sip-mib

很不错java的SNMP应用例子

       "The number of received SIP Level 2 PDUs that are
       BOMs for which an active receive process is
       already started."
    ::= { sipL2Entry 7 }

sipL2BomOrSSMsMIDErrors  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of received SIP Level 2 PDUs that are
       SSMs with a MID not equal to zero or are BOMs with
       MIDs equal to zero."
    ::= { sipL2Entry 8 }

sipL2EomsMIDErrors  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of received SIP Level 2 PDUs that are
       EOMs for which there is no active receive process
       for the MID (i.e., the receipt of an EOM which
       does not correspond to a BOM) OR the EOM has a MID
       equal to zero."
    ::= { sipL2Entry 9 }


-- The SIP PLCP Group

sipPLCP OBJECT IDENTIFIER ::= { sip 3 }


-- The DS1 PLCP Group

sipDS1PLCPTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SipDS1PLCPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table contains SIP DS1 PLCP parameters and
       state variables, one entry per SIP port."
    ::= { sipPLCP 1 }

sipDS1PLCPEntry  OBJECT-TYPE
    SYNTAX      SipDS1PLCPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This list contains SIP DS1 PLCP parameters and
       state variables."
    INDEX   { sipDS1PLCPIndex }
    ::= { sipDS1PLCPTable 1 }

SipDS1PLCPEntry  ::= SEQUENCE {
    sipDS1PLCPIndex       IfIndex,
    sipDS1PLCPSEFSs       Counter32,
    sipDS1PLCPAlarmState  INTEGER,
    sipDS1PLCPUASs        Counter32
    }

sipDS1PLCPIndex  OBJECT-TYPE
    SYNTAX      IfIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of this object identifies the
       interface for which this entry contains management
       information. "
    ::= { sipDS1PLCPEntry 1 }

sipDS1PLCPSEFSs OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "A DS1 Severely Errored Framing Second (SEFS) is a
       count of one-second intervals containing one or
       more SEF events.  A Severely Errored Framing (SEF)
       event is declared when an error in the A1 octet
       and an error in the A2 octet of a framing octet
       pair (i.e., errors in both framing octets), or two
       consecutive invalid and/or nonsequential Path
       Overhead Identifier octets are detected."
    ::= { sipDS1PLCPEntry 2 }

sipDS1PLCPAlarmState OBJECT-TYPE
    SYNTAX  INTEGER     {
                noAlarm (1),
                receivedFarEndAlarm (2),
                incomingLOF (3)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This variable indicates if there is an alarm
       present for the DS1 PLCP.  The value
       receivedFarEndAlarm means that the DS1 PLCP has
       received an incoming Yellow Signal, the value
       incomingLOF means that the DS1 PLCP has declared a
       loss of frame (LOF) failure condition, and the
       value noAlarm means that there are no alarms
       present.  See TR-TSV-000773 for a description of
       alarm states."
    ::= { sipDS1PLCPEntry 3 }

sipDS1PLCPUASs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The counter associated with the number of
       Unavailable Seconds, as defined by TR-TSV-000773,
       encountered by the PLCP."
    ::= { sipDS1PLCPEntry 4 }


-- The DS3 PLCP Group

sipDS3PLCPTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SipDS3PLCPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table contains SIP DS3 PLCP parameters and
       state variables, one entry per SIP port."
    ::= { sipPLCP 2 }

sipDS3PLCPEntry  OBJECT-TYPE
    SYNTAX      SipDS3PLCPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This list contains SIP DS3 PLCP parameters and
       state variables."
    INDEX   { sipDS3PLCPIndex }
    ::= { sipDS3PLCPTable 1 }

SipDS3PLCPEntry  ::= SEQUENCE {
    sipDS3PLCPIndex       IfIndex,
    sipDS3PLCPSEFSs       Counter32,
    sipDS3PLCPAlarmState  INTEGER,
    sipDS3PLCPUASs        Counter32
    }

sipDS3PLCPIndex  OBJECT-TYPE
    SYNTAX      IfIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of this object identifies the
       interface for which this entry contains management
       information.  "
    ::= { sipDS3PLCPEntry 1 }

sipDS3PLCPSEFSs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "A DS3 Severely Errored Framing Second (SEFS) is a
       count of one-second intervals containing one or
       more SEF events.  A Severely Errored Framing (SEF)
       event is declared when an error in the A1 octet
       and an error in the A2 octet of a framing octet
       pair (i.e., errors in both framing octets), or two
       consecutive invalid and/or nonsequential Path
       Overhead Identifier octets are detected."
    ::= { sipDS3PLCPEntry 2 }

sipDS3PLCPAlarmState OBJECT-TYPE
    SYNTAX  INTEGER     {
                noAlarm (1),
                receivedFarEndAlarm (2),
                incomingLOF (3)
            }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This variable indicates if there is an alarm
       present for the DS3 PLCP.  The value
       receivedFarEndAlarm means that the DS3 PLCP has
       received an incoming Yellow Signal, the value
       incomingLOF means that the DS3 PLCP has declared a
       loss of frame (LOF) failure condition, and the
       value noAlarm means that there are no alarms
       present.  See TR-TSV-000773 for a description of
       alarm states."
    ::= { sipDS3PLCPEntry 3 }

sipDS3PLCPUASs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The counter associated with the number of
       Unavailable Seconds, as defined by TR-TSV-000773,
       encountered by the PLCP."
    ::= { sipDS3PLCPEntry 4 }


-- The SMDS Applications group
-- Applications that have been identified for this group are:

--          * IP-over-SMDS (details are specified in RFC 1209)

smdsApplications OBJECT IDENTIFIER ::= { sip 4 }

ipOverSMDS OBJECT IDENTIFIER ::= { smdsApplications 1 }

-- Although the objects in this group are read-only, at the
-- agent's discretion they may be made read-write so that the
-- management station, when appropriately authorized, may
-- change the addressing information related to the
-- configuration of a logical IP subnetwork implemented on
-- top of SMDS.

-- This table is necessary to support RFC1209 (IP-over-SMDS)
-- and gives information on the Group Addresses and ARP
-- Addresses used in the Logical IP subnetwork.
-- One SMDS address may be associated with multiple IP
-- addresses.  One SNI may be associated with multiple LISs.

ipOverSMDSTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpOverSMDSEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The table of addressing information relevant to
       this entity's IP addresses."
    ::= { ipOverSMDS 1 }

ipOverSMDSEntry OBJECT-TYPE
    SYNTAX      IpOverSMDSEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The addressing information for one of this
       entity's IP addresses."
    INDEX   { ipOverSMDSIndex, ipOverSMDSAddress }
    ::= { ipOverSMDSTable 1 }

IpOverSMDSEntry ::=
    SEQUENCE {
       ipOverSMDSIndex       IfIndex,
       ipOverSMDSAddress     IpAddress,
       ipOverSMDSHA          SMDSAddress,
       ipOverSMDSLISGA       SMDSAddress,
       ipOverSMDSARPReq      SMDSAddress
       }

ipOverSMDSIndex OBJECT-TYPE
    SYNTAX      IfIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of this object identifies the
       interface for which this entry contains management
       information. "
    ::= { ipOverSMDSEntry 1 }

ipOverSMDSAddress OBJECT-TYPE
     SYNTAX      IpAddress
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "The IP address to which this entry's addressing
       information pertains."
    ::= { ipOverSMDSEntry 2 }

ipOverSMDSHA OBJECT-TYPE
    SYNTAX      SMDSAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The SMDS Individual address of the IP station."
    ::= { ipOverSMDSEntry 3 }

ipOverSMDSLISGA OBJECT-TYPE
    SYNTAX      SMDSAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The SMDS Group Address that has been configured
       to identify the SMDS Subscriber-Network Interfaces
       (SNIs) of all members of the Logical IP Subnetwork
       (LIS) connected to the network supporting SMDS."
    ::= { ipOverSMDSEntry 4 }

ipOverSMDSARPReq OBJECT-TYPE
    SYNTAX      SMDSAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The SMDS address (individual or group) to which
       ARP Requests are to be sent."
    ::= { ipOverSMDSEntry 5 }


-- The SMDS Carrier Selection group

-- This group is used as a place holder
-- for carrier selection objects.

smdsCarrierSelection OBJECT IDENTIFIER ::= { sip 5 }


-- The SIP Error Log

sipErrorLog OBJECT IDENTIFIER ::= { sip 6 }

sipL3PDUErrorTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SipL3PDUErrorEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A table that contains the latest occurrence of
       the following syntactical SIP L3PDU errors:

       - Destination Address Field Format Error,

       The following pertains to the 60 least significant
       bits of the 64 bit address field.  The 60 bits
       contained in the address subfield can be used to
       represent addresses up to 15 decimal digits.  Each
       decimal digit shall be encoded into four bits
       using Binary Coded Decimal (BCD), with the most
       significant digit occurring left-most.  If not all
       15 digits are required, then the remainder of this
       field shall be padded on the right with bits set
       to one.  An error is considered to have occurred:
       a).  if the first four bits of the address
       subfield are not BCD, OR b).  if the first four
       bits of the address subfield are populated with
       the country code value 0001, AND the 40 bits which
       follow are not Binary Coded Decimal (BCD) encoded
       values of the 10 digit addresses, OR the remaining
       16 least significant bits are not populated with
       1's, OR c).  if the address subfield is not
       correct according to another numbering plan which
       is dependent upon the carrier assigning the
       numbers and offering SMDS.

       - Source Address Field Format Error,

       The description of this parameter is the same as
       the description of the Destination Address Field
       Format Error.
       - Invalid BAsize Field Value,

       An error is considered to have occurred when the
       BAsize field of an SIP L3PDU contains a value less
       that 32, greater than 9220 octets without the
       CRC32 field present, greater than 9224 octets with
       the CRC32 field present, or not equal to a
       multiple of 4 octets,

       - Invalid Header Extension Length Field Value,

       An error is considered to have occurred when the
       Header Extension Length field value is not equal
       3.

       - Invalid Header Extension - Element Length,

       An error is considered to have occurred when the
       Header Extension - Element Length is greater than
       12.

       - Invalid Header Extension - Version Element
       Position, Length, or Value,

       An error is considered to have occurred when a