atm2-mib

很不错java的SNMP应用例子

    DESCRIPTION
       "This table contains ATM local interface configuration
       parameters, one entry per ATM signalling interface."
    ::= { atm2MIBObjects 4 }

atmSigSupportEntry         OBJECT-TYPE
    SYNTAX       AtmSigSupportEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
       "This list contains signalling configuration parameters
       and state variables."
    INDEX { ifIndex }
    ::= { atmSigSupportTable  1}

AtmSigSupportEntry    ::= SEQUENCE  {
    atmSigSupportClgPtyNumDel       INTEGER,
    atmSigSupportClgPtySubAddr      INTEGER,
    atmSigSupportCldPtySubAddr      INTEGER,
    atmSigSupportHiLyrInfo          INTEGER,
    atmSigSupportLoLyrInfo          INTEGER,
    atmSigSupportBlliRepeatInd      INTEGER,
    atmSigSupportAALInfo            INTEGER,
    atmSigSupportPrefCarrier        OCTET STRING
}

atmSigSupportClgPtyNumDel     OBJECT-TYPE
    SYNTAX       INTEGER  { enabled(1), disabled(2) }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
       "This object indicates whether the Calling Party Number
       Information Element is transferred to the called party
       address.  The value of this object can be:

         - enabled(1)  This Information Element is transferred
                       to the called party

         - disabled(2) This Information Element is NOT
                       transferred to the called party."

    ::= { atmSigSupportEntry 1 }

atmSigSupportClgPtySubAddr   OBJECT-TYPE



    SYNTAX       INTEGER  { enabled(1), disabled(2) }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
       "This object indicates whether to accept and transfer the Calling
       Party Subaddress Information Element from the calling party to
       the called party.  Calling party subaddress information shall
       only be transferred to the called party if calling party number
       delivery is enabled (i.e., atmSigSupportClgPtyNumDel =
       'enabled(1)'.  The value of this object can be:

         - enabled(1)  This Information Element is transferred
                       to the called party

         - disabled(2) This Information Element is NOT
                       transferred to the called party."

    ::= { atmSigSupportEntry 2 }

atmSigSupportCldPtySubAddr    OBJECT-TYPE
    SYNTAX       INTEGER  { enabled(1), disabled(2) }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
       "This object indicates whether to accept, transfer, and deliver
       the Called Party Subaddress Information Element from the calling
       party to the called party.  The value of this object can be:

         - enabled(1)  This Information Element is transferred
                       to the called party

         - disabled(2) This Information Element is NOT
                       transferred to the called party."

    ::= { atmSigSupportEntry 3 }

atmSigSupportHiLyrInfo     OBJECT-TYPE
    SYNTAX       INTEGER  { enabled(1), disabled(2) }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
       "This object indicates whether to accept, transfer, and deliver
       the Broadband High Layer Information Element from the calling
       party to the called party.  The value of this object can be:

         - enabled(1)  This Information Element is transferred
                       to the called party




         - disabled(2) This Information Element is NOT
                       transferred to the called party."

    ::= { atmSigSupportEntry 4 }

atmSigSupportLoLyrInfo     OBJECT-TYPE
    SYNTAX       INTEGER  { enabled(1), disabled(2) }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
       "This object indicates whether to accept, transfer, and deliver
       the Broadband Low Layer Information Element from the calling
       party to the called party.  The value of this object can be:

         - enabled(1)  This Information Element is transferred
                       to the called party

         - disabled(2) This Information Element is NOT
                       transferred to the called party."

    ::= { atmSigSupportEntry 5 }

atmSigSupportBlliRepeatInd      OBJECT-TYPE
    SYNTAX       INTEGER  { enabled(1), disabled(2) }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This object indicates whether to accept, transfer, and deliver
        the Broadband Repeat Indicator with two or three instances of
        the Broadband Low Layer Information Element for low layer
        information selection from the calling party to the called
        party.  This object's value should always be disabled(2) if
        the value of atmSigSupportLolyrInfo is disabled(2).

        The value of this object can be:

        - enabled(1)  This Information Element is transferred
              to the called party

        - disabled(2) This Information Element is NOT
              transferred to the called party."
    ::= { atmSigSupportEntry 6 }

atmSigSupportAALInfo     OBJECT-TYPE
    SYNTAX       INTEGER  { enabled(1), disabled(2) }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION



       "This object indicates whether to accept, transfer, and deliver
       the ATM Adaptation Layer Parameters Information Element from the
       calling party to the called party.  The value of this object can
       be:

         - enabled(1)  This Information Element is transferred
                       to the called party

         - disabled(2) This Information Element is NOT
                       transferred to the called party."

    ::= { atmSigSupportEntry 7 }

atmSigSupportPrefCarrier     OBJECT-TYPE
    SYNTAX       OCTET STRING (SIZE(0|4))
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
       "This parameter identifies the carrier to which intercarrier
       calls originated from this interface are routed when transit
       network selection information is not provided by the calling
       party.  If a Carrier Identification Code (CIC) is used the
       parameter shall contain the CIC.  For three-digit CICs, the first
       octet shall be '0' and the CIC is contained in the three
       following octets.  If the preferred carrier feature is not
       supported the value is a zero-length string."

    ::= { atmSigSupportEntry 8 }

  -- 5. ATM Signalling Descriptor Parameter Table

    atmSigDescrParamTable     OBJECT-TYPE
        SYNTAX       SEQUENCE OF AtmSigDescrParamEntry
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
            "A table contains signalling capabilities of VCLs except the
            Traffic Descriptor.  Traffic descriptors are described in
            the atmTrafficDescrParamTable."

        REFERENCE
            "ATM User-Network Interface Specification, Version 3.1 (UNI
            3.1), September 1994, Section 5.4.5 Variable Length
            Information Elements."

        ::= { atm2MIBObjects 5 }

    atmSigDescrParamEntry        OBJECT-TYPE



        SYNTAX       AtmSigDescrParamEntry
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
            "Each entry in this table represents a
            set of signalling capabilities that can
            be applied to a VCL.  There is no requirement
            for unique entries, except that the index must
            be unique."
        INDEX { atmSigDescrParamIndex }
        ::= { atmSigDescrParamTable 1 }

    AtmSigDescrParamEntry ::=
        SEQUENCE {
            atmSigDescrParamIndex
                                   AtmSigDescrParamIndex,
            atmSigDescrParamAalType         INTEGER,
            atmSigDescrParamAalSscsType     INTEGER,
            atmSigDescrParamBhliType        INTEGER,


            atmSigDescrParamBhliInfo        OCTET STRING,
            atmSigDescrParamBbcConnConf     INTEGER,
            atmSigDescrParamBlliLayer2      INTEGER,
            atmSigDescrParamBlliLayer3      INTEGER,
            atmSigDescrParamBlliPktSize     INTEGER,
            atmSigDescrParamBlliSnapId      INTEGER,
            atmSigDescrParamBlliOuiPid      OCTET STRING,
            atmSigDescrParamRowStatus       RowStatus
        }

    atmSigDescrParamIndex OBJECT-TYPE
        SYNTAX       AtmSigDescrParamIndex
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
            "The value of this object is used by the
            atmVclGenSigDescrIndex object in the atmVclGenTable to
            identify a row in this table."

        ::= { atmSigDescrParamEntry 1 }

     atmSigDescrParamAalType OBJECT-TYPE
         SYNTAX       INTEGER {
            other(1),       -- not defined
            aal1(2),        -- AAL type 1
            aal34(3),       -- AAL type 3/4
            aal5(4),        -- AAL type 5



            userDefined(5), -- User-Defined AAL
            aal2(6)         -- AAL type 2
            }
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
            "The AAL type.  The value of this object is set to other(1)
            when not defined."

         DEFVAL { other }
         ::= { atmSigDescrParamEntry 2 }

     atmSigDescrParamAalSscsType OBJECT-TYPE
         SYNTAX       INTEGER {
            other(1),       -- other, or not used
            assured(2),     -- Data SSCS based on SSCOP
                            -- assured operation
            nonassured(3),  -- Data SSCS based on SSCOP
                            -- non-assured operation
            frameRelay(4),  -- frame relay SSCS
            null(5)         -- null

            }
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
            "The SSCS type used by this entry."

         DEFVAL { other }
         ::= { atmSigDescrParamEntry 3 }

     atmSigDescrParamBhliType OBJECT-TYPE
         SYNTAX       INTEGER {
            other(1),         -- not defined
            iso(2),           -- ISO
            user(3),          -- User specific
            hiProfile(4),     -- Higher layer profile
                              -- this enum applicable to
                              -- UNI 3.0 only
            vendorSpecific(5) -- Vender specific
                              -- application identifier
            }
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
            "The Broadband high layer type."

         DEFVAL { other }



         ::= { atmSigDescrParamEntry 4 }

     atmSigDescrParamBhliInfo OBJECT-TYPE
         SYNTAX     OCTET STRING (SIZE(0..8))
         MAX-ACCESS read-create
         STATUS     current
         DESCRIPTION
            "The Broadband high layer information.  When
            atmSigDescrParamBhliType is set to iso(2), the value of this
            object is a zero length string.  When
            atmSigDescrParamBhliType is set to user(3), the value of
            this object is an octet string with length ranging from 0 to
            8.  When atmSigDescrParamBhliType is set to hiProfile(4),
            the value of this object is a length of 4 octet string
            containing user to user profile identifier.  When
            atmSigDescrParamBhliType is set to vendorSpecific(5), the
            value of this object is a length of 7 octet string, where
            the most significant 3 octets consist of a globally-
            administered OUI, and the least significant 4 octets are the
            vender administered application OUI."

         DEFVAL { ''H }

         ::= { atmSigDescrParamEntry 5 }

     atmSigDescrParamBbcConnConf OBJECT-TYPE
         SYNTAX       INTEGER {
             ptp(1),   -- point-to-point
             ptmp(2)   -- point-to-multipoint
             }
         MAX-ACCESS   read-create
         STATUS       current
         DESCRIPTION
             "The Broadband bearer capability user plane connection
              configuration parameter."
         DEFVAL { ptp }
         ::= { atmSigDescrParamEntry 6 }

      atmSigDescrParamBlliLayer2 OBJECT-TYPE
          SYNTAX       INTEGER {
             other(1),        -- not specified
             iso1745(2),      -- Basic mode ISO 1745
             q921(3),         -- CCITT Recommendation Q.921
             x25linklayer(4), -- CCITT Recommendation X.25
                              -- Link Layer
             x25multilink(5), -- CCITT Recommendation X.25
                              -- Multilink
             lapb(6),         -- Extended LAPB; for half



                              -- duplex operation
             hdlcArm(7),      -- HDLC ARM (ISO 4335)
             hdlcNrm(8),      -- HDLC NRM (ISO 4335)
             hdlcAbm(9),      -- HDLC ABM (ISO 4335)
             iso88022(10),    -- LAN logical link control
                              -- (ISO 8802/2)
             x75slp(11),      -- CCITT Recommendation X.75,
                              -- single link
                              -- procedure (SLP)
             q922(12),        -- CCITT Recommendation Q.922
             userDef(13),     -- User specified
             iso7776(14)      -- ISO 7776 DTE-DTE operation