ebn-mib

很不错java的SNMP应用例子

EBN-MIB DEFINITIONS ::= BEGIN

 IMPORTS
         MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
                     FROM SNMPv2-SMI
         MODULE-COMPLIANCE, OBJECT-GROUP
                     FROM SNMPv2-CONF
         DisplayString, TEXTUAL-CONVENTION
                     FROM SNMPv2-TC
         SnaControlPointName
                 -- Because the characters allowed in an SNA control
                 -- point name come from a restricted character set,
                 -- these names are not subject to internationalization.
                 FROM APPN-MIB
         snanauMIB
                 FROM SNA-NAU-MIB;

 ebnMIB   MODULE-IDENTITY
        LAST-UPDATED "9804281800Z" -- April 28, 1998
        ORGANIZATION  "IETF SNA NAU MIB WG / AIW APPN MIBs SIG"
        CONTACT-INFO
                "
                        Bob Clouston
                        Cisco Systems
                        7025 Kit Creek Road
                        P.O. Box 14987
                        Research Triangle Park, NC 27709, USA
                        Tel:    [phone]
                        E-mail: [e-mail]

                        Bob Moore
                        IBM Corporation
                        BRQA/501
                        P.O. Box 12195
                        Research Triangle Park, NC 27709, USA
                        Tel:    [phone]
                        E-mail: [e-mail]
                "

        DESCRIPTION
            " The MIB Module for Extended Border Node"

        ::= { snanauMIB 7 }

 -- snanauMIB ::= { mib-2 34 }

 -- ******************************************************************
 -- Textual Conventions
 -- ------------------------------------------------------------------
 SnaNAUWildcardName   ::= TEXTUAL-CONVENTION
      STATUS current
      DESCRIPTION
          "Fully-qualified network NAU name. Entries take one of three
          forms:
             - Explicit entries do not contain the character '*'.
             - Partial Wildcard entries have the form 'ccc*', where
               'ccc' represents one to sixteen characters in a legal
               SNA NAU Name.
             - A full wildcard  consists of a single character '*'.

          Because the characters allowed in an SNA NAU name come from
          a restricted character set, these names are not subject to
          internationalization."

 SYNTAX DisplayString(SIZE(1..17))

 -- ******************************************************************
 ebnObjects              OBJECT IDENTIFIER ::= { ebnMIB 1 }
 -- ******************************************************************

 -- ******************************************************************
 -- EBN Directory Group
 -- The ebnDirTable is an extension to the appnDirTable.  It specifies
 -- the subnet affiliation for LUs in the EBN's directory.
 -- ******************************************************************

 ebnDir                  OBJECT IDENTIFIER ::= { ebnObjects 1 }

 ebnDirTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnDirEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The EBN Directory Table.  This table is an extension
          to the APPN MIB's appnDirTable.  Entries in this table
          are in one-to-one correspondence with entries in the
          appnDirTable, with corresponding entries having identical
          values for their respective indexes."

      ::= { ebnDir 1 }

 ebnDirEntry OBJECT-TYPE
      SYNTAX EbnDirEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Entry in the EBN Directory Table."

      INDEX { ebnDirLuName }

      ::= { ebnDirTable 1 }

 EbnDirEntry ::= SEQUENCE {
         ebnDirLuName             SnaNAUWildcardName,
         ebnDirSubnetAffiliation  INTEGER     }

 ebnDirLuName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network LU name in the domain of a serving
          network node.  If this object has the same value as the
          appnDirLuName object in the APPN MIB, then the two objects
          are referring to the same LU."

      ::= { ebnDirEntry 1 }

 ebnDirSubnetAffiliation OBJECT-TYPE
      SYNTAX INTEGER { native (1),
                       nonNative (2),
                       subarea (3) }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "Specifies the subnetwork affiliation of the LU:
              - native(1)    : The LU is in the native APPN subnetwork.
              - nonNative(2) : The LU is in a non-native APPN subnetwork.
              - subarea(3)   : The LU is in a subarea network."

      ::= { ebnDirEntry 2 }

 -- ******************************************************************
 -- EBN Intermediate Session RSCV Group
 -- This table is a sparse extension to the appnIsInTable.  For
 -- sessions crossing ISTGs adjacent to the EBN, it contains the RSCV
 -- and COS used in the direction of the BIND destination.
 -- ******************************************************************

 ebnIsRscv               OBJECT IDENTIFIER ::= { ebnObjects 2 }

 ebnIsRscvTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnIsRscvEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The EBN Intermediate Session RSCV table.  This table is an
          extension to the appnIsInTable.  It contains the RSCV and COS
          used in the direction of the BIND destination.  There is an
          entry in this table for each session that traverses an ISTG
          when it enters or leaves this EBN, with corresponding entries
          having identical values for their respective indexes."

      ::= { ebnIsRscv 1}

 ebnIsRscvEntry OBJECT-TYPE
      SYNTAX EbnIsRscvEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Entry in ebnIsRscvTable."
      INDEX { ebnIsRscvCpName,
              ebnIsRscvPcid }

      ::= { ebnIsRscvTable 1 }

 EbnIsRscvEntry ::= SEQUENCE {
         ebnIsRscvCpName            SnaControlPointName,
         ebnIsRscvPcid              OCTET STRING,
         ebnIsRscvDestinationRoute  OCTET STRING,
         ebnIsRscvDestinationCos    DisplayString }

 ebnIsRscvCpName OBJECT-TYPE
      SYNTAX SnaControlPointName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The network-qualified control point name of the node at
          which the session and PCID originated.  For APPN and LEN
          nodes, this is either CP name of the APPN node at which
          the origin LU is located or the CP name of the NN serving
          the LEN node at which the origin LU is located.  For DLUR
          resources it is the name of the owning SSCP.

          If this object has the same value as the appnIsInFqCpName
          object in the APPN MIB, then the two objects are referring to
          the same APPN control point."

      ::= { ebnIsRscvEntry 1 }

 ebnIsRscvPcid OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE (8))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The procedure correlation identifier (PCID) of a session.
          It is an 8-octet value.

          If this object has the same value as the appnIsInPcid object
          in the APPN MIB, and if the corresponding ebnIsRscvCpName
          object has the same value as the corresponding
          appnIsInFqCpName object, then the entries indexed by these
          objects are referring to the same session."

      ::= { ebnIsRscvEntry 2 }

 ebnIsRscvDestinationRoute OBJECT-TYPE
      SYNTAX OCTET STRING(SIZE (0..255))
      MAX-ACCESS read-only

      STATUS current
      DESCRIPTION
          "The route selection control vector (RSCV x'2B') used in the
          direction towards the SLU."

      ::= { ebnIsRscvEntry 3 }

 ebnIsRscvDestinationCos OBJECT-TYPE
      SYNTAX DisplayString (SIZE (1..8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The Class of Service (COS) name used in the direction
          towards the SLU.

          Because the characters allowed in an SNA COS name come from
          a restricted character set, these names are not subject to
          internationalization."

      ::= { ebnIsRscvEntry 4 }

 -- ******************************************************************
 -- EBN Directory Config Group
 -- The following simple objects provide information about EBN
 -- directory.
 -- ******************************************************************

 ebnDirConfig            OBJECT IDENTIFIER ::= { ebnObjects 3 }

 ebnSearchCacheTime    OBJECT-TYPE
      SYNTAX Unsigned32
      UNITS "minutes"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The amount of time in minutes an extended border node will
          retain information about a multi-subnetwork search, once
          that that search terminates.  A value 0 indicates that the
          EBN has no defined limit, and the number of entries is
          bounded only by memory."

      ::= { ebnDirConfig 1 }

 ebnMaxSearchCache OBJECT-TYPE
      SYNTAX Unsigned32
      UNITS "entries"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The maximum number of multi-subnet entries to be cached.
          The value 0 indicates that the local node has no defined
          limit, and the number of entries is bounded only by
          memory."

      ::= { ebnDirConfig 2 }

 ebnDefaultSubnetVisitCount  OBJECT-TYPE
      SYNTAX Unsigned32
      UNITS "topology subnetworks"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "The default maximum number of subnetworks a LOCATE search
          procedure may traverse."

      ::= { ebnDirConfig 3 }

 -- ******************************************************************
 -- EBN COS Mapping Group
 -- The ebnCosMap Table specifies how non-native COS values are mapped
 -- to COS values defined in the native subnetwork.  The COS mappings
 -- that an EBN performs are determined by multiple factors, one of
 -- which is a set of user-defined mappings.  This table returns the
 -- COS mappings that the EBN is actually performing, rather than
 -- the user-defined mappings.
 -- ******************************************************************
 ebnCOS                  OBJECT IDENTIFIER ::= { ebnObjects 4 }

 ebnCosMapTable OBJECT-TYPE
      SYNTAX SEQUENCE OF EbnCosMapEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "The EBN COS Mapping Table.  This table specifies how non-
          native COS values are mapped to COS values defined in the
          native subnetwork.

          Note:  The COS mappings that an EBN performs are determined
          by multiple factors, one of which is a set of user-defined
          initial mappings.  This table returns the COS mappings that
          the EBN is actually performing at the time it is queried,
          rather than the user-defined initial ones."

      ::= { ebnCOS 1 }

 ebnCosMapEntry OBJECT-TYPE
      SYNTAX EbnCosMapEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "An entry in the EBN COS Mapping table."

      INDEX { ebnCosMapCpName,
              ebnCosMapNonNativeCos }

      ::= { ebnCosMapTable 1 }

 EbnCosMapEntry ::= SEQUENCE {
         ebnCosMapCpName              SnaNAUWildcardName,
         ebnCosMapNonNativeCos        DisplayString,
         ebnCosMapNativeCos           DisplayString }

 ebnCosMapCpName OBJECT-TYPE
      SYNTAX SnaNAUWildcardName
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "Fully qualified network CP name for which the COS mapping
          applies."

      ::= { ebnCosMapEntry 1 }

 ebnCosMapNonNativeCos OBJECT-TYPE
      SYNTAX DisplayString (SIZE(1..8))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
          "This object contains one of the following values:

             - An 8-character COS name used in a non-native subnetwork.
             - The single character '*', identifying the entry with the
               default native COS for a non-native CP name.  This entry
               is used when there is no entry in the table for a
               non-native CP name / non-native COS pair.

          Because the characters allowed in an SNA COS name come from
          a restricted character set, these names are not subject to
          internationalization."

      ::= { ebnCosMapEntry 2 }

 ebnCosMapNativeCos OBJECT-TYPE
      SYNTAX DisplayString (SIZE(1..8))
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
          "An 8-byte name for the class-of-service, as known in the
          native subnetwork.

          Because the characters allowed in an SNA COS name come from
          a restricted character set, these names are not subject to
          internationalization."

      ::= { ebnCosMapEntry 3 }

 -- ******************************************************************
 -- EBN Subnet Routing List Group
 -- The EBN Subnet Routing List indicates to which nodes an EBN
 -- forwards search request.  This group contains information
 -- pertaining to the CONFIGURED Subnet Routing List at an EBN.  How a
 -- particular search request is routed is determined by a transient
 -- list that the EBN creates based on the configured list and other
 -- factors.
 -- *******************************************************************

 ebnSubnetRoutingList    OBJECT IDENTIFIER ::= { ebnObjects 5 }