ups-mib

很不错java的SNMP应用例子

UPS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    OBJECT-IDENTITY, Counter32, Gauge32, Integer32, mib-2
        FROM SNMPv2-SMI
    DisplayString, TimeStamp, TimeInterval, TestAndIncr,
      AutonomousType, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF;


upsMIB MODULE-IDENTITY
    LAST-UPDATED "9402230000Z"
    ORGANIZATION "IETF UPS MIB Working Group"
    CONTACT-INFO
           "        Jeffrey D. Case

             Postal: SNMP Research, Incorporated
                     3001 Kimberlin Heights Road
                     Knoxville, TN  37920
                     US

                Tel: [phone]
                Fax: [phone]

             E-mail: [e-mail]"
    DESCRIPTION
            "The MIB module to describe Uninterruptible Power
            Supplies."
    ::= { mib-2 33 }

PositiveInteger ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS       current
    DESCRIPTION
            "This data type is a non-zero and non-negative value."
    SYNTAX       INTEGER (1..2147483647)

NonNegativeInteger ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS       current
    DESCRIPTION
            "This data type is a non-negative value."
    SYNTAX       INTEGER (0..2147483647)
upsObjects            OBJECT IDENTIFIER ::= { upsMIB 1 }


--
-- The Device Identification group.
--      All objects in this group except for upsIdentName and
--      upsIdentAttachedDevices are set at device initialization
--      and remain static.
--

upsIdent              OBJECT IDENTIFIER ::= { upsObjects 1 }

upsIdentManufacturer OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..31))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The name of the UPS manufacturer."
    ::= { upsIdent 1 }

upsIdentModel OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The UPS Model designation."
    ::= { upsIdent 2 }

upsIdentUPSSoftwareVersion OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The UPS firmware/software version(s).  This variable
            may or may not have the same value as
            upsIdentAgentSoftwareVersion in some implementations."
    ::= { upsIdent 3 }

upsIdentAgentSoftwareVersion OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..63))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The UPS agent software version.  This variable may or
            may not have the same value as
            upsIdentUPSSoftwareVersion in some implementations."
    ::= { upsIdent 4 }

upsIdentName OBJECT-TYPE
    SYNTAX     DisplayString (SIZE(0..63))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "A string identifying the UPS.  This object should be
            set by the administrator."
    ::= { upsIdent 5 }

upsIdentAttachedDevices OBJECT-TYPE
    SYNTAX     DisplayString (SIZE(0..63))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
            "A string identifying the devices attached to the
            output(s) of the UPS.  This object should be set by
            the administrator."
    ::= { upsIdent 6 }


--
-- Battery Group
--

upsBattery            OBJECT IDENTIFIER ::= { upsObjects 2 }

upsBatteryStatus OBJECT-TYPE
    SYNTAX     INTEGER {
        unknown(1),
        batteryNormal(2),
        batteryLow(3),
        batteryDepleted(4)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The indication of the capacity remaining in the UPS
            system's batteries.   A value of batteryNormal
            indicates that the remaining run-time is greater than
            upsConfigLowBattTime.  A value of batteryLow indicates
            that the remaining battery run-time is less than or
            equal to upsConfigLowBattTime.  A value of
            batteryDepleted indicates that the UPS will be unable
            to sustain the present load when and if the utility
            power is lost (including the possibility that the
            utility power is currently absent and the UPS is
            unable to sustain the output)."
    ::= { upsBattery 1 }

upsSecondsOnBattery OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "If the unit is on battery power, the elapsed time
            since the UPS last switched to battery power, or the
            time since the network management subsystem was last
            restarted, whichever is less.  Zero shall be returned
            if the unit is not on battery power."
    ::= { upsBattery 2 }

upsEstimatedMinutesRemaining OBJECT-TYPE
    SYNTAX     PositiveInteger
    UNITS      "minutes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "An estimate of the time to battery charge depletion
            under the present load conditions if the utility power
            is off and remains off, or if it were to be lost and
            remain off."
    ::= { upsBattery 3 }

upsEstimatedChargeRemaining OBJECT-TYPE
    SYNTAX     INTEGER (0..100)
    UNITS      "percent"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "An estimate of the battery charge remaining expressed
            as a percent of full charge."
    ::= { upsBattery 4 }

upsBatteryVoltage OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "0.1 Volt DC"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The magnitude of the present battery voltage."
    ::= { upsBattery 5 }

upsBatteryCurrent OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "0.1 Amp DC"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present battery current."
    ::= { upsBattery 6 }

upsBatteryTemperature OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "degrees Centigrade"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The ambient temperature at or near the UPS Battery
            casing."
    ::= { upsBattery 7 }


--
-- Input Group
--

upsInput              OBJECT IDENTIFIER ::= { upsObjects 3 }

upsInputLineBads OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A count of the number of times the input entered an
            out-of-tolerance condition as defined by the
            manufacturer.  This count is incremented by one each
            time the input transitions from zero out-of-tolerance
            lines to one or more input lines out-of-tolerance."
    ::= { upsInput 1 }


upsInputNumLines OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of input lines utilized in this device.
            This variable indicates the number of rows in the
            input table."
    ::= { upsInput 2 }

upsInputTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF UpsInputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A list of input table entries.  The number of entries
            is given by the value of upsInputNumLines."
    ::= { upsInput 3 }

upsInputEntry OBJECT-TYPE
    SYNTAX     UpsInputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry containing information applicable to a
            particular input line."
    INDEX { upsInputLineIndex }
    ::= { upsInputTable 1 }

UpsInputEntry ::= SEQUENCE {
    upsInputLineIndex   PositiveInteger,
    upsInputFrequency   NonNegativeInteger,
    upsInputVoltage     NonNegativeInteger,
    upsInputCurrent     NonNegativeInteger,
    upsInputTruePower   NonNegativeInteger
}

upsInputLineIndex OBJECT-TYPE
    SYNTAX     PositiveInteger
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The input line identifier."
    ::= { upsInputEntry 1 }

upsInputFrequency OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "0.1 Hertz"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present input frequency."
    ::= { upsInputEntry 2 }

upsInputVoltage OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "RMS Volts"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The magnitude of the present input voltage."
    ::= { upsInputEntry 3 }

upsInputCurrent OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "0.1 RMS Amp"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The magnitude of the present input current."
    ::= { upsInputEntry 4 }

upsInputTruePower OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "Watts"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The magnitude of the present input true power."
    ::= { upsInputEntry 5 }


--
-- The Output group.
--

upsOutput             OBJECT IDENTIFIER ::= { upsObjects 4 }

upsOutputSource OBJECT-TYPE
    SYNTAX     INTEGER {
        other(1),
        none(2),
        normal(3),
        bypass(4),
        battery(5),
        booster(6),
        reducer(7)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present source of output power.  The enumeration
            none(2) indicates that there is no source of output
            power (and therefore no output power), for example,
            the system has opened the output breaker."
    ::= { upsOutput 1 }

upsOutputFrequency OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    UNITS      "0.1 Hertz"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The present output frequency."
    ::= { upsOutput 2 }

upsOutputNumLines OBJECT-TYPE
    SYNTAX     NonNegativeInteger
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of output lines utilized in this device.
            This variable indicates the number of rows in the
            output table."
    ::= { upsOutput 3 }

upsOutputTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF UpsOutputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "A list of output table entries.  The number of
            entries is given by the value of upsOutputNumLines."
    ::= { upsOutput 4 }

upsOutputEntry OBJECT-TYPE
    SYNTAX     UpsOutputEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "An entry containing information applicable to a
            particular output line."
    INDEX { upsOutputLineIndex }
    ::= { upsOutputTable 1 }

UpsOutputEntry ::= SEQUENCE {
    upsOutputLineIndex   PositiveInteger,
    upsOutputVoltage     NonNegativeInteger,
    upsOutputCurrent     NonNegativeInteger,
    upsOutputPower       NonNegativeInteger,
    upsOutputPercentLoad INTEGER
}

upsOutputLineIndex OBJECT-TYPE
    SYNTAX     PositiveInteger
    MAX-ACCESS not-accessible
    STATUS     current