.  At most one notification will be sent per
      interval per endpoint."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 6 }

hdsl2ShdslEndpointThreshLOSWS OBJECT-TYPE
   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
   UNITS       "seconds"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the threshold for the number of
      Loss of Sync Word (LOSW) Seconds within any given 15-minute
      performance data collection interval.  If the value of LOSW
      in a particular 15-minute collection interval reaches/exceeds
      this value, a hdsl2ShdslPerfLOSWSThresh MAY be generated.
      At most one notification will be sent per interval per
      endpoint."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 7 }

hdsl2ShdslEndpointThreshUAS OBJECT-TYPE



   SYNTAX      Hdsl2ShdslPerfIntervalThreshold
   UNITS       "seconds"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object configures the threshold for the number of
      unavailable seconds (UAS) within any given 15-minute
      performance data collection interval.  If the value of UAS
      in a particular 15-minute collection interval reaches/exceeds
      this value, a hdsl2ShdslPerfUASThresh MAY be generated.
      At most one notification will be sent per interval per
      endpoint."
   DEFVAL      { 0 }
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 8 }

hdsl2ShdslEndpointAlarmConfProfileRowStatus OBJECT-TYPE
   SYNTAX      RowStatus
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
     "This object controls creation/deletion of the associated
      entry in this table as per the semantics of RowStatus.
      If an active entry is referenced in either
      hdsl2ShdslSpanConfAlarmProfile or
      hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
      active until all references are removed."
   ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 9 }

-- Notifications Group
--

hdsl2ShdslNotifications OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 0 }

hdsl2ShdslLoopAttenCrossing NOTIFICATION-TYPE
   OBJECTS
   {
   hdsl2ShdslEndpointCurrAtn,
   hdsl2ShdslEndpointThreshLoopAttenuation
   }
   STATUS     current
   DESCRIPTION
     "This notification indicates that the loop attenuation
      threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation
      value) has been reached/exceeded for the HDSL2/SHDSL segment
      endpoint."
   ::= { hdsl2ShdslNotifications 1 }

hdsl2ShdslSNRMarginCrossing NOTIFICATION-TYPE



   OBJECTS
   {

   hdsl2ShdslEndpointCurrSnrMgn,
   hdsl2ShdslEndpointThreshSNRMargin
   }
   STATUS     current
   DESCRIPTION
     "This notification indicates that the SNR margin threshold (as
      per the hdsl2ShdslEndpointThreshSNRMargin value) has been
      reached/exceeded for the HDSL2/SHDSL segment endpoint."
   ::= { hdsl2ShdslNotifications 2 }

hdsl2ShdslPerfESThresh NOTIFICATION-TYPE
   OBJECTS
   {
   hdsl2ShdslEndpointCurr15MinES,
   hdsl2ShdslEndpointThreshES
   }
   STATUS     current
   DESCRIPTION
     "This notification indicates that the errored seconds threshold
      (as per the hdsl2ShdslEndpointThreshES value) has been reached/
      exceeded for the HDSL2/SHDSL segment endpoint."
   ::= { hdsl2ShdslNotifications 3 }

hdsl2ShdslPerfSESThresh NOTIFICATION-TYPE
   OBJECTS
   {
   hdsl2ShdslEndpointCurr15MinSES,
   hdsl2ShdslEndpointThreshSES
   }
   STATUS     current
   DESCRIPTION
     "This notification indicates that the severely errored seconds
      threshold (as per the hdsl2ShdslEndpointThreshSES value) has
      been reached/exceeded for the HDSL2/SHDSL Segment Endpoint."
   ::= { hdsl2ShdslNotifications 4 }

hdsl2ShdslPerfCRCanomaliesThresh NOTIFICATION-TYPE
   OBJECTS
   {
   hdsl2ShdslEndpointCurr15MinCRCanomalies,
   hdsl2ShdslEndpointThreshCRCanomalies
   }
   STATUS    current
   DESCRIPTION
     "This notification indicates that the CRC anomalies threshold



      (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has
      been reached/exceeded for the HDSL2/SHDSL Segment Endpoint."
   ::= { hdsl2ShdslNotifications 5 }

hdsl2ShdslPerfLOSWSThresh NOTIFICATION-TYPE
   OBJECTS
   {

   hdsl2ShdslEndpointCurr15MinLOSWS,
   hdsl2ShdslEndpointThreshLOSWS
   }
   STATUS     current
   DESCRIPTION
     "This notification indicates that the LOSW seconds threshold
      (as per the hdsl2ShdslEndpointThreshLOSWS value) has been
      reached/exceeded for the HDSL2/SHDSL segment endpoint."
   ::= { hdsl2ShdslNotifications 6 }

hdsl2ShdslPerfUASThresh NOTIFICATION-TYPE
   OBJECTS
   {
   hdsl2ShdslEndpointCurr15MinUAS,
   hdsl2ShdslEndpointThreshUAS
   }
   STATUS     current
   DESCRIPTION
     "This notification indicates that the unavailable seconds
      threshold (as per the hdsl2ShdslEndpointThreshUAS value) has
      been reached/exceeded for the HDSL2/SHDSL segment endpoint."
   ::= { hdsl2ShdslNotifications 7 }

hdsl2ShdslSpanInvalidNumRepeaters N