decnet-phiv-mib

很不错java的SNMP应用例子

     DESCRIPTION
         "Number of connects received from the target host."
     ::= { phivEndCountEntry 11 }

phivEndCountConnectsSent OBJECT-TYPE
     SYNTAX PhivCounter (0..65535)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of connects sent to the target host."
     ::= {phivEndCountEntry 12 }

phivEndCountReponseTimeouts OBJECT-TYPE
     SYNTAX PhivCounter (0..65535)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of response timeouts."
     ::= { phivEndCountEntry 13 }

phivEndCountRecdConnectResErrs OBJECT-TYPE
     SYNTAX PhivCounter (0..65535)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of received connect resource errors."
     ::= {phivEndCountEntry 14 }

-- additional End System objects

phivEndMaxLinks OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum active logical
         link count allowed for the executor."
     ::= { end 3 }

phivEndNSPVers OBJECT-TYPE
     SYNTAX DisplayString (SIZE (0..255))
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "This read-only parameter represents the version number
         of the node End Communication S/W. The format is
         version number, ECO, and user ECO, e.g., 4.1.0"
     ::= { end 4 }

phivEndRetransmitFactor OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum number of times the
         source End Communication at the executor node will
         restart the retransmission timer when it expires. If
         the number is exceeded, Session Control disconnects the
         logical link for the user."
     ::= { end 5 }

phivEndDelayFact OBJECT-TYPE
     SYNTAX INTEGER (1..255)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This is the number by which to multiply one sixteenth
         of the estimated round trip delay to a node to set the
         retransmission timer to that node."
     ::= { end 6 }

phivEndDelayWeight OBJECT-TYPE
     SYNTAX INTEGER (1..255)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This number represents the weight to apply to a
         current round trip delay estimate to a remote node
         when updating the estimated round trip delay to a node.
         On some systems the number must be 1 less than a power
         of 2 for computational efficiency."
     ::= { end 7 }

phivEndInactivityTimer OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum duration of inactivity
         (no data in either direction) on a logical link before
         the node checks to see if the logical link still works.
         If no activity occurs within the minimum number of
         seconds, End Communication generates artificial
         traffic to test the link (End Communication
         specification)."
     ::= { end 8 }

phivEndCountZeroCount OBJECT-TYPE
     SYNTAX INTEGER {
         other (1),
         reset (2)
     }
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "When this value is set to 2, all of the counters in
         the End System Counter Table are set to zero."
     ::= { end 9 }

phivEndMaxLinksActive OBJECT-TYPE
     SYNTAX PhivCounter (0..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the high water mark for the
         number of links that were active at any one time."
     ::= { end 10 }

-- Routing Layer Group

-- The implementation of the Routing Layer Group is mandatory for
-- all systems that implement level 1 routing layer
-- communications.

phivRouteBroadcastRouteTimer OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value determines the maximum time in seconds
          allowed between Routing updates on Ethernet
          circuits. When this timer expired before a routing
          update occurs, a routing update is forced.  With a
          standard calculation, Routing also uses this timer
          to enforce a minimum delay between routing updates."
     ::= { routing 1 }

phivRouteBuffSize OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This parameter value determines the maximum size of
          a Routing message. It therefore determines the maximum
          size message that can be forwarded.  This size includes
          protocol overhead down to and including the End
          Communication layer, plus a constant value of 6. (This
          value of 6 is included to provide compatibility with
          the parameter definition in Phase III, which included
          the Routing overhead.) It does not include Routing or
          Data link overhead (except for the constant value of
          6). There is one buffer size for all circuits.

          NOTE: The BUFFER SIZE defines the maximum size messages
          that the Routing layer can forward. The SEGMENT BUFFER
          SIZE (defined below) defines the maximum size messages
          that the End Communication layer can transmit or
          receive. The SEGMENT BUFFER SIZE is always less than
          or equal to the BUFFER SIZE. Normally the two
          parameters will be equal. They may be different to
          allow the network manager to alter buffer sizes
          on all nodes without interruption of service. They both
          include an extra 6 bytes for compatibility with Phase
          III."
     ::= { routing 2 }

phivRouteRoutingVers OBJECT-TYPE
     SYNTAX DisplayString (SIZE (0..255))
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "This read-only parameter identifies the executor node's
         Routing version number.  The format is version number,
         ECO, and user ECO, e.g., 4.1.0"
     ::= { routing 3 }

phivRouteMaxAddr OBJECT-TYPE
     SYNTAX INTEGER (1..1023)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the largest node number and,
         therefore, number of nodes that can be known about
         by the executor node's home area."
     ::= { routing 4 }

phivRouteMaxBdcastNonRouters OBJECT-TYPE
     SYNTAX INTEGER (0..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum total number of
         nonrouters the executor node can have on its Ethernet
         circuits."
     ::= { routing 5 }

phivRouteMaxBdcastRouters OBJECT-TYPE
     SYNTAX INTEGER (0..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum total number of
         routers the executor node can have on its Ethernet
         circuits."
     ::= { routing 6 }

phivRouteMaxBuffs OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum number of transmit
         buffers that Routing may use for all circuits."
     ::= { routing 7 }

phivRouteMaxCircuits OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum number of Routing
         circuits that the executor node can know about."
     ::= { routing 8 }

phivRouteMaxCost OBJECT-TYPE
     SYNTAX INTEGER (1..1022)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum total path cost
         allowed from the executor to any node within an area.
         The path cost is the sum of the circuit costs along
         a path between two nodes. This parameter defines the
         point where the executor node's Routing routing
         decision algorithm declares another node unreachable
         because the cost of the least costly path to the
         other node is excessive. For correct operation, this
         parameter must not be less than the maximum path cost
         of the network."
     ::= { routing 9 }

phivRouteMaxHops OBJECT-TYPE
     SYNTAX INTEGER (1..30)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum number of routing hops
         allowable from the executor to any other reachable node
         within an area. (A hop is the logical distance over a
         circuit between two adjacent nodes.) This parameter
         defines the point where the executor node's Routing
         routing decision algorithm declares another node
         unreachable because the length of the shortest path
         between the two nodes is too long. For correct
         operation, this parameter must not be less than the
         network diameter. (The network diameter is the
         reachability distance between the two nodes of the
         network having the greatest reachability distance,
         where reachability distance is the length the shortest
         path between a given pair of nodes.)"
     ::= { routing 10 }

phivRouteMaxVisits OBJECT-TYPE
     SYNTAX INTEGER (1..63)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value represents the maximum number of nodes a
         message coming into the executor node can have visited.
         If the message is not for this node and the MAXIMUM
         VISITS number is exceeded, the message is discarded.
         The MAXIMUM VISITS parameter defines the point where
         the packet lifetime control algorithm discards
         a packet that has traversed too many nodes. For correct
         operation, this parameter must not be less than the
         maximum path length of the network. (The maximum path
         length is the routing distance between the two nodes of
         the network having the greatest routing distance, where
         routing distance is the length of the least costly
         path between a given pair of nodes.)"
     ::= { routing 11 }

phivRouteRoutingTimer OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This value determines the maximum time in seconds
         allowed between Routing updates on non-Ethernet
         circuits. When this timer expires before a routing
         update occurs, a routing update is forced."
     ::= { routing 12 }

phivRouteSegBuffSize OBJECT-TYPE
     SYNTAX INTEGER (1..65535)
     ACCESS read-write
     STATUS mandatory
     DESCRIPTION
         "This parameter value determines the maximum size of an
         end-to-end segment. The size is a decimal integer in
         the range 1-65535. This size is in bytes. This size
         includes protocol overhead down to and including the
         End Communication layer, plus a constant value of 6.
         (This value of 6 is included to provide compatibility
         with the BUFFER SIZE parameter definition.) It does not
         include Routing or Data link overhead (except for the
         constant value of 6)."
     ::= { routing 13 }

phivRouteType OBJECT-TYPE
     SYNTAX INTEGER {
         routing-III (1),
         nonrouting-III (2),
         area (3),
         routing-IV (4),
         nonrouting-IV (5)
     }
     ACCESS read-only
     STATUS obsolete
     DESCRIPTION
         "This parameter indicates the type of the executor
         node. The node-type is one of the following:

         routing-III
         nonrouting-III
         routing-IV
         ronrouting-IV
         area

         A routing node has full routing capability. A
         nonrouting node contains a subset of the Routing
         routing modules. The III and IV indicate the DNA
         phase of the node. Nonrouting nodes can deliver
         and receive packets to and from any node, but cannot
         route packets from other nodes through to other nodes.
         An area node routes between areas. Refer to the Routing
         specification for details.
         For adjacent nodes, this is a read-only parameter that
         indicates the type of the reachable adjacent node.
         NOTE: The ROUTING-III and NONROUTING-III values are
         incremented by one compared to the standard DECnet
         values in order to maintain compliance with RFC 1155)"
     ::= { routing 14 }

phivRouteCountAgedPktLoss OBJECT-TYPE
     SYNTAX PhivCounter (0..127)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of aged packet losses."
     ::= { routing 15 }

phivRouteCountNodeUnrPktLoss OBJECT-TYPE
     SYNTAX PhivCounter (0..65535)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of node unreachable packet losses."
     ::= { routing 16 }

phivRouteCountOutRngePktLoss OBJECT-TYPE
     SYNTAX PhivCounter (0..127)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of node out-of-range packet losses."
     ::= { routing 17 }

phivRouteCountOverSzePktLoss OBJECT-TYPE
     SYNTAX PhivCounter (0..127)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of Oversized packet losses."
     ::= { routing 18 }

phivRouteCountPacketFmtErr OBJECT-TYPE
     SYNTAX PhivCounter (0..127)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of packet format errors."
     ::= { routing 19 }

phivRouteCountPtlRteUpdtLoss OBJECT-TYPE
     SYNTAX PhivCounter (0..127)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of partial routing update losses."
     ::= { routing 20 }

phivRouteCountVerifReject OBJECT-TYPE
     SYNTAX PhivCounter (0..127)
     ACCESS read-only
     STATUS mandatory
     DESCRIPTION
         "Number of verification rejects."
     ::= { routing 21 }

-- Level 1 Routing Table

phivLevel1RouteTable OBJECT-TYPE
     SYNTAX SEQUENCE OF PhivLevel1RouteEntry
     ACCESS not-accessible
     STATUS mandatory
     DESCRIPTION
         "Information about the currently known DECnet Phase
         IV Routes."
     ::= { routing 22 }

phivLevel1RouteEntry OBJECT-TYPE
     SYNTAX PhivLevel1RouteEntry
     ACCESS not-accessible