ipatm-ipmc-mib

很不错java的SNMP应用例子

IPATM-IPMC-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
        FROM SNMPv2-CONF
    snmpModules, MODULE-IDENTITY, NOTIFICATION-TYPE, Counter32,
        Integer32, Unsigned32, OBJECT-TYPE, IpAddress
        FROM SNMPv2-SMI
    AtmAddr
        FROM ATM-TC-MIB
    TruthValue, RowStatus
        FROM SNMPv2-TC
    ipAdEntAddr
        FROM RFC1213-MIB
    InterfaceIndex
        FROM IF-MIB;

marsMIB MODULE-IDENTITY
    LAST-UPDATED "9804150145Z" -- 15 April 1998
    ORGANIZATION "Internetworking Over NBMA (ion) Working Group"
    CONTACT-INFO
        "        Chris Chung
         Postal: SAIC
                 1710 Goodridge Drive
                 Mail Stop 1-4-7
                 McLean, VA 22102
         Tel:    [phone]
         Fax:    [phone]
         E-mail: [e-mail]

         Editor: Maria Greene
         Postal: Independent Contractor
         E-mail: [e-mail]
        "
    DESCRIPTION
        "This module defines a portion of the managed information
         base (MIB) for managing classical IP multicast address
         resolution server (MARS) and related entities as
         described in the RFC2022.  This MIB is meant to be
         used in conjunction with the ATM-MIB (RFC1695),
         MIB-II (RFC1213), and optionally the IF-MIB (RFC1573)."
    ::= { snmpModules 17 }

--***************************************************************
--  IP ATM MARS Client Object Definitions
--***************************************************************
marsClientObjects  OBJECT IDENTIFIER ::= { marsMIB 1 }

marsClientTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF MarsClientEntry
    MAX-ACCESS  not-accessible
    STATUS current
    DESCRIPTION
        "The objects defined in this table are used for
         the management of MARS clients, ATM attached
         endpoints."
    ::= { marsClientObjects 1 }

marsClientEntry OBJECT-TYPE
    SYNTAX  MarsClientEntry
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "Each entry contains a MARS client and its associated
         attributes.  An entry in the marsClientTable has
         a corresponding entry in the ipAddrTable defined in
         RFC1213. Association between the ipAddrTable and
         the marsClientTable is made through the index,
         ipAdEntAddr."
    INDEX { ipAdEntAddr, marsClientIndex }
    ::= { marsClientTable 1 }

MarsClientEntry ::=
    SEQUENCE {
        marsClientIndex                    Integer32,
        marsClientAddr                     AtmAddr,
        marsClientDefaultMarsAddr          AtmAddr,
        marsClientHsn                      Unsigned32,
        marsClientRegistration             INTEGER,
        marsClientCmi                      INTEGER,
        marsClientDefaultMtu               INTEGER,
        marsClientFailureTimer             INTEGER,
        marsClientRetranDelayTimer         INTEGER,
        marsClientRdmMulReqAddRetrTimer    INTEGER,
        marsClientRdmVcRevalidateTimer     INTEGER,
        marsClientJoinLeaveRetrInterval    INTEGER,
        marsClientJoinLeaveRetrLimit       INTEGER,
        marsClientRegWithMarsRdmTimer      INTEGER,
        marsClientForceWaitTimer           INTEGER,
        marsClientLmtToMissRedirMapTimer   INTEGER,
        marsClientIdleTimer                INTEGER,
        marsClientRowStatus                RowStatus
    }

marsClientIndex OBJECT-TYPE
    SYNTAX  Integer32(1..65535)
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "The auxiliary variable used to identify instances of
         the columnar objects in the MARS MarsClientTable."
    ::= { marsClientEntry 1 }

marsClientAddr OBJECT-TYPE
    SYNTAX  AtmAddr
       MAX-ACCESS read-create
       STATUS  current
       DESCRIPTION
           "The ATM address associated with the ATM Client."
       ::= { marsClientEntry 2 }

marsClientDefaultMarsAddr OBJECT-TYPE
    SYNTAX  AtmAddr
       MAX-ACCESS read-create
       STATUS  current
       DESCRIPTION
           "The default MARS ATM address which is needed to
            setup the initial signalling path between a MARS
            client and its associated MARS."
       ::= { marsClientEntry 3 }

marsClientHsn OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS read-create
       STATUS  current
       DESCRIPTION
           "The cluster membership own 32 bit Host Sequence
            Number.  When a new cluster member starts up, it is
            initialized to zero.  When the cluster member sends
            the MARS_JOIN to register, the HSN will be correctly
            set to the current cluster sequence number (CSN) when
            the Client receives the copy of its MARS_JOIN from
            the MARS.  It is is used to track the MARS sequence
            number."
       ::= { marsClientEntry 4 }

marsClientRegistration OBJECT-TYPE
    SYNTAX  INTEGER {
          notRegistered (1),
          registering (2),
          registered (3),
          reRegisteringFault (4),
          reRegisteringRedirMap (5)
        }
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "An indication with regards to the registration
         status of this client. The registration codes
         of 'notRegistered (1)', 'registered (2)', and
         registered (3) are self-explanatory. The
         'reRegisteringFault (4)' indicates the client is
         in the process of re-registering with a MARS due
         to some fault conditions.  The 'reRegisteringRedMap
         (5)' status code shows that client is re-registering
         because it has received a MARS_REDIRECT_MAP message
         and was told to register with a different MARS from
         the current MARS."
    ::= { marsClientEntry 5 }

marsClientCmi OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "16 bit Cluster member identifier (CMI) assigned by the
         MARS which uniquely identifies each endpoint attached
         to the cluster.  The value becomes valid after the
         'marsClientRegistration' is set to the value
         of 'registered (1)'."
    ::= { marsClientEntry 6 }

marsClientDefaultMtu OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The default maximum transmission unit (MTU) used for
         this cluster.  Note that the actual size used for a
         VC between two members of the cluster may be negotiated
         during connection setup and may be different than this
         value.  Default value = 9180 bytes."
    DEFVAL { 9180 }
    ::= { marsClientEntry 7 }

marsClientFailureTimer OBJECT-TYPE
    SYNTAX  INTEGER (1..2147483647)
    UNITS   "seconds"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "A timer used to flag the failure of last MARS_MULTI
         to arrive.  Default value = 10 seconds (recommended)."
    DEFVAL { 10 }
    ::= { marsClientEntry 8 }

marsClientRetranDelayTimer OBJECT-TYPE
    SYNTAX  INTEGER (5..10)
    UNITS   "seconds"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The delay timer for sending out new MARS_REQUEST
         for the group after the client learned that there
         is no other group in the cluster.  The timer must
         be set between 5 and 10 seconds inclusive."
    ::= { marsClientEntry 9 }

marsClientRdmMulReqAddRetrTimer OBJECT-TYPE
    SYNTAX  INTEGER (5..10)
    UNITS   "seconds"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The initial random L_MULTI_RQ/ADD retransmit timer
         which can be set between 5 and 10 seconds inclusive."
    ::= { marsClientEntry 10 }

marsClientRdmVcRevalidateTimer OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    UNITS   "seconds"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The random time to set VC_revalidate flag.  The
         timer value ranges between 1 and 10 seconds
         inclusive."
    ::= { marsClientEntry 11 }

marsClientJoinLeaveRetrInterval OBJECT-TYPE
    SYNTAX  INTEGER(5..2147483647)
    UNITS   "seconds"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "MARS_JOIN/LEAVE retransmit interval. The minimum
         and recommended values are 5 and 10 seconds,
         respectively."
    DEFVAL { 10 }
    ::= { marsClientEntry 12 }

marsClientJoinLeaveRetrLimit OBJECT-TYPE
    SYNTAX  INTEGER (0..5)
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "MARS_JOIN/LEAVE retransmit limit. The maximum
         value is 5."
    ::= { marsClientEntry 13 }

marsClientRegWithMarsRdmTimer OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    UNITS   "seconds"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "Random time to register with MARS."
    ::= { marsClientEntry 14 }

marsClientForceWaitTimer OBJECT-TYPE
    SYNTAX  INTEGER (1..2147483647)
    UNITS   "minutes"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "Force wait if MARS re-registration is looping.
         The minimum value is 1 minute."
    ::= { marsClientEntry 15 }

marsClientLmtToMissRedirMapTimer OBJECT-TYPE
    SYNTAX  INTEGER (1..4)
    UNITS   "seconds"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "Timer limit for client to miss MARS_REDIRECT_MAPS."
    ::= { marsClientEntry 16 }

marsClientIdleTimer OBJECT-TYPE
    SYNTAX  INTEGER (1..2147483647)
    UNITS   "minutes"
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The configurable inactivity timer associated with a
         client. When a VC is created at this client, it gets
         the idle timer value from this configurable timer.
         The minimum suggested value is 1 minute and the
         recommended default value is 20 minutes."
    DEFVAL { 20 }
    ::= { marsClientEntry 17 }

marsClientRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The object is used to create, delete or modify a
         row in this table.

         A row cannot be made 'active' until instances of
         all corresponding columns in the row of this table
         are appropriately configured and until the agent
         has also created a corresponding row in the
         marsClientStatTable.

         When this object has a value of 'active', the
         following columnar objects can not be modified:

           marsClientDefaultMarsAddr,
           marsClientHsn,
           marsClientRegstration,
           marsClientCmi,
           marsClientDefaultMtu

         while other objects in this conceptual row can be
         modified irrespective of the value of this object.

         Deletion of this row is allowed regardless of
         whether or not a row in any associated tables
         (i.e., marsClientVcTable) still exists or is in
         use. Once this row is deleted, it is recommended
         that the agent or the SNMP management station
         (if possible) through the set command deletes
         any stale rows that are associated with this
         row."
    ::= { marsClientEntry 18 }

--****************************************************************
-- IP ATM MARS Client Multicast Group Address Object Definitions
--****************************************************************

marsClientMcGrpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF MarsClientMcGrpEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table contains a list of IP multicast group address
         blocks associated with a MARS client.  Entries in this
         table are used by the client that needs to receive or
         transmit packets from/to the specified range of
         multicast addresses.
         Each row can be created or deleted via configuration."
    ::= {  marsClientObjects 2 }

marsClientMcGrpEntry OBJECT-TYPE
    SYNTAX  MarsClientMcGrpEntry
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "Each entry represents a consecutive block of multicast
         group addresses."
    INDEX { ipAdEntAddr,
            marsClientIndex,
            marsClientMcMinGrpAddr,
            marsClientMcMaxGrpAddr }
    ::= { marsClientMcGrpTable 1 }

MarsClientMcGrpEntry ::=
    SEQUENCE {
        marsClientMcMinGrpAddr           IpAddress,
        marsClientMcMaxGrpAddr           IpAddress,
        marsClientMcGrpRowStatus         RowStatus
    }

marsClientMcMinGrpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "Minimum multicast group address - the min and max
         multicast forms multi-group block.  If the MinGrpAddr
         and MaxGrpAddr are the same, it indicates that this
         block contains a single group address."
    ::= { marsClientMcGrpEntry 1 }

marsClientMcMaxGrpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "Maximum multicast group address - the min and max
         multicast forms a multi-group block.  If the MinGrpAddr
         and MaxGrpAddr are the same, it indicates that this
         block contains a single group address."
    ::= { marsClientMcGrpEntry 2 }

marsClientMcGrpRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The object is used to create or delete a row in this
         table.

         Since other objects in this row are not-accessible
         'index-objects', the value of this object has no
         effect on whether those objects in this conceptual
         row can be modified."
    ::= { marsClientMcGrpEntry 3 }

--****************************************************************
-- IP ATM MARS Client Backup MARS Object Definitions
--****************************************************************