rfc1229-mib

很不错java的SNMP应用例子

RFC1229-MIB DEFINITIONS ::= BEGIN


--        Extensions to MIB-II's Generic Interface Table

IMPORTS
        experimental, Counter         FROM RFC1155-SMI
        DisplayString, PhysAddress    FROM RFC1213-MIB
        OBJECT-TYPE                   FROM RFC-1212;



ifExtensions  OBJECT IDENTIFIER ::= { experimental 6 }


--   Generic Interface Extension Table
--
--  This group of objects is mandatory for all types of
--  subnetwork interface.

ifExtnsTable  OBJECT-TYPE
        SYNTAX SEQUENCE OF IfExtnsEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
               "A list of interfaces extension entries.
                The number of entries is given by the value
                of ifNumber, defined in [4,6]."
        ::= { ifExtensions 1 }

ifExtnsEntry  OBJECT-TYPE
        SYNTAX IfExtnsEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
     "An extension to the interfaces entry,
                defined in [4,6], containing additional
                objects at the subnetwork layer and below
                for a particular interface."
        INDEX  { ifExtnsIfIndex }
        ::= { ifExtnsTable 1 }

IfExtnsEntry ::=
        SEQUENCE {
            ifExtnsIfIndex
                INTEGER,
            ifExtnsChipSet
                OBJECT IDENTIFIER,
            ifExtnsRevWare
                DisplayString,
            ifExtnsMulticastsTransmittedOks
                Counter,
            ifExtnsBroadcastsTransmittedOks
                Counter,
            ifExtnsMulticastsReceivedOks
                Counter,
            ifExtnsBroadcastsReceivedOks
                Counter,
            ifExtnsPromiscuous
                INTEGER
        }

ifExtnsIfIndex  OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
               "The value of this object identifies the
                interface for which this entry contains
                extended management information.  The value
                of this object for a particular interface
                has the same value as the ifIndex object,
                defined in [4,6], for the same interface."
        ::= { ifExtnsEntry 1 }

ifExtnsChipSet  OBJECT-TYPE
        SYNTAX OBJECT IDENTIFIER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
               "This object identifies the hardware chip
                set being used in the interface.  The
                assignment of OBJECT IDENTIFIERs to various
                types of hardware chip sets is managed
                by the IANA.  If the hardware chip set is
                unknown, the object identifier

                unknownChipSet OBJECT IDENTIFIER ::= { 0 0 }

                is returned.  Note that unknownChipSet is a
                syntactically valid object identifier, and
                any conformant implementation of ASN.1 and
                the BER must be able to generate and
                recognize this value."
        ::= { ifExtnsEntry 2 }

ifExtnsRevWare  OBJECT-TYPE
        SYNTAX DisplayString (SIZE (0..255))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
               "An arbitrary octet string that describes
                the firmware version of this interface.
                It is intended that this should be human
                readable.  It must only contain ASCII
                printable characters.  Typically this
                will be the firmware version of the main
                interface software."
        ::= { ifExtnsEntry 3 }

ifExtnsMulticastsTransmittedOks OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
               "The count of frames successfully
                transmitted to a subnetwork or link-layer
                multicast destination address other than a
                broadcast address.  For a MAC layer protocol,
                this includes both Group and Functional
                addresses."
        ::= { ifExtnsEntry 4 }

ifExtnsBroadcastsTransmittedOks OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
               "The count of frames successfully
                transmitted to a subnetwork or link-layer
                broadcast addresses.  It does not include
                frames sent to a multicast address."
        ::= { ifExtnsEntry 5 }

ifExtnsMulticastsReceivedOks OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
               "The count of frames successfully received
                that are directed to an active subnetwork
                or link-layer multicast address (for a MAC
                layer protocol, this includes both Group and
                Functional addresses). This does not include
                frames directed to a broadcast address, nor
                frames received with errors."
        ::= { ifExtnsEntry 6 }

ifExtnsBroadcastsReceivedOks OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
               "The count of frames successfully received
                that are directed to a subnetwork or
                link-layer broadcast address.  This does not
                include frames received with errors."
        ::= { ifExtnsEntry 7 }

ifExtnsPromiscuous  OBJECT-TYPE
        SYNTAX INTEGER {
                    true(1),
                    false(2)
               }
        ACCESS read-only  -- Note: agent implementors are
                          -- encouraged to extend this
                          -- access to read-write if that
                          -- makes sense in their agent.
        STATUS mandatory
        DESCRIPTION
               "This object has a value of false(2) if
                this interface only accepts packets/frames
                that are addressed to this station. This
                object has a value of true(1) when the
                station accepts all packets/frames
                transmitted on the media.  The value
                true(1) is only legal on certain types of
                media.  If legal, setting this object to a
                value of true(1) may require the interface
                to be reset before becoming effective."
        ::= { ifExtnsEntry 8 }

--
--    Generic Interface Test Table
--
-- This group of objects is optional, but if the table is
-- implemented, all objects in the table must be implemented.

ifExtnsTestTable   OBJECT-TYPE

        SYNTAX  SEQUENCE OF IfExtnsTestEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains one entry per interface."
        ::= { ifExtensions 2 }

ifExtnsTestEntry OBJECT-TYPE
        SYNTAX  IfExtnsTestEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "An entry containing objects for invoking
                 tests on an interface."
        INDEX   { ifExtnsTestIfIndex }
        ::= { ifExtnsTestTable 1 }

IfExtnsTestEntry ::=
        SEQUENCE {
            ifExtnsTestIfIndex
                INTEGER,
            ifExtnsTestCommunity
                OCTET STRING,
            ifExtnsTestRequestId
                INTEGER,
            ifExtnsTestType
                OBJECT IDENTIFIER,
            ifExtnsTestResult
                INTEGER,
            ifExtnsTestCode
                OBJECT IDENTIFIER
        }

ifExtnsTestIfIndex  OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
               "The value of this object identifies the
                interface for which this entry contains
                information on interface tests.  The value