rfc1382-mib

很不错java的SNMP应用例子

RFC1382-MIB DEFINITIONS ::= BEGIN

IMPORTS
        Counter, Gauge, TimeTicks
                FROM RFC1155-SMI
        OBJECT-TYPE
                FROM RFC-1212
        DisplayString, transmission
                FROM RFC1213-MIB
        TRAP-TYPE
                FROM RFC-1215
        EntryStatus
                FROM RFC1271-MIB
        PositiveInteger,
        IfIndexType
                FROM RFC1381-MIB;

x25     OBJECT IDENTIFIER ::= { transmission 5 }


-- Support of the X25 subtree and all subtrees under it
-- is mandatory for all agents of system that implement X.25.

X121Address ::= OCTET STRING (SIZE(0..17))
 -- 0 to 17 bytes in length containing the ASCII
 -- characters [0-9], each octet contains one digit
 -- of the address.


-- ###########################################################
--            X.25 Administration Table
-- ###########################################################

x25AdmnTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF X25AdmnEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the administratively
                set configuration parameters for an X.25
                Packet Level Entity (PLE).

               Most of the objects in this table have
                corresponding objects in the x25OperTable.
                This table contains the values as last set
                by the administrator.  The x25OperTable
                contains the values actually in use by an
                X.25 PLE.

                Changing an administrative value may or may
                not change a current operating value.  The
                operating value may not change until the
                interface is restarted.  Some
                implementations may change the values
                immediately upon changing the administrative
                table.  All implementations are required to
                load the values from the administrative
                table when initializing a PLE."
        ::= { x25 1 }

x25AdmnEntry OBJECT-TYPE
        SYNTAX  X25AdmnEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Entries of x25AdmnTable."
        INDEX { x25AdmnIndex }
        ::= { x25AdmnTable 1 }

X25AdmnEntry ::= SEQUENCE {
        x25AdmnIndex
                IfIndexType,
        x25AdmnInterfaceMode
                INTEGER,
        x25AdmnMaxActiveCircuits
                INTEGER,
        x25AdmnPacketSequencing
                INTEGER,
        x25AdmnRestartTimer
                PositiveInteger,
     x25AdmnCallTimer
                PositiveInteger,
        x25AdmnResetTimer
                PositiveInteger,
        x25AdmnClearTimer
                PositiveInteger,
        x25AdmnWindowTimer
                PositiveInteger,
        x25AdmnDataRxmtTimer
                PositiveInteger,
        x25AdmnInterruptTimer
                PositiveInteger,
        x25AdmnRejectTimer
                PositiveInteger,
        x25AdmnRegistrationRequestTimer
                PositiveInteger,
        x25AdmnMinimumRecallTimer
                PositiveInteger,
        x25AdmnRestartCount
                INTEGER,
        x25AdmnResetCount
                INTEGER,
        x25AdmnClearCount
                INTEGER,
        x25AdmnDataRxmtCount
                INTEGER,
        x25AdmnRejectCount
                INTEGER,
        x25AdmnRegistrationRequestCount
                INTEGER,
        x25AdmnNumberPVCs
                INTEGER,
        x25AdmnDefCallParamId
                OBJECT IDENTIFIER,
        x25AdmnLocalAddress
                X121Address,
        x25AdmnProtocolVersionSupported
                OBJECT IDENTIFIER
        }

x25AdmnIndex OBJECT-TYPE
        SYNTAX  IfIndexType
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
        "The ifIndex value for the X.25 Interface."
        ::= { x25AdmnEntry 1 }

x25AdmnInterfaceMode OBJECT-TYPE
        SYNTAX  INTEGER {
                        dte (1),
                        dce (2),
                        dxe (3)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Identifies DCE/DTE mode in which the
                interface operates.  A value of dxe
                indicates the mode will be determined by XID
                negotiation."
        REFERENCE "10733 5.9 interfaceMode"
        ::= { x25AdmnEntry 2 }

x25AdmnMaxActiveCircuits        OBJECT-TYPE
        SYNTAX  INTEGER (0..4096)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The maximum number of circuits this PLE can
                support; including PVCs."
        REFERENCE "10733 5.9 maxActiveCircuits;
                See ISO 8208, Section 3.7"
        ::= { x25AdmnEntry 3 }

x25AdmnPacketSequencing OBJECT-TYPE
        SYNTAX  INTEGER {
                        modulo8 (1),
                        modulo128 (2)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The modulus of the packet sequence number
                space."
        REFERENCE "10733 extendedPacketSequencing;
                See ISO 8208 Section 7.1.1"
        ::= { x25AdmnEntry 4 }

x25AdmnRestartTimer OBJECT-TYPE
     SYNTAX     PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T20 restart timer in milliseconds."
        REFERENCE "10733 5.9 restartTime
                See ISO 8208 Section 4.1, table 26"
        ::= { x25AdmnEntry 5 }

x25AdmnCallTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T21 Call timer in milliseconds."
        REFERENCE "10733 callTime;
                See ISO 8208 Section 5.2.1, table 26"
        ::= { x25AdmnEntry 6 }

x25AdmnResetTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T22 Reset timer in milliseconds."
        REFERENCE "10733 resetTime;
                See ISO 8208 Section 8.1, table 26"
        ::= { x25AdmnEntry 7 }

x25AdmnClearTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T23 Clear timer in milliseconds."
        REFERENCE "10733 clearTime;
                See ISO 8208 Section 5.5.1, table 26"
        ::= { x25AdmnEntry 8 }

x25AdmnWindowTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T24 window status transmission timer in
                milliseconds.  A value of 2147483647
                indicates no window timer in use."
        REFERENCE "10733 5.10.1 windowTime (opt);
                See ISO 8208 Section 11.2.2, table 26"
        ::= { x25AdmnEntry 9 }

x25AdmnDataRxmtTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T25 data retransmission timer in
                milliseconds.  A value of 2147483647
                indicates no data retransmission timer in
                use."
        REFERENCE "10733 5.10.1 dataRetransmissionTime (opt);
                See ISO 8208 Section 11.2.1, table 26"
        ::= { x25AdmnEntry 10 }

x25AdmnInterruptTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T26 interrupt timer in milliseconds.  A
                value of 2147483647 indicates no interrupt
                timer in use."
        REFERENCE "10733 interruptTime;
                See ISO 8208 Section 6.8.1, table 26"
        ::= { x25AdmnEntry 11 }

x25AdmnRejectTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T27 Reject retransmission timer in
                milliseconds.  A value of 2147483647
                indicates no reject timer in use."
        REFERENCE "10733 5.10.1 dataRejectTime (opt);
                See ISO 8208 Section 13.4.1, table 26"
        ::= { x25AdmnEntry 12 }

x25AdmnRegistrationRequestTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The T28 registration timer in milliseconds.
                A value of 2147483647 indicates no
                registration timer in use."
        REFERENCE "10733 5.8.1 registrationRequestTime (opt)
                See ISO 8208    Section 13.1.1.1, table 26"
        ::= { x25AdmnEntry 13 }

x25AdmnMinimumRecallTimer OBJECT-TYPE
        SYNTAX  PositiveInteger
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Minimum time interval between unsuccessful
                call attempts in milliseconds."
        REFERENCE "10733 5.9 minimum RecallTimer"
        ::= { x25AdmnEntry 14 }

x25AdmnRestartCount OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The R20 restart retransmission count."
        REFERENCE "10733 5.9 restartCount;
                See ISO 8208    Section 4.1, table 27"
        ::= { x25AdmnEntry 15 }

x25AdmnResetCount OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The r22 Reset retransmission count."
        REFERENCE "10733 resetCount;
                See section ISO 8208 8.1, table 27"
        ::= { x25AdmnEntry 16 }

x25AdmnClearCount OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
        "The r23 Clear retransmission count."
        REFERENCE "10733 clearCount;
                See ISO 8208 Section 5.5.1, table 27"
        ::= { x25AdmnEntry 17 }

x25AdmnDataRxmtCount OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The R25 Data retransmission count.  This
                value is irrelevant if the
                x25AdmnDataRxmtTimer indicates no timer in
                use."
        REFERENCE "10733 5.10.1 dataRetransmissionCount (opt)
                See ISO 8208 Section 11.2.1, table 27"
        ::= { x25AdmnEntry 18 }

x25AdmnRejectCount OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The R27 reject retransmission count.  This
                value is irrelevant if the
                x25AdmnRejectTimer indicates no timer in
                use."
        REFERENCE "10733 5.10.1 dataRejectCount (opt)"
        ::= { x25AdmnEntry 19 }

x25AdmnRegistrationRequestCount OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The R28 Registration retransmission Count.
                This value is irrelevant if the
                x25AdmnRegistrationRequestTimer indicates no
                timer in use."
        REFERENCE "10733 5.8.1 registrationRequestCount (opt);
                See ISO 8208    Section 13.1.1.1, table 27"
        ::= { x25AdmnEntry 20 }

x25AdmnNumberPVCs OBJECT-TYPE
        SYNTAX  INTEGER (0..4096)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The number of PVC configured for this PLE.
                The PVCs use channel numbers from 1 to this
                number."
        ::= { x25AdmnEntry 21 }

x25AdmnDefCallParamId OBJECT-TYPE
        SYNTAX  OBJECT IDENTIFIER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This identifies the instance of the
                x25CallParmIndex for the entry in the
                x25CallParmTable which contains the default
                call parameters for this PLE."
        ::= { x25AdmnEntry 22 }

x25AdmnLocalAddress OBJECT-TYPE
        SYNTAX  X121Address
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The local address for this PLE subnetwork.
                A zero length address maybe returned by PLEs
                that only support PVCs."
        REFERENCE "10733 5.9 localDTEAddress"
        ::= { x25AdmnEntry 23 }

x25AdmnProtocolVersionSupported OBJECT-TYPE
        SYNTAX  OBJECT IDENTIFIER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Identifies the version of the X.25 protocol
                this interface should support.  Object
                identifiers for common versions are defined
                below in the x25ProtocolVersion subtree."
        REFERENCE "10733 5.9 protocolVersionSupported"
        ::= { x25AdmnEntry 24 }