hdsl2-shdsl-line-mib

很不错java的SNMP应用例子

     This is intended to supplement ifOperStatus.  Note that there
     is a 1-1 relationship between the status bits defined in this
     object and the notification thresholds defined elsewhere in
     this MIB."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 3 }

hdsl2ShdslEndpointES OBJECT-TYPE
   SYNTAX      Counter32
   UNITS       "seconds"
   MAX-ACCESS  read-only
   STATUS      current



   DESCRIPTION
     "Count of Errored Seconds (ES) on this endpoint since the xU
      was last restarted."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 4 }

hdsl2ShdslEndpointSES OBJECT-TYPE
   SYNTAX       Counter32
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Severely Errored Seconds (SES) on this endpoint
      since the xU was last restarted."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 5 }

hdsl2ShdslEndpointCRCanomalies OBJECT-TYPE
   SYNTAX       Counter32
   UNITS        "detected CRC Anomalies"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of CRC anomalies on this endpoint since the xU was
      last restarted."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 6 }

hdsl2ShdslEndpointLOSWS OBJECT-TYPE
   SYNTAX       Counter32
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Loss of Sync Word (LOSW) Seconds on this endpoint
      since the xU was last restarted."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 7 }

hdsl2ShdslEndpointUAS OBJECT-TYPE
   SYNTAX       Counter32
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Unavailable Seconds (UAS) on this endpoint since
      the xU was last restarted."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"



   ::= { hdsl2ShdslEndpointCurrEntry 8 }

hdsl2ShdslEndpointCurr15MinTimeElapsed OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfTimeElapsed
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Total elapsed seconds in the current 15-minute interval."
   ::= { hdsl2ShdslEndpointCurrEntry 9 }

hdsl2ShdslEndpointCurr15MinES OBJECT-TYPE
   SYNTAX       PerfCurrentCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Errored Seconds (ES) in the current 15-minute
      interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 10 }

hdsl2ShdslEndpointCurr15MinSES OBJECT-TYPE
   SYNTAX       PerfCurrentCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Severely Errored Seconds (SES) in the current
      15-minute interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 11 }

hdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE
   SYNTAX       PerfCurrentCount
   UNITS        "detected CRC Anomalies"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of CRC anomalies in the current 15-minute interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 12 }

hdsl2ShdslEndpointCurr15MinLOSWS OBJECT-TYPE
   SYNTAX       PerfCurrentCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current



   DESCRIPTION
     "Count of Loss of Sync Word (LOSW) Seconds in the current
      15-minute interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 13 }

hdsl2ShdslEndpointCurr15MinUAS OBJECT-TYPE
   SYNTAX       PerfCurrentCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Unavailable Seconds (UAS) in the current 15-minute
      interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 14 }

hdsl2ShdslEndpointCurr1DayTimeElapsed OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfTimeElapsed
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Number of seconds that have elapsed since the beginning of
      the current 1-day interval."
   ::= { hdsl2ShdslEndpointCurrEntry 15 }

hdsl2ShdslEndpointCurr1DayES OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfCurrDayCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Errored Seconds (ES) during the current day as
      measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 16 }

hdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfCurrDayCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Severely Errored Seconds (SES) during the current
      day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 17 }



hdsl2ShdslEndpointCurr1DayCRCanomalies OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfCurrDayCount
   UNITS        "detected CRC Anomalies"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of CRC anomalies during the current day as measured
      by hdsl2ShdslEndpointCurr1DayTimeElapsed."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 18 }

hdsl2ShdslEndpointCurr1DayLOSWS OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfCurrDayCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Loss of Sync Word (LOSW) Seconds during the current
      day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 19 }

hdsl2ShdslEndpointCurr1DayUAS OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfCurrDayCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Unavailable Seconds (UAS) during the current day as
      measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2ShdslEndpointCurrEntry 20 }

-- Segment Endpoint 15-Minute Interval Status/Performance Group
--

hdsl2Shdsl15MinIntervalTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF Hdsl2Shdsl15MinIntervalEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table provides one row for each HDSL2/SHDSL endpoint
      performance data collection interval.  This table contains
      live data from equipment.  As such, it is NOT persistent."
   ::= { hdsl2ShdslMibObjects 6 }

hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE
   SYNTAX      Hdsl2Shdsl15MinIntervalEntry



   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "An entry in the hdsl2Shdsl15MinIntervalTable."
   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
           hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}
   ::= { hdsl2Shdsl15MinIntervalTable 1 }

Hdsl2Shdsl15MinIntervalEntry ::=
   SEQUENCE
   {
   hdsl2Shdsl15MinIntervalNumber         Unsigned32,
   hdsl2Shdsl15MinIntervalES             PerfIntervalCount,
   hdsl2Shdsl15MinIntervalSES            PerfIntervalCount,
   hdsl2Shdsl15MinIntervalCRCanomalies   PerfIntervalCount,
   hdsl2Shdsl15MinIntervalLOSWS          PerfIntervalCount,
   hdsl2Shdsl15MinIntervalUAS            PerfIntervalCount
   }

hdsl2Shdsl15MinIntervalNumber OBJECT-TYPE
   SYNTAX      Unsigned32(1..96)
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "Performance Data Interval number. 1 is the the most recent
      previous interval; interval 96 is 24 hours ago. Intervals
      2..96 are optional."
   ::= { hdsl2Shdsl15MinIntervalEntry 1 }

hdsl2Shdsl15MinIntervalES OBJECT-TYPE
   SYNTAX      PerfIntervalCount
   UNITS       "seconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "Count of Errored Seconds (ES) during the interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2Shdsl15MinIntervalEntry 2 }

hdsl2Shdsl15MinIntervalSES OBJECT-TYPE
   SYNTAX      PerfIntervalCount
   UNITS       "seconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "Count of Severely Errored Seconds (SES) during the interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2Shdsl15MinIntervalEntry 3 }



hdsl2Shdsl15MinIntervalCRCanomalies OBJECT-TYPE
   SYNTAX      PerfIntervalCount
   UNITS       "detected CRC Anomalies"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "Count of CRC anomalies during the interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2Shdsl15MinIntervalEntry 4 }

hdsl2Shdsl15MinIntervalLOSWS OBJECT-TYPE
   SYNTAX      PerfIntervalCount
   UNITS       "seconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "Count of Loss of Sync Word (LOSW) Seconds during the
      interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2Shdsl15MinIntervalEntry 5 }

hdsl2Shdsl15MinIntervalUAS OBJECT-TYPE
   SYNTAX      PerfIntervalCount
   UNITS       "seconds"
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
     "Count of Unavailable Seconds (UAS) during the interval."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2Shdsl15MinIntervalEntry 6 }

-- Segment Endpoint 1-Day Interval Status/Performance Group
--

hdsl2Shdsl1DayIntervalTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF Hdsl2Shdsl1DayIntervalEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "This table provides one row for each HDSL2/SHDSL endpoint
      performance data collection interval.  This table contains
      live data from equipment.  As such, it is NOT persistent."
   ::= { hdsl2ShdslMibObjects 7 }

hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE
   SYNTAX      Hdsl2Shdsl1DayIntervalEntry
   MAX-ACCESS  not-accessible
   STATUS      current



   DESCRIPTION
     "An entry in the hdsl2Shdsl1DayIntervalTable."
   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
           hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber }
   ::= { hdsl2Shdsl1DayIntervalTable 1 }

Hdsl2Shdsl1DayIntervalEntry ::=
   SEQUENCE
   {
   hdsl2Shdsl1DayIntervalNumber         Unsigned32,
   hdsl2Shdsl1DayIntervalMoniSecs       Hdsl2ShdslPerfTimeElapsed,
   hdsl2Shdsl1DayIntervalES             Hdsl2Shdsl1DayIntervalCount,
   hdsl2Shdsl1DayIntervalSES            Hdsl2Shdsl1DayIntervalCount,
   hdsl2Shdsl1DayIntervalCRCanomalies   Hdsl2Shdsl1DayIntervalCount,
   hdsl2Shdsl1DayIntervalLOSWS          Hdsl2Shdsl1DayIntervalCount,
   hdsl2Shdsl1DayIntervalUAS            Hdsl2Shdsl1DayIntervalCount
   }

hdsl2Shdsl1DayIntervalNumber OBJECT-TYPE
   SYNTAX      Unsigned32(1..30)
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
     "History Data Interval number. Interval 1 is the the most
      recent previous day; interval 30 is 30 days ago. Intervals
      2..30 are optional."
   ::= { hdsl2Shdsl1DayIntervalEntry 1 }

hdsl2Shdsl1DayIntervalMoniSecs OBJECT-TYPE
   SYNTAX       Hdsl2ShdslPerfTimeElapsed
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "The amount of time in the 1-day interval over which the
      performance monitoring information is actually counted.
      This value will be the same as the interval duration except
      in a situation where performance monitoring data could not
      be collected for any reason."
   ::= { hdsl2Shdsl1DayIntervalEntry 2 }

hdsl2Shdsl1DayIntervalES OBJECT-TYPE
   SYNTAX       Hdsl2Shdsl1DayIntervalCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Errored Seconds (ES) during the 1-day interval as



      measured by hdsl2Shdsl1DayIntervalMoniSecs."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2Shdsl1DayIntervalEntry 3 }

hdsl2Shdsl1DayIntervalSES OBJECT-TYPE
   SYNTAX       Hdsl2Shdsl1DayIntervalCount
   UNITS        "seconds"
   MAX-ACCESS   read-only
   STATUS       current
   DESCRIPTION
     "Count of Severely Errored Seconds (SES) during the 1-day
      interval as measured by hdsl2Shdsl1DayIntervalMoniSecs."
   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"
   ::= { hdsl2Shdsl1DayIntervalEntry 4 }

hdsl2Shdsl1DayIntervalCRCanomalies OBJECT-TYPE
   SYNTAX       Hdsl2Shdsl1DayIntervalCount
   UNITS        "detected CRC Anomalies"