ups-mib

很不错java的SNMP应用例子

    DESCRIPTION
            "The output line identifier."
    ::= { upsOutputEntry 1 }

upsOutputVoltage OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "RMS Volts"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present output voltage."
    ::= { upsOutputEntry 2 }

upsOutputCurrent OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "0.1 RMS Amp"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present output current."
    ::= { upsOutputEntry 3 }

upsOutputPower OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "Watts"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present output true power."
    ::= { upsOutputEntry 4 }

upsOutputPercentLoad OBJECT-TYPE
    SYNTAX     INTEGER (0..200)
    UNITS      "percent"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The percentage of the UPS power capacity presently
            being used on this output line, i.e., the greater of
            the percent load of true power capacity and the
            percent load of VA."
    ::= { upsOutputEntry 5 }

--
-- The Bypass group.
--

upsBypass             OBJECT IDENTIFIER ::= { upsObjects 5 }

upsBypassFrequency OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "0.1 Hertz"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present bypass frequency."
    ::= { upsBypass 1 }

upsBypassNumLines OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of bypass lines utilized in this device.
            This entry indicates the number of rows in the bypass
            table."
    ::= { upsBypass 2 }

upsBypassTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF UpsBypassEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A list of bypass table entries.  The number of
            entries is given by the value of upsBypassNumLines."
    ::= { upsBypass 3 }

upsBypassEntry OBJECT-TYPE
    SYNTAX     UpsBypassEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry containing information applicable to a
            particular bypass input."
    INDEX { upsBypassLineIndex }
    ::= { upsBypassTable 1 }

UpsBypassEntry ::= SEQUENCE {
    upsBypassLineIndex  PositiveInteger,
    upsBypassVoltage    NonNegativeInteger,
    upsBypassCurrent    NonNegativeInteger,
    upsBypassPower      NonNegativeInteger
}

upsBypassLineIndex OBJECT-TYPE
    SYNTAX     PositiveInteger
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The bypass line identifier."
    ::= { upsBypassEntry 1 }

upsBypassVoltage OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "RMS Volts"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present bypass voltage."
    ::= { upsBypassEntry 2 }

upsBypassCurrent OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "0.1 RMS Amp"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present bypass current."
    ::= { upsBypassEntry 3 }

upsBypassPower OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "Watts"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present true power conveyed by the bypass."
    ::= { upsBypassEntry 4 }


--
-- The Alarm group.
--

upsAlarm              OBJECT IDENTIFIER ::= { upsObjects 6 }

upsAlarmsPresent OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present number of active alarm conditions."
    ::= { upsAlarm 1 }

upsAlarmTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF UpsAlarmEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A list of alarm table entries.  The table contains
            zero, one, or many rows at any moment, depending upon
            the number of alarm conditions in effect.  The table
            is initially empty at agent startup.  The agent
            creates a row in the table each time a condition is
            detected and deletes that row when that condition no
            longer pertains.  The agent creates the first row with
            upsAlarmId equal to 1, and increments the value of
            upsAlarmId each time a new row is created, wrapping to
            the first free value greater than or equal to 1 when
            the maximum value of upsAlarmId would otherwise be
            exceeded.  Consequently, after multiple operations,
            the table may become sparse, e.g., containing entries
            for rows 95, 100, 101, and 203 and the entries should
            not be assumed to be in chronological order because
            upsAlarmId might have wrapped.

            Alarms are named by an AutonomousType (OBJECT
            IDENTIFIER), upsAlarmDescr, to allow a single table to
            reflect well known alarms plus alarms defined by a
            particular implementation, i.e., as documented in the
            private enterprise MIB definition for the device.  No
            two rows will have the same value of upsAlarmDescr,
            since alarms define conditions.  In order to meet this
            requirement, care should be taken in the definition of
            alarm conditions to insure that a system cannot enter
            the same condition multiple times simultaneously.

            The number of rows in the table at any given time is
            reflected by the value of upsAlarmsPresent."
    ::= { upsAlarm 2 }

upsAlarmEntry OBJECT-TYPE
    SYNTAX     UpsAlarmEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry containing information applicable to a
            particular alarm."
    INDEX { upsAlarmId }
    ::= { upsAlarmTable 1 }

UpsAlarmEntry ::= SEQUENCE {
    upsAlarmId          PositiveInteger,
    upsAlarmDescr       AutonomousType,
    upsAlarmTime        TimeStamp
}

upsAlarmId OBJECT-TYPE
    SYNTAX     PositiveInteger
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A unique identifier for an alarm condition.  This
            value must remain constant."
    ::= { upsAlarmEntry 1 }

upsAlarmDescr OBJECT-TYPE
    SYNTAX     AutonomousType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A reference to an alarm description object.  The
            object referenced should not be accessible, but rather
            be used to provide a unique description of the alarm
            condition."
    ::= { upsAlarmEntry 2 }

upsAlarmTime OBJECT-TYPE
    SYNTAX     TimeStamp
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The value of sysUpTime when the alarm condition was
            detected.  If the alarm condition was detected at the
            time of agent startup and presumably existed before
            agent startup, the value of upsAlarmTime shall equal
            0."
    ::= { upsAlarmEntry 3 }


--
-- Well known alarm conditions.
--

upsWellKnownAlarms    OBJECT IDENTIFIER ::= { upsAlarm 3 }

upsAlarmBatteryBad OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "One or more batteries have been determined to require
            replacement."
    ::= { upsWellKnownAlarms  1 }

upsAlarmOnBattery OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The UPS is drawing power from the batteries."
    ::= { upsWellKnownAlarms  2 }

upsAlarmLowBattery OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The remaining battery run-time is less than or equal
            to upsConfigLowBattTime."
    ::= { upsWellKnownAlarms  3 }


upsAlarmDepletedBattery OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The UPS will be unable to sustain the present load
            when and if the utility power is lost."
    ::= { upsWellKnownAlarms  4 }

upsAlarmTempBad OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "A temperature is out of tolerance."
    ::= { upsWellKnownAlarms  5 }

upsAlarmInputBad OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "An input condition is out of tolerance."
    ::= { upsWellKnownAlarms  6 }

upsAlarmOutputBad OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "An output condition (other than OutputOverload) is
            out of tolerance."
    ::= { upsWellKnownAlarms  7 }

upsAlarmOutputOverload OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The output load exceeds the UPS output capacity."
    ::= { upsWellKnownAlarms  8 }

upsAlarmOnBypass OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The Bypass is presently engaged on the UPS."
    ::= { upsWellKnownAlarms  9 }

upsAlarmBypassBad OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The Bypass is out of tolerance."
    ::= { upsWellKnownAlarms 10 }

upsAlarmOutputOffAsRequested OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The UPS has shutdown as requested, i.e., the output
            is off."
    ::= { upsWellKnownAlarms 11 }

upsAlarmUpsOffAsRequested OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The entire UPS has shutdown as commanded."
    ::= { upsWellKnownAlarms 12 }

upsAlarmChargerFailed OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "An uncorrected problem has been detected within the
            UPS charger subsystem."
    ::= { upsWellKnownAlarms 13 }

upsAlarmUpsOutputOff OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The output of the UPS is in the off state."
    ::= { upsWellKnownAlarms 14 }

upsAlarmUpsSystemOff OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The UPS system is in the off state."
    ::= { upsWellKnownAlarms 15 }

upsAlarmFanFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The failure of one or more fans in the UPS has been
            detected."
    ::= { upsWellKnownAlarms 16 }

upsAlarmFuseFailure OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The failure of one or more fuses has been detected."
    ::= { upsWellKnownAlarms 17 }

upsAlarmGeneralFault OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "A general fault in the UPS has been detected."
    ::= { upsWellKnownAlarms 18 }

upsAlarmDiagnosticTestFailed OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The result of the last diagnostic test indicates a
            failure."
    ::= { upsWellKnownAlarms 19 }

upsAlarmCommunicationsLost OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "A problem has been encountered in the communications
            between the agent and the UPS."
    ::= { upsWellKnownAlarms 20 }

upsAlarmAwaitingPower OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The UPS output is off and the UPS is awaiting the
            return of input power."
    ::= { upsWellKnownAlarms 21 }

upsAlarmShutdownPending OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "A upsShutdownAfterDelay countdown is underway."
    ::= { upsWellKnownAlarms 22 }

upsAlarmShutdownImminent OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The UPS will turn off power to the load in less than