rfc1407-mib

很不错java的SNMP应用例子

dsx3CurrentCSESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of C-bit Severely Errored Seconds
            encountered by a DS3 interface in the current 15
            minute interval."
    ::= { dsx3CurrentEntry 11 }


-- the DS3/E3 Interval

-- The DS3/E3 Interval Table contains various statistics
-- collected by each DS3/E3 Interface over the previous 24
-- hours of operation.  The past 24 hours are broken into 96
-- completed 15 minute intervals.

dsx3IntervalTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF Dsx3IntervalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "The DS3/E3 Interval table."
    ::= { ds3 7 }

dsx3IntervalEntry OBJECT-TYPE
    SYNTAX  Dsx3IntervalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An entry in the DS3/E3 Interval table."
    INDEX   { dsx3IntervalIndex, dsx3IntervalNumber }
    ::= { dsx3IntervalTable 1 }

Dsx3IntervalEntry ::=
    SEQUENCE {
        dsx3IntervalIndex
            INTEGER,
        dsx3IntervalNumber
            INTEGER,
        dsx3IntervalPESs
            Gauge,
        dsx3IntervalPSESs
            Gauge,
        dsx3IntervalSEFSs
            Gauge,
        dsx3IntervalUASs
            Gauge,
        dsx3IntervalLCVs
            Gauge,
        dsx3IntervalPCVs
            Gauge,
        dsx3IntervalLESs
            Gauge,
        dsx3IntervalCCVs
            Gauge,
        dsx3IntervalCESs
            Gauge,
        dsx3IntervalCSESs
            Gauge
    }

dsx3IntervalIndex OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The index value which uniquely identifies the
            DS3/E3 interface to which this entry is
            applicable.  The interface identified by a
            particular value of this index is the same
            interface as identified by the same value an
            dsx3LineIndex object instance."
    ::= { dsx3IntervalEntry 1 }

dsx3IntervalNumber OBJECT-TYPE
    SYNTAX  INTEGER (1..96)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "A number between 1 and 96, where 1 is the most
            recently completed 15 minute interval and 96 is
            the least recently completed 15 minutes interval
            (assuming that all 96 intervals are valid)."
    ::= { dsx3IntervalEntry 2 }

dsx3IntervalPESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of P-bit
            Errored Seconds, encountered by a DS3 interface in
            one of the previous 96, individual 15 minute,
            intervals."
    ::= { dsx3IntervalEntry 3 }

dsx3IntervalPSESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of P-bit
            Severely Errored Seconds, encountered by a DS3
            interface in one of the previous 96, individual 15
            minute, intervals."
    ::= { dsx3IntervalEntry 4 }

dsx3IntervalSEFSs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of
            Severely Errored Framing Seconds, encountered by a
            DS3/E3 interface in one of the previous 96,
            individual 15 minute, intervals."
    ::= { dsx3IntervalEntry 5 }

dsx3IntervalUASs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of
            Unavailable Seconds, encountered by a DS3
            interface in one of the previous 96, individual 15
            minute, intervals."
    ::= { dsx3IntervalEntry 6 }

dsx3IntervalLCVs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of Line
            Coding Violations encountered by a DS3/E3
            interface in one of the previous 96, individual 15
            minute, intervals."
    ::= { dsx3IntervalEntry 7 }

dsx3IntervalPCVs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of P-bit
            Coding Violations, encountered by a DS3 interface
            in one of the previous 96, individual 15 minute,
            intervals."
    ::= { dsx3IntervalEntry 8 }

dsx3IntervalLESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
         "The number of Line Errored  Seconds  (BPVs  or
         illegal  zero  sequences) encountered by a DS3/E3
         interface in one of the previous 96, individual
         15 minute, intervals."
    ::= { dsx3IntervalEntry 9 }

dsx3IntervalCCVs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of C-bit Coding Violations encountered
            by a DS3 interface in one of the previous 96,
            individual 15 minute, intervals."
    ::= { dsx3IntervalEntry 10 }

dsx3IntervalCESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of C-bit Errored Seconds encountered
            by a DS3 interface in one of the previous 96,
            individual 15 minute, intervals."
    ::= { dsx3IntervalEntry 11 }

dsx3IntervalCSESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of C-bit Severely Errored Seconds
            encountered by a DS3 interface in one of the
            previous 96, individual 15 minute, intervals."
    ::= { dsx3IntervalEntry 12 }


-- the DS3/E3 Total

-- The DS3/E3 Total Table contains the cumulative sum of the
-- various statistics for the 24 hour period preceding the
-- current interval.

dsx3TotalTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF Dsx3TotalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "The DS3/E3 Total table.  24 hour interval."
    ::= { ds3 8 }

dsx3TotalEntry OBJECT-TYPE
    SYNTAX  Dsx3TotalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
            "An entry in the DS3/E3 Total table."
    INDEX   { dsx3TotalIndex }
    ::= { dsx3TotalTable 1 }

Dsx3TotalEntry ::=
    SEQUENCE {
        dsx3TotalIndex
            INTEGER,
        dsx3TotalPESs
            Gauge,
        dsx3TotalPSESs
            Gauge,
        dsx3TotalSEFSs
            Gauge,
        dsx3TotalUASs
            Gauge,
        dsx3TotalLCVs
            Gauge,
        dsx3TotalPCVs
            Gauge,
        dsx3TotalLESs
            Gauge,
        dsx3TotalCCVs
            Gauge,
        dsx3TotalCESs
            Gauge,
        dsx3TotalCSESs
            Gauge
    }

dsx3TotalIndex OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The index value which uniquely identifies the
            DS3/E3 interface to which this entry is
            applicable.  The interface identified by a
            particular value of this index is the same
            interface as identified by the same value an
            dsx3LineIndex object instance."
    ::= { dsx3TotalEntry 1 }

dsx3TotalPESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of P-bit
            Errored Seconds, encountered by a DS3 interface in
            the previous 24 hour interval"
    ::= { dsx3TotalEntry 2 }

dsx3TotalPSESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of P-bit
            Severely Errored Seconds, encountered by a DS3
            interface in the previous 24 hour interval."
    ::= { dsx3TotalEntry 3 }

dsx3TotalSEFSs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of
            Severely Errored Framing Seconds, encountered by a
            DS3/E3 interface in the previous 24 hour
            interval."
    ::= { dsx3TotalEntry 4 }

dsx3TotalUASs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of
            Unavailable Seconds, encountered by a DS3
            interface in the previous 24 hour interval."
    ::= { dsx3TotalEntry 5 }

dsx3TotalLCVs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of Line
            Coding Violations encountered by a DS3/E3
            interface in the previous 24 hour interval."
    ::= { dsx3TotalEntry 6 }

dsx3TotalPCVs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The counter associated with the number of P-bit
            Coding Violations, encountered by a DS3 interface
            in the previous 24 hour interval."
    ::= { dsx3TotalEntry 7 }

dsx3TotalLESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
         "The number of Line Errored  Seconds  (BPVs  or
         illegal  zero  sequences) encountered by a DS3/E3
         interface in the previous 24 hour interval."
    ::= { dsx3TotalEntry 8 }

dsx3TotalCCVs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of C-bit Coding Violations encountered
            by a DS3 interface in the previous 24 hour
            interval."
    ::= { dsx3TotalEntry 9 }

dsx3TotalCESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of C-bit Errored Seconds encountered
            by a DS3 interface in the previous 24 hour
            interval."
    ::= { dsx3TotalEntry 10 }

dsx3TotalCSESs OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
            "The number of C-bit Severely Errored Seconds
            encountered by a DS3 interface in the previous 24
            hour interval."
    ::= { dsx3TotalEntry 11 }


-- The DS3 Far End Group

-- Implementation of this group is optional for all systems
-- that attach to a DS3 Interface.
-- However, only C-bit Parity and SYNTRAN DS3 applications
-- have the capability (option) of providing this information.

-- The DS3 Far End Group consists of four tables:
--   DS3 Far End Configuration
--   DS3 Far End Current
--   DS3 Far End Interval
--   DS3 Far End Total


-- The DS3 Far End Configuration Table contains
-- configuration information
-- reported in the C-bits from the remote end.

dsx3FarEndConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF Dsx3FarEndConfigEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
       "The DS3 Far End Configuration table."
    ::= { ds3 9 }

dsx3FarEndConfigEntry OBJECT-TYPE
    SYNTAX  Dsx3FarEndConfigEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
         "An entry in the DS3 Far End Configuration table."
    INDEX   { dsx3FarEndLineIndex }
    ::= { dsx3FarEndConfigTable 1 }

Dsx3FarEndConfigEntry ::=
    SEQUENCE {
        dsx3FarEndLineIndex
            INTEGER,
        dsx3FarEndEquipCode
            DisplayString,
        dsx3FarEndLocationIDCode
            DisplayString,
        dsx3FarEndFrameIDCode
            DisplayString,
        dsx3FarEndUnitCode
            DisplayString,
        dsx3FarEndFacilityIDCode
            DisplayString
     }

dsx3FarEndLineIndex OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
         "The index value which uniquely identifies the
         DS3 interface
         to which this entry is applicable.  The
         interface identified by a particular value of
         this index is the same interface as identified
         by the same value an dsx3LineIndex object
         instance."
   ::= { dsx3FarEndConfigEntry 1 }

dsx3FarEndEquipCode OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..10))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
          "This is the Far End Equipment Identification code
          that describes the specific piece of equipment.
          It is sent within the Path
          Identification Message."
    ::= { dsx3FarEndConfigEntry 2 }

dsx3FarEndLocationIDCode OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..11))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
          "This is the Far End Location Identification code
          that describes the specific location of the
          equipment.
          It is sent within the Path
          Identification Message."
    ::= { dsx3FarEndConfigEntry 3 }

dsx3FarEndFrameIDCode OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..10))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
          "This is the Far End Frame Identification code
          that identifies where the equipment is located
          within a building at a given location.
          It is sent within the Path
          Identification Message."
    ::= { dsx3FarEndConfigEntry 4 }

dsx3FarEndUnitCode OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..6))
    ACCESS  read-write
    STATUS  mandatory