atm-mib

很不错java的SNMP应用例子

ATM-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE,
   Counter32, Integer32, IpAddress, mib-2
       FROM SNMPv2-SMI
   DisplayString, RowStatus, TruthValue
       FROM SNMPv2-TC
   MODULE-COMPLIANCE, OBJECT-GROUP
       FROM SNMPv2-CONF
   InterfaceIndex, ifIndex
       FROM IF-MIB
   AtmAddr, AtmConnKind, AtmConnCastType,
   AtmServiceCategory, AtmTrafficDescrParamIndex,
   AtmVpIdentifier, AtmVcIdentifier,
   AtmVorXAdminStatus, AtmVorXLastChange,
   AtmVorXOperStatus, atmNoClpNoScr
       FROM ATM-TC-MIB;


atmMIB MODULE-IDENTITY
     LAST-UPDATED "9810191200Z"
     ORGANIZATION "IETF AToM MIB Working Group"
     CONTACT-INFO
       "          Kaj Tesink
         Postal:  Bellcore
                  331 Newman Springs Road
                  Red Bank, NJ 07701
         Tel:     [phone]
         Fax:     [phone]
         E-mail:  [e-mail]"
     DESCRIPTION
      "This is the MIB Module for ATM and AAL5-related
       objects for managing ATM interfaces, ATM virtual
       links, ATM cross-connects, AAL5 entities, and
       and AAL5 connections."
     REVISION      "9810191200Z"
     DESCRIPTION
      "The initial revision of this module was published
       as RFC 1695. Key revisions include:
       o  Textual Conventions and OBJECT IDENTITIES have
          been moved to a separate MIB module.
       o  Applicability of objects to PVCs, SVCs and Soft
          PVCs has been clarified.
       o  DEFVAL clauses have been added.
       o  The relationship of ifIndex values with different
          layers and sublayers related to ATM has been
          clarified.
       o  atmTrafficQosClass has been deprecated
          and replaced with atmServiceCategory.
       o  atmInterfaceCurrentMaxVpiBits and
          atmInterfaceCurrentMaxVciBits have been added with
          a description on their relationship with other
          objects.
       o  atmInterfaceAddressType and atmInterfaceAdminAddress
          have been deprecated and replaced by
          atmInterfaceSubscrAddress.
       o  atmInterfaceTCAlarmState has been clarified.
       o  atmTrafficDescrParamIndexNext has been introduced
          in order to provide a manager a free
          atmTrafficDescrParamIndex value.
       o  The atmTrafficFrameDiscard capability has been added.
       o  A connection topology type (atmVpl/VclCastType) and
          a call control type (atmVpl/VclConnKind) have been
          added.
       o  aal2 has been added to atmVccAalType."
     REVISION      "9406072245Z"
     DESCRIPTION
      "The RFC1695 version of this MIB module."
     ::= { mib-2 37 }


atmMIBObjects  OBJECT IDENTIFIER ::= {atmMIB 1}

-- {atmMIBObjects 1} has been moved to a separate
-- specification [19].


-- This ATM MIB Module consists of the following tables:
-- (1) ATM Interface configuration table
-- (2) ATM Interface DS3 PLCP table
-- (3) ATM Interface TC Sublayer table

-- (4) Atm Traffic Descriptor table
-- (5) ATM Interface VPL configuration table
-- (6) ATM Interface VCL configuration table
-- (7) ATM VP Cross Connect table (for PVCs)
-- (8) ATM VC Cross Connect table (for PVCs)
-- (9) ATM Interface AAL5 VCC performance statistics
--     table

--    ATM Interface Configuration Parameters Table

-- This table contains ATM specific
-- configuration information associated with
-- an ATM interface beyond those
-- supported using the ifTable.




atmInterfaceConfTable  OBJECT-TYPE
     SYNTAX         SEQUENCE OF AtmInterfaceConfEntry
     MAX-ACCESS     not-accessible
     STATUS         current
     DESCRIPTION
      "This table contains ATM local interface
       configuration parameters, one entry per ATM
       interface port."
     ::= { atmMIBObjects 2 }

atmInterfaceConfEntry    OBJECT-TYPE
     SYNTAX         AtmInterfaceConfEntry
     MAX-ACCESS     not-accessible
     STATUS         current
     DESCRIPTION
      "This list contains ATM interface configuration
       parameters and state variables and is indexed
       by ifIndex values of ATM interfaces."
     INDEX { ifIndex }
     ::= { atmInterfaceConfTable  1}

AtmInterfaceConfEntry    ::= SEQUENCE  {
     atmInterfaceMaxVpcs             INTEGER,
     atmInterfaceMaxVccs             INTEGER,
     atmInterfaceConfVpcs            INTEGER,
     atmInterfaceConfVccs            INTEGER,
     atmInterfaceMaxActiveVpiBits    INTEGER,
     atmInterfaceMaxActiveVciBits    INTEGER,
     atmInterfaceIlmiVpi             AtmVpIdentifier,
     atmInterfaceIlmiVci             AtmVcIdentifier,
     atmInterfaceAddressType         INTEGER,
     atmInterfaceAdminAddress        AtmAddr,
     atmInterfaceMyNeighborIpAddress IpAddress,
     atmInterfaceMyNeighborIfName    DisplayString,
     atmInterfaceCurrentMaxVpiBits   INTEGER,
     atmInterfaceCurrentMaxVciBits   INTEGER,
     atmInterfaceSubscrAddress       AtmAddr
          }


atmInterfaceMaxVpcs OBJECT-TYPE
     SYNTAX         INTEGER  (0..4096)
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The maximum number of VPCs (PVPCs and SVPCs)
       supported at this ATM interface. At the ATM UNI,
       the maximum number of VPCs (PVPCs and SVPCs)
       ranges from 0 to 256 only."
     ::= { atmInterfaceConfEntry 1}

atmInterfaceMaxVccs OBJECT-TYPE
     SYNTAX         INTEGER  (0..65536)
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The maximum number of VCCs (PVCCs and SVCCs)
       supported at this ATM interface."
     ::= { atmInterfaceConfEntry 2}

atmInterfaceConfVpcs  OBJECT-TYPE
     SYNTAX         INTEGER  (0..4096)
     MAX-ACCESS     read-only
     STATUS         current
     DESCRIPTION
      "The number of VPCs (PVPC, Soft PVPC and SVPC)
       currently in use at this ATM interface.  It includes
       the number of PVPCs and Soft PVPCs that are configured
       at the interface, plus the number of SVPCs
       that are currently  established at the
       interface.

       At the ATM UNI, the configured number of
       VPCs (PVPCs and SVPCs) can range from
       0 to 256 only."
     ::= { atmInterfaceConfEntry 3}

atmInterfaceConfVccs  OBJECT-TYPE
     SYNTAX         INTEGER  (0..65536)
     MAX-ACCESS     read-only
     STATUS         current
     DESCRIPTION
      "The number of VCCs (PVCC, Soft PVCC and SVCC)
       currently in use at this ATM interface.  It includes
       the number of PVCCs and Soft PVCCs that are configured
       at the interface, plus the number of SVCCs
       that are currently  established at the
       interface."
     ::= { atmInterfaceConfEntry 4}

atmInterfaceMaxActiveVpiBits  OBJECT-TYPE
     SYNTAX         INTEGER (0..12)
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The  maximum number of active VPI bits
       configured for use at the ATM interface.
       At the ATM UNI, the maximum number of active
       VPI bits configured for use ranges from
       0 to 8 only."
     ::= { atmInterfaceConfEntry 5}

atmInterfaceMaxActiveVciBits  OBJECT-TYPE
     SYNTAX         INTEGER (0..16)
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The maximum number of active VCI bits
       configured for use at this ATM interface."
     ::= { atmInterfaceConfEntry 6}

atmInterfaceIlmiVpi OBJECT-TYPE
     SYNTAX         AtmVpIdentifier
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The VPI value of the VCC supporting
       the ILMI at this ATM interface.  If the values of
       atmInterfaceIlmiVpi and atmInterfaceIlmiVci are
       both equal to zero then the ILMI is not
       supported at this ATM interface."
     DEFVAL { 0 }
     ::= { atmInterfaceConfEntry 7}

atmInterfaceIlmiVci OBJECT-TYPE
     SYNTAX         AtmVcIdentifier
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The VCI value of the VCC supporting
       the ILMI at this ATM interface.  If the values of
       atmInterfaceIlmiVpi and atmInterfaceIlmiVci are
       both equal to zero then the ILMI is not
       supported at this ATM interface."
     DEFVAL { 16 }
     ::= { atmInterfaceConfEntry 8}

atmInterfaceAddressType  OBJECT-TYPE
     SYNTAX         INTEGER {
                       private(1),
                       nsapE164(2),
                       nativeE164(3),
                       other(4)
                         }
     MAX-ACCESS     read-only
     STATUS         deprecated
     DESCRIPTION
      "The type of primary ATM address configured
       for use at this ATM interface."
     ::= { atmInterfaceConfEntry 9 }

--  The atmInterfaceAdminAddress object has been replaced by
--  atmInterfaceSubscrAddress.

atmInterfaceAdminAddress OBJECT-TYPE
     SYNTAX         AtmAddr
     MAX-ACCESS     read-only
     STATUS         deprecated
     DESCRIPTION
      "The primary address assigned for administrative purposes,
       for example, an address associated with the
       service provider side of a public network UNI
       (thus, the value of this address corresponds
       with the value of ifPhysAddress at the host side).
       If this interface has no assigned administrative
       address, or when the address used for
       administrative purposes is the same as that used
       for ifPhysAddress, then this is an octet string of
       zero length."
     ::= { atmInterfaceConfEntry 10 }

atmInterfaceMyNeighborIpAddress OBJECT-TYPE
     SYNTAX         IpAddress
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The IP address of the neighbor system connected to
       the  far end of this interface, to which a Network
       Management Station can send SNMP messages, as IP
       datagrams sent to UDP port 161, in order to access
       network management information concerning the
       operation of that system.  Note that the value
       of this object may be obtained in different ways,
       e.g., by manual configuration, or through ILMI
       interaction with the neighbor system."
     ::= { atmInterfaceConfEntry 11 }

atmInterfaceMyNeighborIfName OBJECT-TYPE
     SYNTAX         DisplayString
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The textual name of the interface on the neighbor
       system on the far end of this interface, and to
       which this interface connects.  If the neighbor
       system is manageable through SNMP and supports
       the object ifName, the value of this object must
       be identical with that of ifName for the ifEntry
       of the lowest level physical interface
       for this port.  If this interface does not have a
       textual name, the value of this object is a zero
       length string.  Note that the value of this object
       may be obtained in different ways, e.g., by manual
       configuration, or through ILMI interaction with
       the neighbor system."
     ::= { atmInterfaceConfEntry 12 }

atmInterfaceCurrentMaxVpiBits    OBJECT-TYPE
     SYNTAX         INTEGER  (0..12)
     MAX-ACCESS     read-only
     STATUS         current
     DESCRIPTION
      "The maximum number of VPI Bits that may
       currently be used at this ATM interface.
       The value is the minimum of
       atmInterfaceMaxActiveVpiBits, and the
       atmInterfaceMaxActiveVpiBits of the interface's
       UNI/NNI peer.

       If the interface does not negotiate with
       its peer to determine the number of VPI Bits
       that can be used on the interface, then the
       value of this object must equal
       atmInterfaceMaxActiveVpiBits."
     ::= { atmInterfaceConfEntry 13 }

atmInterfaceCurrentMaxVciBits    OBJECT-TYPE
     SYNTAX         INTEGER  (0..16)
     MAX-ACCESS     read-only
     STATUS         current
     DESCRIPTION
      "The maximum number of VCI Bits that may
       currently be used at this ATM interface.
       The value is the minimum of
       atmInterfaceMaxActiveVciBits, and the
       atmInterfaceMaxActiveVciBits of the interface's
       UNI/NNI peer.

       If the interface does not negotiate with
       its peer to determine the number of VCI Bits
       that can be used on the interface, then the
       value of this object must equal
       atmInterfaceMaxActiveVciBits."
     ::= { atmInterfaceConfEntry 14 }

atmInterfaceSubscrAddress OBJECT-TYPE
     SYNTAX         AtmAddr
     MAX-ACCESS     read-write
     STATUS         current
     DESCRIPTION
      "The identifier assigned by a service provider
       to the network side of a public network UNI.
       If this interface has no assigned service provider
       address, or for other interfaces this is an octet string
       of zero length."
     ::= { atmInterfaceConfEntry 15 }

-- The ATM Interface DS3 PLCP Table

-- This table contains the DS3 PLCP configuration and
-- state parameters of those ATM interfaces
-- which use DS3 PLCP for carrying ATM cells over DS3.

atmInterfaceDs3PlcpTable  OBJECT-TYPE
     SYNTAX       SEQUENCE OF AtmInterfaceDs3PlcpEntry
     MAX-ACCESS   not-accessible
     STATUS       current