ebn-mib

很不错java的SNMP应用例子

 ebnSubnetSearchTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnSubnetSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "This table contains one entry for each fully qualified LU
          name for which an associated subnet routing list has been
          defined.  An entry in this table contains general
          characteristics of the subnet search routing list for an
          LU name.  The routing list itself is represented by a set
          of contiguous entries in the ebnSearchTable."

      ::= { ebnSubnetRoutingList 1 }

 ebnSubnetSearchEntry OBJECT-TYPE
      SYNTAX EbnSubnetSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "An entry for the ebnSubnetSearchTable.  The entry
          represents the configured parameters the EBN uses when it
          is determining how to search for the LU identified by the
          ebnSubnetSearchLuName object."

      INDEX { ebnSubnetSearchLuName }

      ::= { ebnSubnetSearchTable 1 }

 EbnSubnetSearchEntry ::= SEQUENCE {
         ebnSubnetSearchLuName   SnaNAUWildcardName,
         ebnSubnetSearchDynamics INTEGER,
         ebnSubnetSearchOrdering INTEGER   }

 ebnSubnetSearchLuName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network LU name."

      ::= { ebnSubnetSearchEntry 1 }

 ebnSubnetSearchDynamics OBJECT-TYPE
      SYNTAX INTEGER { none(1),
                       limited (2),
                       full (3) }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "Indicates whether an EBN may add dynamic entries to a
          subnetwork routing list.  none(1) means no entries may be
          added to the subnetwork routing list.  limited(2) means
          only likely entries may be added to the subnetwork routing
          list.  full(3) means all native extended border nodes and
          adjacent, non-native EBNs and NNs will be added to the
          subnetwork routing list."

      ::= { ebnSubnetSearchEntry 2 }

 ebnSubnetSearchOrdering OBJECT-TYPE
      SYNTAX INTEGER{ priority(1),
                      defined(2) }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "Indicates whether an EBN may reorder a subnetwork routing
          list so that entries which are more likely to be successful
          move to the top of the subnetwork routing list and entries
          which are more likely to be unsuccessful move to the bottom
          of the list.
          The following values are defined:

             - priority(1):  Entries may be reordered.
             - defined(2):   Entries must not be reordered."

      ::= { ebnSubnetSearchEntry 3 }

 -- Border node search table

 ebnSearchTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "This table indicates the CONFIGURED list of control points
          to which the EBN sends Locate searches for a given fully
          qualified LU name.  Each entry in the table indicates one
          control point that should be included in a multi-subnet
          search for a particular LU name."

      ::= { ebnSubnetRoutingList 2 }

 ebnSearchEntry OBJECT-TYPE
      SYNTAX EbnSearchEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "An entry in the ebnSearchTable.  An entry can exist in
          this table only if an entry exists in the
          ebnSubnetSearchTable with an ebnSubnetSearchLuName value
          matching this entry's ebnSearchLuName.
          For a given ebnSearchLuName value, the ordering of entries
          provides by the ebnSearchIndex values corresponds to the
          order in which the control points to be searched appear in
          the CONFIGURED search list for the ebnSearchLuName."

      INDEX { ebnSearchLuName,
              ebnSearchIndex }

      ::= { ebnSearchTable 1 }

 EbnSearchEntry ::= SEQUENCE {
         ebnSearchLuName  SnaNAUWildcardName,
         ebnSearchIndex   Unsigned32,
         ebnSearchCpName  DisplayString,
         ebnSearchSNVC    Unsigned32  }

 ebnSearchLuName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network LU name.  If this object has the
          same value as the ebnSubnetSearchLuName object, then the
          two objects are referring to the same LU."

      ::= { ebnSearchEntry 1 }

 ebnSearchIndex OBJECT-TYPE
      SYNTAX Unsigned32
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Secondary index enumerating the CONFIGURED order in which
          a search is forwarded to CPs for a particular LU name.  The
          order for an actual search is determined dynamically by the
          EBN, based on this configured information and on other
          factors, including whether search dynamics and search
          ordering are enabled.  Information on these last two settings
          is available in, respectively, the ebnSubnetSearchDynamics
          and ebnSubnetSearch ordering objects."

      ::= { ebnSearchEntry 2 }

 ebnSearchCpName OBJECT-TYPE
      SYNTAX DisplayString(SIZE(1..17))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "This object specifies the CP(s) to which a search should be
          forwarded.  It either follows the SnaNAUWildcardName textual
          convention or takes one of the following special formats:

             '*' indicates that all native EBNs and all adjacent non-
             native EBNs and NNs may be added to the routing list
             dynamically,

             '*SELF' indicates that the EBN should search itself and
             its native subnetwork at this time during the
             cross-subnet search,

             '*EBNS' indicates all native EBNs.

          Because the characters allowed in a CP name come from a
          restricted character set, and because the three formats
          listed here use no special characters, this object is not
          subject to internationalization."

      ::= { ebnSearchEntry 3 }

 ebnSearchSNVC OBJECT-TYPE
      SYNTAX Unsigned32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The maximum number of subnets a Locate search procedure may
          traverse.  "

      ::= { ebnSearchEntry 4 }

 -- *******************************************************************
 -- HPR Extended Border Node Intermediate Session Group
 -- The hbnIsInTable is a sparse extension to the appnIsInTable.
 -- For sessions that use back-to-back RTP connections in an HBN,
 -- this table provides the network connection endpoint identifier
 -- (NceId) and the transport connection identifier (Tcid) for the
 -- second RTP connection.
 -- *******************************************************************

 hbn                     OBJECT IDENTIFIER ::= { ebnObjects 6 }

 hbnIsInTable OBJECT-TYPE
      SYNTAX SEQUENCE OF HbnIsInEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The HBN Intermediate Session table."
      ::= { hbn 1}

 hbnIsInEntry OBJECT-TYPE
      SYNTAX HbnIsInEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Entry of the HBN Intermediate Session Table.  An entry
          exists in this table for every intermediate session being
          routed between back-to-back RTP connections in the HBN.

          When an entry for a session exists in this table, the
          NceIds and Tcids for the back-to-back RTP connections are
          made available in the following four objects:

             RTP connection in the direction of the PLU:
                - NceId:  appnIsInRtpNceId (in the APPN MIB)
                - Tcid:   appnIsinRtpTcid (in the APPN MIB).

             RTP connection in the direction of the SLU:
                - NceId:  hbnIsInRtpNceId (in this table)
                - Tcid:   hbnIsInRtpTcid (in this table)."

      INDEX { hbnIsInFqCpName,
              hbnIsInPcid }

 ::= { hbnIsInTable 1 }

 HbnIsInEntry ::= SEQUENCE {
         hbnIsInFqCpName    SnaControlPointName,
         hbnIsInPcid        OCTET STRING,
         hbnIsInRtpNceId    OCTET STRING,
         hbnIsInRtpTcid     OCTET STRING }

 hbnIsInFqCpName OBJECT-TYPE
      SYNTAX SnaControlPointName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The network-qualified control point name of the node at
          which the session and PCID originated.  For APPN and LEN
          nodes, this is either the CP name of the APPN node at
          which the origin LU is located or the CP name of the NN
          serving the LEN node at which the origin LU is located.

          If this object has the same value as the appnIsInFqCpName
          object in the APPN MIB, then the two objects are referring
          to the same APPN control point."
      ::= { hbnIsInEntry 1 }

 hbnIsInPcid OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The procedure correlation identifier (PCID) of a session.
          It is an 8-octet value.

          If this object has the same value as the appnIsInPcid object
          in the APPN MIB, and if the corresponding hbnIsInFqCpName
          object has the same value as the corresponding
          appnIsInFqCpName object, then the entries indexed by these
          objects are referring to the same session."

      ::= { hbnIsInEntry 2 }

 hbnIsInRtpNceId OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(1..8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The HPR local Network Connection Endpoint of the session in
          the direction of the SLU."

      ::= { hbnIsInEntry 3 }

 hbnIsInRtpTcid OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The RTP connection local TCID of the session in the direction
          of the SLU."

      ::= { hbnIsInEntry 4 }

 -- *******************************************************************
 -- Conformance Statement
 -- *******************************************************************
 ebnConformance          OBJECT IDENTIFIER ::= { ebnMIB 2 }

 ebnCompliances          OBJECT IDENTIFIER ::= { ebnConformance 1 }
 ebnGroups               OBJECT IDENTIFIER ::= { ebnConformance 2 }

 -- Compliance statements
 ebnCompliance     MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
       "The compliance statement for the SNMPv2 entities which
       implement the ebnMIB."

   MODULE   -- this module

   --  Unconditionally mandatory groups
       MANDATORY-GROUPS {
                 ebnDirectoryGroup,
                 ebnIsRscvGroup,
                 ebnDirectoryConfigGroup,
                 ebnCosMappingGroup,
                 ebnSubnetRoutingListGroup }

   -- Conditionally mandatory groups
      GROUP hbnIsInGroup
      DESCRIPTION
          "The hbnIsInGroup is mandatory only for HPR extended border
          nodes."

      ::= {ebnCompliances 1 }

 -- Group definitions
 ebnDirectoryGroup OBJECT-GROUP
      OBJECTS { ebnDirSubnetAffiliation }
      STATUS current
      DESCRIPTION
          "The EBN-related directory objects."

      ::= { ebnGroups 1 }


 ebnIsRscvGroup OBJECT-GROUP
      OBJECTS { ebnIsRscvDestinationRoute,
                ebnIsRscvDestinationCos }
      STATUS current
      DESCRIPTION
          "Two objects representing RSCV and class of service
          information saved by an EBN."

      ::= { ebnGroups 2 }

 ebnDirectoryConfigGroup OBJECT-GROUP
      OBJECTS { ebnSearchCacheTime,
                ebnMaxSearchCache,
                ebnDefaultSubnetVisitCount }
      STATUS current
      DESCRIPTION
          "The EBN Directory Configuration Group."

      ::= { ebnGroups 3 }

 ebnCosMappingGroup OBJECT-GROUP
      OBJECTS {  ebnCosMapNativeCos }
      STATUS current
      DESCRIPTION
          "The EBN COS Mapping Group."

      ::= { ebnGroups 4 }

 ebnSubnetRoutingListGroup OBJECT-GROUP
      OBJECTS { ebnSubnetSearchDynamics,
                ebnSubnetSearchOrdering,
                ebnSearchCpName,
                 ebnSearchSNVC }
      STATUS current
      DESCRIPTION
          "The Subnet Routing List Group."

      ::= { ebnGroups 5 }

 hbnIsInGroup OBJECT-GROUP
      OBJECTS { hbnIsInRtpNceId, hbnIsInRtpTcid }
      STATUS current
      DESCRIPTION
          "The HBN-related Intermediate Session Objects."

      ::= { ebnGroups 6 }

END