sip-mib

很不错java的SNMP应用例子

SIP-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, Counter32,
   Integer32, IpAddress                     FROM SNMPv2-SMI
   TimeStamp, TEXTUAL-CONVENTION            FROM SNMPv2-TC
   MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
   transmission, ifIndex, mib-2             FROM RFC1213-MIB;

--  This is the MIB module for the SMDS Interface objects.

sipMIB MODULE-IDENTITY
    LAST-UPDATED "9403311818Z"
    ORGANIZATION "IETF Interfaces Working Group"
    CONTACT-INFO
      "        Tracy Brown
       Postal: Bell Communications Research
               331 Newman Springs Road
               P.O. Box 7020
               Red Bank, NJ  07701-7020
               US

          Tel: [phone]
          Fax: [phone]
       E-mail: [e-mail]

               Kaj Tesink
       Postal: Bell Communications Research
               331 Newman Springs Road
               P.O. Box 7020
               Red Bank, NJ  07701-7020
               US

          Tel: [phone]
          Fax: [phone]
       E-mail: [e-mail]."
    DESCRIPTION
         "The MIB module to describe
         SMDS interfaces objects."
    ::= { mib-2 36 }

SMDSAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS       current
    DESCRIPTION
        "The 60-bit SMDS address,
         preceded by 4 bits with the following values:
         1100 when representing an individual address
         1110 when representing a group address."
    SYNTAX  OCTET STRING (SIZE (8))

IfIndex ::= TEXTUAL-CONVENTION
  STATUS  current
  DESCRIPTION
    "The value of this object identifies the
    interface for which this entry contains
    management information.  The value of this
    object for a particular interface has the same
    value as the ifIndex object, defined in RFC
    1213, for the same interface."
  SYNTAX Integer32


sip     OBJECT IDENTIFIER ::= { transmission 31 }
sipMIBObjects   OBJECT IDENTIFIER ::= { sipMIB 1 }


-- The SIP Level 3 Group

sipL3Table  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SipL3Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table contains SIP L3 parameters and
       state variables, one entry per SIPL3 interface."
   ::= { sip 1 }

sipL3Entry  OBJECT-TYPE
    SYNTAX      SipL3Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This list contains SIP L3 parameters and
       state variables."
   INDEX   { sipL3Index }
   ::= { sipL3Table 1 }

SipL3Entry  ::= SEQUENCE {
    sipL3Index                        IfIndex,
    sipL3ReceivedIndividualDAs        Counter32,
    sipL3ReceivedGAs                  Counter32,
    sipL3UnrecognizedIndividualDAs    Counter32,
    sipL3UnrecognizedGAs              Counter32,
    sipL3SentIndividualDAs            Counter32,
    sipL3SentGAs                      Counter32,
    sipL3Errors                       Counter32,
    sipL3InvalidSMDSAddressTypes      Counter32,
    sipL3VersionSupport               Integer32
   }

sipL3Index  OBJECT-TYPE
    SYNTAX      IfIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of this object identifies the SIP
       L3 interface for which this entry contains
       management information. "
   ::= { sipL3Entry 1 }

sipL3ReceivedIndividualDAs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
-- Moved to ifTable
-- ifInUcastPkts defined in [9] must be used instead.
    DESCRIPTION
       "The total number of individually addressed SIP
       Level 3 PDUs received from the remote system
       across the SNI.  The total includes only
       unerrored L3PDUs."
   ::= { sipL3Entry 2 }

sipL3ReceivedGAs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
-- Moved to ifTable
-- ifInMulticastPkts defined in [9] must be used instead.
    DESCRIPTION
       "The total number of group addressed SIP Level 3
       PDUs received from the remote system across the
       SNI.  The total includes only unerrored L3PDUs."
   ::= { sipL3Entry 3 }

sipL3UnrecognizedIndividualDAs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
       "The number of SIP Level 3 PDUs received from the
       remote system with invalid or unknown individual
       destination addresses (Destination Address
       Screening violations are not included).  See SMDS
       Subscription MIB module."
    ::= { sipL3Entry 4 }

sipL3UnrecognizedGAs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
       "The number of SIP Level 3 PDUs received from the
       remote system with invalid or unknown group
       addresses.  (Destination Address Screening
       violations are not included).  See SMDS
       Subscription MIB module."
    ::= { sipL3Entry 5 }

sipL3SentIndividualDAs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
-- Moved to ifTable
-- ifOutUcastPkts defined in [9] must be used instead.
    DESCRIPTION
       "The number of individually addressed SIP Level 3
       PDUs that have been sent by this system across the
       SNI."
    ::= { sipL3Entry 6 }

sipL3SentGAs OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
-- Moved to ifTable
-- ifOutMulticastPkts defined in [9] must be used instead.
    DESCRIPTION
       "The number of group addressed SIP L3PDUs that
       have been sent by this system across the SNI."
    ::= { sipL3Entry 7 }

-- The total number of SIP L3PDU errors can be calculated as
-- (Syntactic errors + Semantic Service errors )
-- Syntactic errors include:
--    sipL3Errors
-- Latest occurrences of syntactic error types are logged in
--    sipL3PDUErrorTable.
-- Semantic Service errors include:

--    sipL3UnrecognizedIndividualDAs
--    sipL3UnrecognizedGAs
--    sipL3InvalidSMDSAddressTypes
-- Note that public networks supporting SMDS may discard
-- SIP L3PDUs due to subscription violations.  Related
-- managed objects are defined in Definitions of Managed
-- Objects for SMDS Subscription.

sipL3Errors OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
-- Moved to ifTable
-- ifInErrors defined in [9] must be used instead.
    DESCRIPTION
       "The total number of SIP Level 3 PDUs received
       from the remote system that were discovered to
       have errors (including protocol processing and bit
       errors but excluding addressing-related errors)
       and were discarded.  Includes both group addressed
       L3PDUs and L3PDUs containing an individual
       destination address."
    ::= { sipL3Entry 8 }

sipL3InvalidSMDSAddressTypes OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
-- Moved to ifTable
-- ifInUnknownProtos defined in [9] must be used instead.
    DESCRIPTION
       "The number of SIP Level 3 PDUs received from the
       remote system that had the Source or Destination
       Address_Type subfields, (the four most significant
       bits of the 64 bit address field), not equal to
       the value 1100 or 1110.  Also, an error is
       considered to have occurred if the Address_Type
       field for a Source Address, the four most
       significant bits of the 64 bits, is equal to 1110
       (a group address)."
    ::= { sipL3Entry 9 }

sipL3VersionSupport  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "A value which indicates the version(s) of SIP
       that this interface supports.  The value is a sum.
       This sum initially takes the value zero.  For each
       version, V, that this interface supports, 2 raised
       to (V - 1) is added to the sum. For example, a
       port supporting versions 1 and 2 would have a
       value of (2^(1-1)+2^(2-1))=3.  The
       sipL3VersionSupport is effectively a bit mask with
       Version 1 equal to the least significant bit
       (LSB)."
    ::= { sipL3Entry 10 }


-- The SIP Level 2 Group

sipL2Table  OBJECT-TYPE
    SYNTAX      SEQUENCE OF SipL2Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table contains SIP L2PDU parameters and
       state variables, one entry per SIP L2 interface."
    ::= { sip 2 }

sipL2Entry  OBJECT-TYPE
    SYNTAX      SipL2Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This list contains SIP L2 parameters and state
       variables."
    INDEX   { sipL2Index }
    ::= { sipL2Table 1 }

SipL2Entry  ::= SEQUENCE {
    sipL2Index                     IfIndex,
    sipL2ReceivedCounts            Counter32,
    sipL2SentCounts                Counter32,
    sipL2HcsOrCRCErrors            Counter32,
    sipL2PayloadLengthErrors       Counter32,
    sipL2SequenceNumberErrors      Counter32,
    sipL2MidCurrentlyActiveErrors  Counter32,
    sipL2BomOrSSMsMIDErrors        Counter32,
    sipL2EomsMIDErrors             Counter32
  }

sipL2Index  OBJECT-TYPE
    SYNTAX      IfIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The value of this object identifies the SIP
       interface for which this entry contains management
       information."
    ::= { sipL2Entry 1 }

sipL2ReceivedCounts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of SIP Level 2 PDUs received from the
       remote system across the SNI. The total includes
       only unerrored L2PDUs."
    ::= { sipL2Entry 2 }

sipL2SentCounts OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of SIP Level 2 PDUs that have been
       sent by this system across the SNI."
    ::= { sipL2Entry 3 }

-- The following error types are counted, and
-- preclude sipL2ReceivedCounts to be incremented:
--    sipL2HcsOrCRCErrors
--    sipL2PayloadLengthErrors
--    sipL2SequenceNumberErrors
--    sipL2BomOrSSMsMIDErrors
--    sipL2EomsMIDErrors
-- The receipt of SIP Level 2 PDUs which are BOMs and
-- for with a MID that is already active will cause
-- sipL2MidCurrentlyActiveErrors to increment.
-- Any already accumulated (correct) segmentation
-- units are discarded.The sipL2ReceivedCounts
-- is incremented by 1. Thus,
-- sipL2ReceivedCounts defines the number of
-- correct SIP Level 2 PDUs delivered to the reassembly
-- process.

sipL2HcsOrCRCErrors  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of received SIP Level 2 PDUs that were
       discovered to have either a Header Check Sequence
       error or a Payload CRC violation."
    ::= { sipL2Entry 4 }

sipL2PayloadLengthErrors  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of received SIP Level 2 PDUs that had
       Payload Length errors that fall in the following
       specifications:
       - SSM L2_PDU payload length field value less
       - than 28 octets or greater than 44 octets,

       - BOM or COM L2_PDU payload length field not
       - equal to 44 octets,
       - EOM L2_PDU payload length field value less
       - than 4 octets or greater than 44 octets."
    ::= { sipL2Entry 5 }

sipL2SequenceNumberErrors  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "The number of received SIP Level 2 PDUs that had
       a sequence number within the L2PDU not equal to
       the expected sequence number of the SMDS SS
       receive process."
    ::= { sipL2Entry 6 }

sipL2MidCurrentlyActiveErrors  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION