snmp-repeater-mib

很不错java的SNMP应用例子

    DESCRIPTION
            "This object identifies the repeater to
            which this port belongs.  The repeater
            identified by a particular value of this object
            is the same as that identified by the same
            value of rptrInfoId.  A value of zero
            indicates that this port currently is not
            a member of any repeater."
    ::= { rptrPortEntry 6 }


-- New version of basic information at the repeater level.
--
-- Configuration, status, and control objects for
-- each managed repeater in the system.

rptrInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RptrInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table of information about each
            non-trivial repeater. The number of entries
            depends on the physical configuration of the
            managed system."
    ::= { rptrAllRptrInfo 1 }

rptrInfoEntry OBJECT-TYPE
    SYNTAX      RptrInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "An entry in the table, containing information
            about a single non-trivial repeater."
    INDEX    { rptrInfoId }
    ::= { rptrInfoTable 1 }

RptrInfoEntry ::=
    SEQUENCE {
        rptrInfoId
            Integer32,
        rptrInfoRptrType
            INTEGER,
        rptrInfoOperStatus
            INTEGER,
        rptrInfoReset
            INTEGER,
        rptrInfoPartitionedPorts
            Gauge32,
        rptrInfoLastChange
            TimeStamp
    }

rptrInfoId OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This object identifies the repeater for which
            this entry contains information."
    ::= { rptrInfoEntry 1 }

rptrInfoRptrType OBJECT-TYPE
    SYNTAX      INTEGER {
                  other(1),                -- undefined or unknown
                  tenMb(2),
                  onehundredMbClassI(3),
                  onehundredMbClassII(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The rptrInfoRptrType returns a value that identifies
            the CSMA/CD repeater type."
    REFERENCE
            "[IEEE 802.3 Mgt], 30.4.1.1.2, aRepeaterType."
    ::= { rptrInfoEntry 2 }

rptrInfoOperStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                  other(1),
                  ok(2),
                  failure(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The rptrInfoOperStatus object indicates the
            operational state of the repeater."
    REFERENCE
            "[IEEE 802.3 Mgt], 30.4.1.1.5, aRepeaterHealthState."
    ::= { rptrInfoEntry 3 }

rptrInfoReset OBJECT-TYPE
    SYNTAX      INTEGER {
                  noReset(1),
                  reset(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Setting this object to reset(2) causes a
            transition to the START state of Fig 9-2 in
            section 9 [IEEE 802.3 Std] for a 10Mb/s repeater,
            and to the START state of Fig 27-2 in section 27
            of that standard for a 100Mb/s repeater.

            Setting this object to noReset(1) has no effect.
            The agent will always return the value noReset(1)
            when this object is read.

            After receiving a request to set this variable to
            reset(2), the agent is allowed to delay the reset
            for a short period.  For example, the implementor
            may choose to delay the reset long enough to allow
            the SNMP response to be transmitted.  In any
            event, the SNMP response must be transmitted.

            This action does not reset the management counters
            defined in this document nor does it affect the
            portAdminStatus parameters.  Included in this
            action is the execution of a disruptive Self-Test
            with the following characteristics:  a) The nature
            of the tests is not specified.  b) The test resets
            the repeater but without affecting management
            information about the repeater.  c) The test does
            not inject packets onto any segment.  d) Packets
            received during the test may or may not be
            transferred.  e) The test does not interfere with
            management functions.

            After performing this self-test, the agent will
            update the repeater health information (including
            rptrInfoOperStatus), and send a rptrInfoResetEvent
            notification."
    REFERENCE
            "[IEEE 802.3 Mgt], 30.4.1.2.1, acResetRepeater."
    ::= { rptrInfoEntry 4 }

rptrInfoPartitionedPorts OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This object returns the total number of ports in
            the repeater whose current state meets all three
            of the following criteria:  rptrPortOperStatus
            does not have the value notPresent(3),
            rptrPortAdminStatus is enabled(1), and
            rptrPortAutoPartitionState is autoPartitioned(2)."
    ::= { rptrInfoEntry 5 }

rptrInfoLastChange OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The value of sysUpTime when any of the following
            conditions occurred:
              1) agent cold- or warm-started;
              2) this instance of repeater was created
                 (such as when a device or module was
                 added to the system);
              3) a change in the value of rptrInfoOperStatus;
              4) ports were added or removed as members of
                 the repeater; or
              5) any of the counters associated with this
                 repeater had a discontinuity."
    ::= { rptrInfoEntry 6 }




--
-- Old version of statistics at the repeater level.
--
-- Performance monitoring statistics for the repeater
--
-- In a system containing a single managed repeater-unit,
-- the statistics object for the repeater-unit.

-- The objects contained under the rptrMonitorRptrInfo subtree are
-- intended for backwards compatibility with implementations of
-- RFC 1516 [11].  In newer implementations (both single- and
-- multiple-repeater implementations), the rptrMonitorTable will
-- be implemented.  It is the preferred source of this information,
-- as it contains the values for all repeaters managed by the
-- agent.  In all cases, the objects in the rptrMonitorRptrInfo
-- subtree are duplicates of the corresponding objects in the
-- first entry of the rptrMonitorTable.


rptrMonitorTransmitCollisions OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "********* THIS OBJECT IS DEPRECATED **********

            For a clause 9 (10Mb/s) repeater, this counter
            is incremented every time the repeater state
            machine enters the TRANSMIT COLLISION state
            from any state other than ONE PORT LEFT
            (Ref: Fig 9-2 [IEEE 802.3 Std]).

            For a clause 27 repeater, this counter is
            incremented every time the repeater core state
            diagram enters the Jam state as a result of
            Activity(ALL) > 1 (fig 27-2 [IEEE 802.3 Std]).
            The approximate minimum time for rollover of this
            counter is 16 hours in a 10Mb/s repeater and 1.6
            hours in a 100Mb/s repeater."
    REFERENCE
            "[IEEE 802.3 Mgt], 30.4.1.1.8, aTransmitCollisions."
    ::= { rptrMonitorRptrInfo 1 }


-- Statistics at the group level.
--
-- In a system containing a single managed repeater-unit,
-- the statistics objects for each group.

rptrMonitorGroupTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RptrMonitorGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
            "********* THIS OBJECT IS DEPRECATED **********

            Table of performance and error statistics for the
            groups within the repeater.  The number of entries
            is the same as that in the rptrGroupTable."
    ::= { rptrMonitorGroupInfo 1 }

rptrMonitorGroupEntry OBJECT-TYPE
    SYNTAX    RptrMonitorGroupEntry
    MAX-ACCESS  not-accessible
    STATUS    deprecated
    DESCRIPTION
            "********* THIS OBJECT IS DEPRECATED **********

            An entry in the table, containing total
            performance and error statistics for a single
            group.  Regular retrieval of the information in
            this table provides a means of tracking the
            performance and health of the networked devices
            attached to this group's ports.

            The counters in this table are redundant in the
            sense that they are the summations of information
            already available through other objects.  However,
            these sums provide a considerable optimization of
            network management traffic over the otherwise
            necessary retrieval of the individual counters
            included in each sum.

            Note:  Group-level counters are
            deprecated in this MIB.  It is recommended
            that management applications instead use
            the repeater-level counters contained in
            the rptrMonTable."
    INDEX    { rptrMonitorGroupIndex }
    ::= { rptrMonitorGroupTable 1 }

RptrMonitorGroupEntry ::=
    SEQUENCE {
        rptrMonitorGroupIndex
            Integer32,
        rptrMonitorGroupTotalFrames
            Counter32,
        rptrMonitorGroupTotalOctets
            Counter32,
        rptrMonitorGroupTotalErrors
            Counter32
    }

rptrMonitorGroupIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "********* THIS OBJECT IS DEPRECATED **********

            This object identifies the group within the
            repeater for which this entry contains
            information."
    ::= { rptrMonitorGroupEntry 1 }

rptrMonitorGroupTotalFrames OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "********* THIS OBJECT IS DEPRECATED **********

            The total number of frames of valid frame length
            that have been received on the ports in this group
            and for which the FCSError and CollisionEvent
            signals were not asserted.  This counter is the
            summation of the values of the
            rptrMonitorPortReadableFrames counters for all of
            the ports in the group.

            This statistic provides one of the parameters
            necessary for obtaining the packet error rate.
            The approximate minimum time for rollover of this
            counter is 80 hours in a 10Mb/s repeater."
    ::= { rptrMonitorGroupEntry 2 }

rptrMonitorGroupTotalOctets OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "********* THIS OBJECT IS DEPRECATED **********

            The total number of octets contained in the valid
            frames that have been received on the ports in
            this group.  This counter is the summation of the
            values of the rptrMonitorPortReadableOctets
            counters for all of the ports in the group.

            This statistic provides an indicator of the total
            data transferred.  The approximate minimum time
            for rollover of this counter is 58 minutes in a
            10Mb/s repeater."
    ::= { rptrMonitorGroupEntry 3 }

rptrMonitorGroupTotalErrors OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
            "********* THIS OBJECT IS DEPRECATED **********

            The total number of errors which have occurred on
            all of the ports in this group.  This counter is
            the summation of the values of the
            rptrMonitorPortTotalErrors counters for all of the
            ports in the group."
    ::= { rptrMonitorGroupEntry 4 }


-- Statistics at the port level.
--

rptrMonitorPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RptrMonitorPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION