⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 rfc1231-mib

📁 很不错java的SNMP应用例子
💻
📖 第 1 页 / 共 3 页
字号:
                    for a particular interface."           INDEX   { dot5StatsIfIndex }           ::= { dot5StatsTable 1 }Dot5StatsEntry    ::= SEQUENCE {            dot5StatsIfIndex                INTEGER,            dot5StatsLineErrors                Counter,            dot5StatsBurstErrors                Counter,            dot5StatsACErrors                Counter,            dot5StatsAbortTransErrors                Counter,            dot5StatsInternalErrors                Counter,            dot5StatsLostFrameErrors                Counter,            dot5StatsReceiveCongestions                Counter,            dot5StatsFrameCopiedErrors                Counter,            dot5StatsTokenErrors                Counter,            dot5StatsSoftErrors                Counter,            dot5StatsHardErrors                Counter,            dot5StatsSignalLoss                Counter,            dot5StatsTransmitBeacons                Counter,            dot5StatsRecoverys                Counter,            dot5StatsLobeWires                Counter,            dot5StatsRemoves                Counter,            dot5StatsSingles                Counter,            dot5StatsFreqErrors                Counter        }dot5StatsIfIndex  OBJECT-TYPE           SYNTAX  INTEGER           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The value of this object identifies the                   802.5 interface for which this entry                   contains management information.  The                   value of this object for a particular                   interface has the same value as the                   ifIndex object, defined in [4,6], for                   the same interface."           ::= { dot5StatsEntry 1 }dot5StatsLineErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a frame                   or token is copied or repeated by a                   station, the E bit is zero in the frame                   or token and one of the following                   conditions exists: 1) there is a                   non-data bit (J or K bit) between the SD                   and the ED of the frame or token, or                   2) there is an FCS error in the frame."           ::= { dot5StatsEntry 2 }dot5StatsBurstErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   detects the absence of transitions for five                   half-bit timers (burst-five error)."           ::= { dot5StatsEntry 3 }dot5StatsACErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   receives an AMP or SMP frame in which A is                   equal to C is equal to 0, and then receives                   another SMP frame with A is equal to C is                   equal to 0 without first receiving an AMP                   frame. It denotes a station that cannot set                   the AC bits properly."           ::= { dot5StatsEntry 4 }dot5StatsAbortTransErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   transmits an abort delimiter while                   transmitting."           ::= { dot5StatsEntry 5 }dot5StatsInternalErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   recognizes an internal error."           ::= { dot5StatsEntry 6 }dot5StatsLostFrameErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   is transmitting and its TRR timer expires.                   This condition denotes a condition where a                   transmitting station in strip mode does not                   receive the trailer of the frame before the                   TRR timer goes off."           ::= { dot5StatsEntry 7 }dot5StatsReceiveCongestions OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   recognizes a frame addressed to its                   specific address, but has no available                   buffer space indicating that the station                   is congested."           ::= { dot5StatsEntry 8 }dot5StatsFrameCopiedErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   recognizes a frame addressed to its                   specific address and detects that the FS                   field A bits are set to 1 indicating a                   possible line hit or duplicate address."           ::= { dot5StatsEntry 9 }dot5StatsTokenErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "This counter is incremented when a station                   acting as the active monitor recognizes an                   error condition that needs a token                   transmitted."           ::= { dot5StatsEntry 10 }dot5StatsSoftErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of Soft Errors the interface                   has detected. It directly corresponds to                   the number of Report Error MAC frames                   that this interface has transmitted.                   Soft Errors are those which are                   recoverable by the MAC layer protocols."           ::= { dot5StatsEntry 11 }dot5StatsHardErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of times this interface has                   detected an immediately recoverable                   fatal error.  It denotes the number of                   times this interface is either                   transmitting or receiving beacon MAC                   frames."           ::= { dot5StatsEntry 12 }dot5StatsSignalLoss OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of times this interface has                   detected the loss of signal condition from                   the ring."           ::= { dot5StatsEntry 13 }dot5StatsTransmitBeacons OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of times this interface has                   transmitted a beacon frame."           ::= { dot5StatsEntry 14 }dot5StatsRecoverys OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of Claim Token MAC frames                   received or transmitted after the interface                   has received a Ring Purge MAC frame.  This                   counter signifies the number of times the                   ring has been purged and is being recovered                   back into a normal operating state."           ::= { dot5StatsEntry 15 }dot5StatsLobeWires OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of times the interface has                   detected an open or short circuit in the                   lobe data path.  The adapter will be closed                   and dot5RingState will signify this                   condition."           ::= { dot5StatsEntry 16 }dot5StatsRemoves OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of times the interface has                   received a Remove Ring Station MAC frame                   request.  When this frame is received                   the interface will enter the close state                   and dot5RingState will signify this                   condition."           ::= { dot5StatsEntry 17 }dot5StatsSingles OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  mandatory           DESCRIPTION                   "The number of times the interface has                   sensed that it is the only station on the                   ring.  This will happen if the interface                   is the first one up on a ring, or if                   there is a hardware problem."           ::= { dot5StatsEntry 18 }dot5StatsFreqErrors OBJECT-TYPE           SYNTAX  Counter           ACCESS  read-only           STATUS  optional           DESCRIPTION                   "The number of times the interface has                   detected that the frequency of the                   incoming signal differs from the expected                   frequency by more than that specified by                   the IEEE 802.5 standard, see chapter 7                   in [10]."           ::= { dot5StatsEntry 19 }-- The Timer Table-- This group contains the values of the timers defined in-- [10] for 802.5 interfaces.  It is optional that systems-- having 802.5 interfaces implement this group.dot5TimerTable  OBJECT-TYPE           SYNTAX  SEQUENCE OF Dot5TimerEntry           ACCESS  not-accessible           STATUS  mandatory

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -