l2tp-mib

很不错java的SNMP应用例子

            used during the tunnel authentication phase of
            tunnel establishment. This object MUST be accessible
            only via requests using both authentication and
            privacy. The agent MUST report an empty string in
            response to get, get-next and get-bulk requests."
        ::= { l2tpDomainConfigEntry 5 }

l2tpDomainConfigTunnelSecurity OBJECT-TYPE
        SYNTAX          INTEGER {
                            none(1),
                            other(2),
                            ipSec(3)
                        }
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object defines whether this tunnel domain
            requires that all tunnels are to be secured. The



            value of ipsec(3) indicates that all tunnel packets,
            control and session, have IP Security headers. The
            type of IP Security headers (AH, ESP etc) and how
            they are further described is outside the scope of
            this document."
        DEFVAL { none }
        ::= { l2tpDomainConfigEntry 6 }

l2tpDomainConfigTunnelHelloInt OBJECT-TYPE
        SYNTAX          Integer32 (0..3600)
        UNITS           "seconds"
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object defines the interval in which Hello
            (or keep-alive) packets are to be sent by local
            peers belonging to this tunnel domain. The value
            zero effectively disables the sending of Hello
            packets. This object may be modified when the
            administrative state is enabled for this conceptual
            row."
        DEFVAL { 60 }
        ::= { l2tpDomainConfigEntry 7 }

l2tpDomainConfigTunnelIdleTO OBJECT-TYPE
        SYNTAX          Integer32 (-1..86400)
        UNITS           "seconds"
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object defines the period of time that an
            established tunnel belonging to this tunnel
            domain with no active sessions will wait before
            disconnecting the tunnel. A value of zero indicates
            that the tunnel will disconnect immediately after the
            last session disconnects. A value of -1 leaves the
            tunnel up indefinitely. This object may be modified
            when the administrative state is enabled for this
            conceptual row."
        DEFVAL { 0 }
        ::= { l2tpDomainConfigEntry 8 }

l2tpDomainConfigControlRWS OBJECT-TYPE
        SYNTAX          Integer32 (1..65535)
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object defines the control channel receive



            window size for tunnels belonging to this domain. It
            specifies the maximum number of packets the tunnel
            peer belonging to this domain can send without waiting
            for an acknowledgement from this peer."
        DEFVAL { 4 }
        ::= { l2tpDomainConfigEntry 9 }

l2tpDomainConfigControlMaxRetx OBJECT-TYPE
        SYNTAX          Integer32 (0..32)
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object defines the maximum number of retransmissions
            which the L2TP stack will attempt for tunnels belonging
            to this domain before assuming that the peer is no
            longer responding."
        DEFVAL { 5 }
        ::= { l2tpDomainConfigEntry 10 }

l2tpDomainConfigControlMaxRetxTO OBJECT-TYPE
        SYNTAX          Integer32 (1..32)
        UNITS           "seconds"
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object defines the maximum retransmission timeout
            interval which the L2TP stack will wait for tunnels
            belonging to this domain before retransmitting a
            control packet that has not been acknowledged."
        DEFVAL { 16 }
        ::= { l2tpDomainConfigEntry 11 }

l2tpDomainConfigPayloadSeq OBJECT-TYPE
        SYNTAX          INTEGER {
                            onDemand(1),
                            never(2),
                            always(3)
                        }
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object determines whether or not session payload
            packets will be requested to be sent with sequence
            numbers from tunnel peers belonging to this domain.
            The value onDemand(1) allows the L2TP implementation
            to initiate payload sequencing when necessary based
            on local information (e.g: during LCP/NCP negotiations
            or for CCP). The value never(2) indicates that L2TP



            will never initiate sequencing but will do sequencing
            if asked. The value always(3) indicates that L2TP
            will send the Sequencing Required AVP during session
            establishment."
        DEFVAL { onDemand }
        ::= { l2tpDomainConfigEntry 12 }

l2tpDomainConfigReassemblyTO OBJECT-TYPE
        SYNTAX          L2tpMilliSeconds
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object defines the number of milliseconds that
            local peers of this tunnel domain will wait before
            processing payload packets that were received out of
            sequence (which are waiting for the packet(s) to put
            them in sequence).  A low value increases the chance
            of delayed packets to be discarded (which MAY cause
            the PPP decompression engine to reset) while a high
            value may cause more queuing and possibly degrade
            throughput if packets are truly lost. The default
            value for this object is zero which will result in
            all delayed packets being lost."
        DEFVAL { 0 }
        ::= { l2tpDomainConfigEntry 13 }

l2tpDomainConfigProxyPPPAuth OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "This object is used to configure the sending
            or acceptance of the PPP Proxy Authentication
            AVP's on the LAC or LNS."
        DEFVAL { true }
        ::= { l2tpDomainConfigEntry 14 }

l2tpDomainConfigStorageType  OBJECT-TYPE
        SYNTAX          StorageType
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "The storage type for this conceptual row.

            Conceptual rows having the value 'permanent' must
            allow write-access at a minimum to:

            - l2tpDomainConfigAdminState and



              l2tpDomainConfigDrainTunnels at all times
            - l2tpDomainConfigSecret if l2tpDomainConfigAuth
              has been configured as 'challenge'

            It is an implementation issue to decide if a SET for
            a readOnly or permanent row is accepted at all. In some
            contexts this may make sense, in others it may not. If
            a SET for a readOnly or permanent row is not accepted
            at all, then a 'wrongValue' error must be returned."
        ::= { l2tpDomainConfigEntry 15 }

l2tpDomainConfigStatus  OBJECT-TYPE
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
           "The status of this Domain entry. Columnar objects
            corresponding to this conceptual row may be modified
            according to their description clauses when this
            RowStatus object is 'active'."
        ::= { l2tpDomainConfigEntry 16 }

--
--      The L2TP Domain Status and Statistics Table
--

l2tpDomainStatsTable    OBJECT-TYPE
        SYNTAX          SEQUENCE OF L2tpDomainStatsEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "The L2TP Domain Status and Statistics table. This
            table contains objects that can be used to describe
            the current status and statistics of a tunnel domain.
            There is a 1-1 correspondence between conceptual
            rows of this table and conceptual rows of the
            l2tpDomainConfigTable."
        ::= { l2tpObjects 3 }

l2tpDomainStatsEntry    OBJECT-TYPE
        SYNTAX          L2tpDomainStatsEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
           "An L2TP Domain Stats entry. An entry in this table
            may correspond to a single endpoint or a group of
            tunnel endpoints."
        AUGMENTS { l2tpDomainConfigEntry }



        ::= { l2tpDomainStatsTable 1 }

L2tpDomainStatsEntry ::=
        SEQUENCE {
            l2tpDomainStatsTotalTunnels
                Counter32,
            l2tpDomainStatsFailedTunnels
                Counter32,
            l2tpDomainStatsFailedAuths
                Counter32,
            l2tpDomainStatsActiveTunnels
                Gauge32,
            l2tpDomainStatsTotalSessions
                Counter32,
            l2tpDomainStatsFailedSessions
                Counter32,
            l2tpDomainStatsActiveSessions
                Gauge32,
            l2tpDomainStatsDrainingTunnels
                TruthValue,
            l2tpDomainStatsControlRxOctets
                Counter32,
            l2tpDomainStatsControlRxPkts
                Counter32,
            l2tpDomainStatsControlTxOctets
                Counter32,
            l2tpDomainStatsControlTxPkts
                Counter32,
            l2tpDomainStatsPayloadRxOctets
                Counter32,
            l2tpDomainStatsPayloadRxPkts
                Counter32,
            l2tpDomainStatsPayloadRxDiscs
                Counter32,
            l2tpDomainStatsPayloadTxOctets
                Counter32,
            l2tpDomainStatsPayloadTxPkts
                Counter32,
            l2tpDomainStatsControlHCRxOctets
                Counter64,
            l2tpDomainStatsControlHCRxPkts
                Counter64,
            l2tpDomainStatsControlHCTxOctets
                Counter64,
            l2tpDomainStatsControlHCTxPkts
                Counter64,
            l2tpDomainStatsPayloadHCRxOctets
                Counter64,



            l2tpDomainStatsPayloadHCRxPkts
                Counter64,
            l2tpDomainStatsPayloadHCRxDiscs
                Counter64,
            l2tpDomainStatsPayloadHCTxOctets
                Counter64,
            l2tpDomainStatsPayloadHCTxPkts
                Counter64
        }

l2tpDomainStatsTotalTunnels OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object returns the total number of tunnels
            that have successfully reached the established
            state for this tunnel domain."
        ::= { l2tpDomainStatsEntry 1 }

l2tpDomainStatsFailedTunnels OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object returns the number of tunnels that
            failed (eg: connection timeout, unsupported
            or malformed AVP's etc) to reach the established
            state for this tunnel domain."
        ::= { l2tpDomainStatsEntry 2 }

l2tpDomainStatsFailedAuths OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object returns the number of failed tunnel
            connection attempts for this domain because the
            tunnel peer failed authentication."
        ::= { l2tpDomainStatsEntry 3 }

l2tpDomainStatsActiveTunnels OBJECT-TYPE
        SYNTAX          Gauge32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object returns the number of tunnels that
            are currently active for this domain."



        ::= { l2tpDomainStatsEntry 4 }

l2tpDomainStatsTotalSessions OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object returns the total number of sessions
            that have successfully reached the established
            state for this tunnel domain."
        ::= { l2tpDomainStatsEntry 5 }

l2tpDomainStatsFailedSessions OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object returns the number of sessions that
            failed (eg: connection timeout, unsupported
            or malformed AVP's etc) to reach the established
            state for this tunnel domain."
        ::= { l2tpDomainStatsEntry 6 }

l2tpDomainStatsActiveSessions OBJECT-TYPE
        SYNTAX          Gauge32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object returns the number of sessions that
            are currently active for this domain."
        ::= { l2tpDomainStatsEntry 7 }

l2tpDomainStatsDrainingTunnels OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "This object indicates if this domain is draining
            off sessions from all tunnels."
        ::= { l2tpDomainStatsEntry 8 }